Kit contents:
• 1 pointed chisel
• 1 narrow flat chisel, 20 mm
• 1 wide flat chisel, 40 mm

Reversible impact wrench, made from composite material
Features:
• Double hammer impulse device
• Lightweight and well-balanced for enhanced ease of use
• Reversible lever
• Three power adjustable screwing positions
• Exhaust through handle
• Vibration-damping handle
Free speed 5,000 rpm
Max. torque 2,100 Nm
Bolt capacity Cl 8.8 M3046 mm
Bolt capacity Cl 12.9 M2741 mm
Air inlet 3/8" GAS
Operating pressure 6.2 bar
Internal hose size (Ø) 10 mm
Mean air consumption 221 l/min
Weight 3.7 kg

Rechargeable, ultracompact spotlight
• Abundant ready Lighting: with a maximum lighting capacity of 720 lumens, and running on both battery and cable, it is always ready to use
• Can be placed anywhere:
on flat surfaces: with rubber feet on three sides or 1/4" drive for stands (camera-like standard)
on metal structures: with unscrewable magnet or hook that can be rotated 360 degrees
• Compact: no more than 85x100x155 mm in size, it can be easily replaced in tool bag and used in small areas
• Sturdy: designed to withstand extremely severe mechanical stress. Guaranteed durability


• IP65 - without external power supply
• Dual brightness: 720 / 360 lumens
• Lithium polymer battery 7.4 V 4000 mAh
• Life 4-7 hours (depending on brightness)
•12V cigarette lighter or 230V plug socket charger, it also allows operation with a completely flat battery
• 12V rubber bayonet connector
• Recharge/on-off cable, 5 m long
● White light, 4500 °K
 820 g

Main features
• Battery voltage: 12V
• Battery capacity: 2Ah
• Energy capacity: 24Wh
• Battery type: Li-ion

Digital brushless motor for significantly improved performance: increased power, reduced energy consumption, extended motor service life, improved power supply from button.

Features:
• 3 operating modes: drilling, screwing and impact drilling
• Compact: no more than 210 mm in length
• Ergonomic nonslip handle
• Selector switch, screwing-unscrewing-locking modes (for transportation)
• Gear case made entirely from metal
• Built-in LED light for working in poor visibility conditions
• Belt clip (right/left side)
• Additional side handle for high-torque operation
• Supplied in a hard case with 2 lithium ion batteries (4 Ah) and quick charger

Technical features:
• Max. torque: 80 Nm
• 20-position torque adjustment
• 13-mm metal auto-chuck
• Double mechanical speed with steel gears (0-450/1650 rpm)
• Max. drilling diameter in wood: 55 mm
• Max. drilling diameter in metal: 13 mm
• Max. drilling diameter in masonry: 13 mm


 5,5 kg
 490x370x125 mm

• Digital BRUSHLESS motor
Significantly improved performance: increased power, reduced energy consumption, extended motor service life, improved power supply from button

• 3 operating modes: drilling, screwing and impact drilling
• Compact: no more than 210 mm in length
• Ergonomic nonslip handle
• Selector switch, screwing-unscrewing-locking modes (for transportation)
• Gear case made entirely from metal
• Built-in LED light for working in poor visibility conditions
• Belt clip (right/left side)
• Additional side handle for high-torque operation
• Supplied in a hard case, without batteries and charger

Main features:
• Max. torque: 80 Nm
• 20-position torque adjustment
• 13-mm metal auto-chuck
• Double mechanical speed with steel gears (0-450/1650 rpm)
• Max. drilling diameter in wood: 55 mm
• Max. drilling diameter in metal: 13 mm
• Max. drilling diameter in masonry: 13 mm

Ideal for drilling in different materials, including wood, metal, plastic, masonry and concrete

Powerful 910W motor
Linear, compact design with ergonomic, non-slip handle

Metal auto-chuck, 13 mm
Reversible variable speed
Gear case made entirely from metal
Switch lock for improved comfort of use
Main features:
• Max. drilling diameter in wood: 32 mm
• Max. drilling diameter in metal: 13 mm
• Max. drilling diameter in masonry: 13 mm
• No-load speed: 0-2800 rpm
• Tangle-free power supply cord length: 4 m

Supplied accessories:
• Metal auto-chuck, 13 mm
• Additional side handle that can be rotated 360°
• Depth rod


 4,3 kg
 420x320x120 mm

Ultracompact: no more than 160 mm in length; ultralightweight: no more than 1 kg, with battery, and perfectly balanced.
Ideal for jobs in small areas, provides high torque (80 Nm), one-handed operation.

Features:
• 1/4" hexagon drive with locknut
• belt clip (right/left side)
• front LED
• selector switch, screwing-unscrewing-locking modes (for transportation)
• ergonomic nonslip handle
• gearcase made entirely of metal
• 2Ah batteries with charge indicator on impact wrench body
• supplied in a hard case with 2 lithium ion batteries (2 Ah) and quick charger (50 min)

Ultracompact: no more than 170 mm in length; ultralightweight: no more than 1.1 kg, with battery, and perfectly balanced

Features:
• Double mechanical speed with steel gears and 20-position clutch
• Torque up to 30 Nm and 1300 rpm (400 rpm in 1st gear); drills diameters up to 10 mm in steel and 20 mm in wood
• 2Ah batteries and charge indicator on drill body
• Ergonomic nonslip handle
• Front LED
• 10-mm autochuck
• Belt clip (right/left side)
• Selector switch, screwing-unscrewing-locking modes (for transportation)
• Supplied in a hard case with 2 lithium ion batteries (2 Ah) and quick charger (50 min)

Main features:
• LED charge level indicator
• Rated input voltage: 110V-240V ~ 50/60Hz
• Output voltage: 20V
• Charging current: 6A
• Rated input power: 145W

20V 2Ah battery charging time: 45 min
20V 4Ah battery charging time: 90 min
20V 6Ah battery charging time: 120 min

With button and 3 coloured LED charge level indicators.

Main features:
• Battery voltage: 20V
• Battery capacity: 2Ah
• Energy capacity: 40Wh
• Battery type: Li-ion

With button and 3 coloured LED charge level indicators.

Main features:
• Battery voltage: 20V
• Battery capacity: 4Ah
• Energy capacity: 80Wh
• Battery type: Li-ion

With button and 3 coloured LED charge level indicators.

Features:
• Battery voltage: 20V
• Battery capacity: 6Ah
• Energy capacity: 120Wh
• Battery type: Li-ion

Digital BRUSHLESS motor for increased power, reduced energy consumption, extended motor service life, improved power supply from button.

Main features:
• Protection against accidental restart
• Additional handle, can be placed on both sides
• Tool-less disc cover (quick release)
• Spindle lock device for quick disc changes
• Lock on/off slide switch
• Air vents protected against dust infiltration and providing optimal cooling
• Supplied in a hard case with 2 4 Ah lithium ion batteries and a quick charger

Technical data:
• Disc diameter (not included): 125/115 mm
• Free speed: 8.000 rpm
• Tool spindle thread: M14
• Tangle-free cable length: 4 m

Digital BRUSHLESS motor for significantly improved performance: increased power, reduced energy consumption, extended motor service life, improved power supply from button.

Features:
• 3 different torque settings and rpms in screwing mode
• Up to 600 Nm unscrewing torque
• 1/2" male square drive with bush retaining ring
• Gear case made entirely from metal
• Ergonomic nonslip handle
• Selector switch, screwing-unscrewing-locking modes (for transportation)
• Built-in LED light for working in poor visibility conditions
• Belt clip (right/left side)

Tightening
3 torque settings and rpms (low - medium - height) available):
1: 200 Nm; 1000 rpm
2: 350 Nm; 1500 rpm
3: 550 Nm; 1800 rpm

Untightening
1: 600 Nm: impact wrench applies maximum torque non-stop (free unscrewing)
2: 600 Nm - Autostop: impact wrench applies maximum torque until nut is fully unscrewed, and then stops automatically (single impact unscrewing)

Supplied in handy hard case complete with 2 lithium ion batteries (4 Ah) and quick charger.
Battery voltage 20 V
Battery capacity 4.0 Ah
Drive 1/2" square
Max. tightening torque (Nm) 200 / 350 / 550
Max. untightening torque (Nm) 600
Weight without battery 2.3 kg

Digital brushless motor for significantly improved performance: increased power, reduced energy consumption, extended motor service life, improved power supply from button.

Features:
• 3 operating modes: drilling, screwing and impact drilling
• Compact: no more than 210 mm in length
• Ergonomic nonslip handle
• Selector switch, screwing-unscrewing-locking modes (for transportation)
• Gear case made entirely from metal
• Built-in LED light for working in poor visibility conditions
• Belt clip (right/left side)
• Additional side handle for high-torque operation
• Supplied in a hard case with 2 lithium ion batteries (4 Ah) and quick charger

Technical features:
• Max. torque: 80 Nm
• 20-position torque adjustment
• 13-mm metal auto-chuck
• Double mechanical speed with steel gears (0-450/1650 rpm)
• Max. drilling diameter in wood: 55 mm
• Max. drilling diameter in metal: 13 mm
• Max. drilling diameter in masonry: 13 mm