Features:
● Ultra-strength instant adhesion
● High mechanical resistance, final force and elastic module
● Free from isocyanates, phthalates, solvents and silicone
● Permanently elastic, does not shrink, bubble-free, odourless
● Resistant to humidity and weathering
● Adheres primer-free to most substrates, including wet ones


DIRECTION FOR USE
Apply the adhesive in vertical strips 10-20 cm apart. Bring the materials into position and press hard, so that the adhesive can be at least 2-3 mm thick. Do not apply the adhesive in dots.
Application temperature: +5 °C ÷ +40 °C (for both substrates and the environment). Extrude by means of a bonding gun and the ‘V’ nozzle supplied with the adhesive. The substrates must be solid and free from grease and dust. Test before application.

Everbuild Clear Weatherproof Tape with aggressive adhesive is ideal for jointing and repairing all PVC and polythene sheets and many other uses in construction, industry and the home. Also ideal for repairing cracks in glass and acrylic without obscuring vision/light. With easy tear serrated edges to enable quicker application. Specification: Size: 50mm x 10m

Faithfull Farmer's Silage Tape is extra wide and made from durable, high strength PVC. Ideal for repair jobs around the farm, including silage patching, electrical insulation and banding. Specification: Colour: Black Width: 75mmLength: 20m

Everbuild American Duct Tape has a multitude of uses including waterproofing and windproofing scaffolding, windows, doors and exposed roofing. It can also be used on vertical and overhead applications due to its unique hold strength. American Duct Tape can also be used to temporarily hold DPM, timber, guttering, sheet material or any other building material that needs to be held in place without the need to clamp. It will stick to most surfaces and substrates and can be used internally as well as externally. Colour: Orange.Size: 50mm x 25m.

This ForgeFix ForgeFast Torx Compatible Wood Screw Pack contains a selection of the most popular sizes of professional, high performance multi purpose woodscrews. With a universally accepted, Torx compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power.The patented drill and drive thread reduce splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel.With an 'Elementech 400' coating providing an anti-corrosive metal finish which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6. It is Salt Spray tested to 400 hours.Contains:1 x Box of 200 ForgeFast Torx Compatible Wood Screws ZY 3.0 x 25mm.1 x Box of 200 ForgeFast Torx Compatible Wood Screws ZY 3.5 x 30mm.1 x Box of 200 ForgeFast Torx Compatible Wood Screws ZY 3.5 x 40mm.1 x Box of 200 ForgeFast Torx Compatible Wood Screws ZY 4.0 x 30mm.1 x Box of 200 ForgeFast Torx Compatible Wood Screws ZY 4.0 x 40mm.1 x Box of 200 ForgeFast Torx Compatible Wood Screws ZY 4.0 x 50mm.1 x Box of 200 ForgeFast Torx Compatible Wood Screws ZY 5.0 x 50mm.1 x Box of 100 ForgeFast Torx Compatible Wood Screws ZY 5.0 x 60mm.1 x Box of 100 ForgeFast Torx Compatible Wood Screws ZY 5.0 x 70mm.1 x Box of 100 ForgeFast Torx Compatible Wood Screws ZY 5.0 x 80mm.1 x Box of 100 ForgeFast Torx Compatible Wood Screws ZY 5.0 x 100mm.

The ForgeFast Elite Performance Tongue Groove Flooring Screw is specifically designed to fix tongue and groove floorboards to timber flooring joists. The design ensures no damage is caused when fixed through the tongue. The reduced head with under head ribs is designed for self-countersinking allowing a very flush fit with the next board. The anti-split, fast start thread engages quickly to form a rapid pick-up at the start of insertion. Reduced drive torque and no pre-drilling mean quick installations, whilst the fix remains firm with improved pull-out. Double cutting point reduces splitting and drive time, capable of penetrating 0.8mm steel. A firmer fix with reduced drive torque and improved pull-out provided by a serrated cutting thread. Improved holding power from reinforced countersunk neck. Concealed countersinking from reduced ribbed head. TORX compatible insert for higher transmission of power. CE approved for use in load-bearing timber construction. Molecular lubrication. Elementech 400 surface coating provides corrosion resistance. Salt spray tested to 400 hours. A Non-Cr, Cr3, yellow/zinc plated surface is environmentally friendly. Lasts 6 times longer than standard zinc screw protective coating. Suitable for interior use.

This ForgeFix ForgeFast Torx Compatible Wood Screw Organiser contains a selection of the most popular sizes. With a universally accepted, TORX compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The patented drill and drive thread reduce splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. With an 'Elementech 400' coating providing an anti-corrosive metal finish which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6. It is Salt Spray tested to 400 hours. Contains: 150 x ForgeFast TORX Compatible Wood Screws ZY 3.5 x 16mm100 x ForgeFast TORX Compatible Wood Screws ZY 3.5 x 25mm180 x ForgeFast TORX Compatible Wood Screws ZY 3.5 x 30mm130 x ForgeFast TORX Compatible Wood Screws ZY 4.0 x 25mm140 x ForgeFast TORX Compatible Wood Screws ZY 4.0 x 30mm100 x ForgeFast TORX Compatible Wood Screws ZY 4.0 x 40mm80 x ForgeFast TORX Compatible Wood Screws ZY 4.0 x 50mm55 x ForgeFast TORX Compatible Wood Screws ZY 5.0 x 50mm65 x ForgeFast TORX Compatible Wood Screws ZY 5.0 x 80mm

The ForgeFast Elite Performance MDF Chipboard Flooring Screw is specifically designed for fixing flooring grade boards to timber structures. The double cutting point breaks through the hard, dense surface of flooring grade materials. The anti-split, fast start thread can then engage quickly to form a rapid pick-up at the start of insertion. Reduced drive torque and no pre-drilling mean quick installations, whilst the fix remains firm with improved pull-out. The Under head ribs are designed for self-countersinking producing a flush secure finish on flooring. Double cutting point reduces splitting and drive time and is capable of penetrating 0.8mm steel. A firmer fix with reduced drive torque and improved pull-out provided by a serrated cutting thread. Improved holding power from the reinforced countersunk neck. Improved countersinking from the ribbed head. TORX compatible insert for a higher transmission of power. CE approved for use in load-bearing timber construction. Molecular lubrication. Elementech 400 surface coating provides corrosion resistance. Salt spray tested to 400 hours. A Non-Cr, Cr3, yellow/zinc plated surface is environmentally friendly. Lasts up to 6 times longer than standard zinc screw protective coating. Suitable for interior use.

The Forgefix Phillips fine thread, wafer head Drywall Screws are zinc plated for increased durability. They come complete with a Phillips No.2 insert bit.The screws have a self drilling hardened point designed for fitting dry linings to steel framework without drilling pilot holes. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. Zinc plating is the most common, economy, electroplated coating which is normally applied to ferrous components to give enhanced corrosion protection. The relatively low cost, protective nature and attractive appearance of zinc make it a popular coating for nuts, bolts, washers, screws, and similar interior components. In addition, zinc serves as an effective undercoat for paints when high corrosion performance is required. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. The wafer head distributes the load under the screw head, offering a firm positive fixing in a similar way to that of a washer. Fine thread screws have an extremely sharp point which not only pierces the plasterboard skin but will also allow the screw to drill through thin steel base structures.

These Forgefix Pozidriv, round head Corrugated Roofing Screws are Zinc plated for increased corrosion resistance. They come complete with a specially designed plastic fold over cap to suit installation of corrugated roofing. The plastic cap has a large surface area to improve weather resistance. Screw size: 5.0 x 50mm (Pozi). APPLICATIONSuitable for fixing corrugated sheeting to timber sub frames. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45 to the slots for the driver. Round heads have a flat under head surface making the screw ideal for laying flat on sheet material of all types, reducing deformation.

Head: Wafer HeadFinish: Zinc PlatedSize: 4.8 x 80mmPack: Box 100

Head: Wafer HeadFinish: Zinc PlatedSize: 4.8 x 70mmPack: Box 100

This Forgefix ForgeFast Pozi Compatible Wood Screw Pack contains a selection of the most popular sizes of professional, high-performance multipurpose woodscrews. With a universally accepted, Pozi compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The patented drill and drive thread reduce splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides a faster bite and is capable of piercing 0.8mm steel. With an 'Elementech 400' coating providing an anti-corrosive metal finish which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6. It is Salt Spray tested to 400 hours. Contains: 1 x Box of 200 ForgeFast Pozi Compatible Wood Screws ZY 3.0 x 25mm.1 x Box of 200 ForgeFast Pozi Compatible Wood Screws ZY 3.5 x 30mm.1 x Box of 200 ForgeFast Pozi Compatible Wood Screws ZY 3.5 x 40mm.1 x Box of 200 ForgeFast Pozi Compatible Wood Screws ZY 4.0 x 30mm.1 x Box of 200 ForgeFast Pozi Compatible Wood Screws ZY 4.0 x 40mm.1 x Box of 200 ForgeFast Pozi Compatible Wood Screws ZY 4.0 x 50mm.1 x Box of 200 ForgeFast Pozi Compatible Wood Screws ZY 5.0 x 50mm.1 x Box of 100 ForgeFast Pozi Compatible Wood Screws ZY 5.0 x 60mm.1 x Box of 100 ForgeFast Pozi Compatible Wood Screws ZY 5.0 x 70mm.1 x Box of 100 ForgeFast Pozi Compatible Wood Screws ZY 5.0 x 80mm.1 x Box of 100 ForgeFast Pozi Compatible Wood Screws ZY 5.0 x 100mm.

Weller W61D Controlled Temperature Iron is suitable for a broad range of demanding soldering applications on electrical components with extremely high heat sensitivity. The industrial soldering irons of the W series have a solidly constructed heating element and a wide selection of long-life soldering tips. The tips are made of pure copper and are available with temperature ratings of 260C, 316C, 425C and 480C. Temperature is controlled according to the Weller Magnastat principle. The metal cap that is firmly secured to the back of the soldering tip is the temperature sensor of this system; the Magnastat. The Magnastat system operates through a ferrous magnetic sensing device and is extremely stable, it does not deteriorate through ageing or metal fatigue. A further advantage of this design is that the soldering iron is completely switched off while the tip is being changed so that the heating element can not burn out in the absence of a tip. Specification: Watt: 60WVoltage: 230V

Weller W201D Controlled Temperature Iron is suitable for a broad range of demanding soldering applications on electrical components with extremely high heat sensitivity. The industrial soldering irons of the W series have a solidly constructed heating element and a wide selection of long-life soldering tips. The tips are made of pure copper and are available with temperature ratings of 260C, 316C, 425C and 480C. Temperature is controlled according to the Weller Magnastat principle. The metal cap that is firmly secured to the back of the soldering tip is the temperature sensor of this system; the Magnastat. The Magnastat system operates through a ferrous magnetic sensing device and is extremely stable, it does not deteriorate through ageing or metal fatigue. A further advantage of this design is that the soldering iron is completely switched off while the tip is being changed so that the heating element can not burn out in the absence of a tip. Specification: Watt: 200WVoltage: 230V

Weller W101D Controlled Temperature Iron is suitable for a broad range of demanding soldering applications on electrical components with extremely high heat sensitivity. The industrial soldering irons of the W series have a solidly constructed heating element and a wide selection of long-life soldering tips. The tips are made of pure copper and are available with temperature ratings of 260C, 316C, 425C and 480C. Temperature is controlled according to the Weller Magnastat principle. The metal cap that is firmly secured to the back of the soldering tip is the temperature sensor of this system; the Magnastat. The Magnastat system operates through a ferrous magnetic sensing device and is extremely stable, it does not deteriorate through ageing or metal fatigue. A further advantage of this design is that the soldering iron is completely switched off while the tip is being changed so that the heating element can not burn out in the absence of a tip. Specification: Watt: 100WVoltage: 230V

The Weller Brass Wire Sponge Cleaner allows you to clean and remove residual solder from your soldering iron tips without water. Simple to use, plunge the iron tip into the brass coils. Cleaning your iron tips helps to prevent rust and extend life. Comes with a slip-resistant, silicone holder.

Fixing with rivets is easy. In just a few quick steps you can achieve a tight, secure and permanent bond. There are many applications for rivets, including fixing number plates, all types of metal sheets, repairing exhausts on motorbikes, handles of a school bag, strengthening plastic sheets or leather coverings and decorating fabrics. The Rapid RP100 Heavy-Duty Press Less Hand Riveter has a built-in power reduction mechanism to reduce the effort needed. It is ideal for use on tough materials such as metal. The power reduction mechanism and long arms substantially reduce the force needed to fix the rivet, allowing the tool to be used for long lengths of time without fatigue. The RP100 works with both stainless steel and aluminium rivets with 3.2, 4 or 4.8mm diameters. When the rivet is fixed, the rivet pin will automatically fall down into a socket, ensuring no time is wasted collecting them from the ground. It has a soft grip handle for comfort and interchanging nozzles to fix all diameters of rivets. A wrench is integrated into the handle to make changing the nozzle quick and easy. The tool is also covered by a 5 year guarantee. The RP100 works with both stainless steel and aluminium rivets with 3.2, 4 or 4.8mm diameters.

The Blue Spot 30W Soldering Iron is ideal for all soldering jobs for professional and DIYer alike. The set includes a handy stand for when working on small jobs where multiple parts are involved. The soldering iron has a 1.1m cable with a BS approved 230V / 13A plug.

These Forgefix Spring Head Nails are a popular roofing nail for corrugated roofing. Their twisted shank assists in absorbing movement that may occur in the roofing construction. They are galvanised for increased resistance to corrosion. APPLICATION:Galvanised spring head nails are most commonly used for securing corrugated sheeting and other roofing materials.Can be used with a rubber or plastic spat washer. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.

The Stanley HT150 Heavy-duty SharpShooter Hammer Tacker is ideal for furniture fabrication and building insulation. It will accommodate 2 sticks of G-type staples. It has a heavy-duty steel construction and features a full rubber grip which absorbs shock and protects hands. Specification: Fires: TRA7 Type G 140 Staples: 6-10mm

The Rapid R83 is an ergonomic, high-capacity tacker for use with Rapid fine wire No.13 Staples 6-14mm and No.8 Brads 15mm. Fine wire staples are barely visible and have minimal effect on textile fibres; ideal for demanding jobs such as securing textiles, canvas, leather, posters, netting, labels, beading or frames. The tacker has all-steel wear parts to ensure strength and durability. It is manually operated and has a noise damper and recoil free action. Other features include an adjustable impact force with a maximum setting for long staples or hard materials and a staple window to show the length of staples in use and when it is time to reload. Covered by a 2 year guarantee Fires:Fine wire staples - Type 13 6mm to 14mm.No8 Brads 15mm.

These Rapid No.8 Brad Nails have the following specification: Leg Length: 50mmGauge: 18Suitable For: PB131 PBS151

These Rapid No.8 Brad Nails have the following specification: Leg Length: 40mmGauge: 18Suitable For: PB131 PBS151

These Rapid No.8 Brad Nails have the following specification: Leg Length: 30mmGauge: 18Suitable For: EN330, PBS121, PB131 PBS151

These Rapid No.8 Brad Nails have the following specification: Leg Length: 25mmGauge: 18Suitable For: R606, EN330, PBS121, PB131 PBS151

Type: 606 (galvanised)Size: 30mm leg length.Quantity: Box 4000. These staples fit in the PBS121 pneumatic tacker and R606 electric tacker.

Type: 606 (galvanised)Size: 25mm leg length.Quantity: Box 4000. These staples fit in the PBS121 pneumatic tacker and R606 electric tacker.

Type: 606 (galvanised)Size: 18mm leg length.Quantity: Box 4000. These staples fit in the PBS121 pneumatic tacker and R606 electric tacker.

Rapid No. 140 precision cut flat wire staple are made from high-performance stainless steel for strength and durability. Flat wire staples have a larger holding area against the material, making it ideal for thin plastic or insulation. Stainless steel wire classification class 2 AISI 304 ideal for outdoor use or use in humid areas. Type: 140 (stainless steel).Size: 10mm leg lengthQuantity: 650. For use with: Rapid R34, R44, R64, ALU740, ALU840, ALU940, R11, R311, R54, E-tac, ESN114, R214, PS111 tackers.

The Arrow HT50P Professional Hammer Tacker ideal for furniture fabrication and building insulation, with an all steel construction and durable chrome finish and high carbon hardened steel working parts. With a jam resistant mechanism, precision locked rear loading, retractable striking edge and specially designed power grip handle. This hammer tacker will tackle many jobs which require speed and is ideal for furniture fabrication and building insulation. Fires: T50 Staples 8-12mm.

These Rawlplug Rawlbolt Loose Bolts have the following specification: AnchorDiameter: 10mmExternal Diameter: 16mmLength: 140mm FixtureMax. Thickness: 75mmHole Diameter: 11mm Hole Diameter in Substrate: 16mmInstallation Torque: 27Wrench Size: 17Min. Hole Depth in Substrate: 65mmMin. Installation Depth: 60mmMin. Substrate Thickness: 100mmMin. Spacing: 50mmMin. Edge Distance: 75mm Pack Quantity: Bag of 5

These Rawlplug Rawlbolt Loose Bolts have the following specification: AnchorDiameter: 10mmExternal Diameter: 16mmLength: 90mm FixtureMax. Thickness: 25mmHole Diameter: 11mm Hole Diameter in Substrate: 16mmInstallation Torque: 27Wrench Size: 17Min. Hole Depth in Substrate: 65mmMin. Installation Depth: 60mmMin. Substrate Thickness: 100mmMin. Spacing: 50mmMin. Edge Distance: 75mm Pack Quantity: Bag of 5

These Rawlplug Rawlbolt Loose Bolts have the following specification: AnchorDiameter: 10mmExternal Diameter: 16mmLength:75mm FixtureMax. Thickness: 10mmHole Diameter: 11mm Hole Diameter in Substrate: 16mmInstallation Torque: 27Wrench Size: 17Min. Hole Depth in Substrate: 65mmMin. Installation Depth: 60mmMin. Substrate Thickness: 100mmMin. Spacing: 50mmMin. Edge Distance: 75mm Pack Quantity: Bag of 5

The Link2Home Fixed Wall Mount for Flat Panel TVs is so aesthetically pleasing and compact that it looks like part of your TV. Easy to install on any type of wall, no studs required, and compatible with unlimited VESA/universal mounting options for all Flat Panel TVs up to 68kg. With the auto-locking safety mechanism, the TV mount can be secure without the use of pull tabs, screws, or strips.

These Forgefix Worktop Clamps eliminate the need for surface mounted worktop joining strips. The nut is tightened onto the bolt, pressing the caps against the walls of the 35mm diameter holes.The clamps are Zinc plated for increased resistance to corrosion. APPLICATION:Worktop joints. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

The Everbuild Spare Nozzle and Push Disc Refill Pack contains 10 clip-on nozzles, and a push disc for use with Foil Pack applicator guns and foil packs.

The Everbuild Anchorset Green is a styrene-free rapid curing chemical anchoring system designed for high strength fixing of railings, satellite dishes, signs, brackets, and other fixtures which carry heavy loads. The unique EASY-FLOW technology of Anchorset Green means the twin bag system within the cartridge enables the product to be applied using a standard cartridge gun and is supplied with a mixer nozzle. Everbuild Anchorset Green has a wide range of applications including fixing wall ties, fixing bolts and screws into a wide range of building substrates, securing machinery into floors, fixing studs and starter bars. Not suitable for non-porous substrates i.e., metal and PVC and nor should it be used on wet surfaces. Size: 300 ml.Colour: Grey.

This Faithfull Fire Brigade Snap Hook has the following specifications:; Link Diameter: 6mm.; Length: 60mm.; Finish: Stainless Steel.; Quantity: 2.

This Faithfull Staple On Plate has a; Black Japanned finish for increased durability.

Thompson's Water Seal 5 litre utilises hydrophobic technology to deliver invisible protection against water damage. The penetrating formulation travels deep into exterior dry porous surfaces to form a breathable membrane allowing moisture vapour inside the substrate to evaporate whilst protecting against water penetration and damage. Thompson's Water Seal has a unique formulation which, unlike some waterproofers, penetrates the surface therefore waterproofing even after the initial beading is gone. It will not be destroyed by ultraviolet light and is long lasting even under heavy moisture conditions. Assuming application instructions and coverage guidelines are adhered to, it provides effective water repellency for years. Helps prevent damage caused by freezing and thawing Suitable for use on brick, concrete and stone. For exterior use only. Specifications: Size: 5L.

Thompson's Water Seal utilises hydrophobic technology to deliver invisible protection against water damage. The penetrating formulation travels deep into exterior dry porous surfaces to form a breathable membrane allowing moisture vapour inside the substrate to evaporate whilst protecting against water penetration and damage. Thompson's Water Seal has a unique formulation which, unlike some waterproofers, penetrates the surface therefore waterproofing even after the initial beading is gone. It will not be destroyed by ultraviolet light and is long lasting even under heavy moisture conditions. Assuming application instructions and coverage guidelines are adhered to, it provides effective water repellency for years. Helps prevent damage caused by freezing and thawing. Suitable for use on brick, concrete and stone. For exterior use only. Specifications: Size: 2.5L.

Thompson's Water Seal utilises hydrophobic technology to deliver invisible protection against water damage. The penetrating formulation travels deep into exterior dry porous surfaces to form a breathable membrane allowing moisture vapour inside the substrate to evaporate whilst protecting against water penetration and damage. Thompson's Water Seal has a unique formulation which, unlike some waterproofers, penetrates the surface therefore waterproofing even after the initial beading is gone. It will not be destroyed by ultraviolet light and is long lasting even under heavy moisture conditions. Assuming application instructions and coverage guidelines are adhered to, it provides effective water repellency for years. Helps prevent damage caused by freezing and thawing. Suitable for use on brick, concrete and stone. For exterior use only. Specifications: Size: 1L.

This Thompson's Emergency Instant Repair spray is a specially formulated, sprayable mastic that immediately seals and repairs water leaks on a variety of roofing materials. Suitable for use in adverse weather conditions the formula displaces moisture ensuring a watertight bond with virtually any roofing material. The unique thickening system immediately structures on contact ensuring gaps and cracks are filled and repaired giving instant protection against water ingress. Developed to flex with the natural movement of the substrate Thompson's Emergency Instant Repair resists cracking and splitting ensuring protection against future leaks. Suitable for use on leaking roofs, guttering, pipes and drains and on caravans, garden sheds and greenhouses. Suitable for use on tile, slate, metal, asphalt, felt, wood and plastic.Size: 450gColour: Black

This Thompson's TDSB5L Drive Seal is a high-performance acrylic coating specifically designed to enhance the appearance of tarmac drives and obliterate existing stains. Its quick drying formulation means that the drive can be back in use in as little as 4 hours. Once dry Thompson's Drive Seal reaches its optimum performance after a few days and gives an attractive, low sheen, slip resistant finish which provides unrivalled protection from weather damage and prevents oil and petrol spills leaving unsightly stains on the surface. For maximum performance ensure all surfaces are clean and free from any dust or loose material that may interfere with the adhesion of Thompson's Drive Seal. Remove dirt, moss, lichen, dust or loose material by brushing with a stiff bristle brush. Use Thompson's Oil Drive Cleaner to remove existing oil/grease deposits and to clean driveways prior to application. Thompson's Drive Seal can be applied by long pile roller to damp, but not saturated surfaces. Using a roller tray, load the roller fully and apply in an even coat ensuring all irregularities are covered. 6m/L per coat depending on the porosity of the substrate.Size: 5 litres.Colour Black.Slip ResistantDrive over in 4 Hours

Everbuild 402 Water Seal is a high-performance, transparent water repellent, specially formulated to prevent water penetration on all mineral substrates such as brick, stone, concrete, pebbledash and rendering. Based on the latest technology silicone resins, Water Seal does not contain solvents harmful to the user or the environment and is non-flammable. Water Seal penetrates deeply into the treated surface to provide effective water repellence for many years; is unaffected by ultraviolet light and offers improved water beading compared with traditional solvent based products. Benefits: Improved durability and beading effectSolvent free formula, environmentally friendlyNon-flammableMay be applied by conventional garden sprayMay be applied to damp surfaces Use as an effective water repellent on: brick, stone, render, concrete and pebbledash Size: 5L

Everbuild 408 Super Seal (formerly Exterior Wall Seal) is a high-performance, solvent based, transparent water-repellent, specially formulated to provide a water-repellent finish and prevent attack by water penetration on porous substrates such as brick, stone, concrete, plaster, plasterboard, pebbledash, rendering, porous tiling, grouting etc. Super Seal penetrates deep into the treated area and actually chemically bonds to the surface, providing effective water repellency for many years. It is unaffected by ultraviolet light and offers improved water beading when compared to other traditional solvent based products.

1 x Everbuild Survey Line Marker Spray White 700ml.

1 x Everbuild Survey Line Marker Spray Red 700ml.

1 x Everbuild Survey Line Marker Spray Orange 700ml.

1 x Everbuild Survey Line Marker Spray Green 700ml.

1 x Everbuild Survey Line Marker Spray Blue 700ml.

This EVERBUILD 206 Strike Release Oil is a high-quality chemical release agent to enable concrete shuttering to be removed easily, leaving the edge of the concrete structure clean and well formed.The 206 is a solvent, and mineral oil free emulsion based on biological degradable synthetic oil. This Release Oil is recommended for spray, brush or roller application to moulds manufactured from wood, metal, polypropylene, ABS, polyurethane, and other plastics susceptible to long term damage by conventional release agents.It produces a high-quality stain, and blemish free, concrete finish with minimum incidence of blowholes.The 206 can be used as a release agent for smooth non-absorbent formwork, absorbent formwork, heated formwork (up to 70C) and textured formwork.The oil has excellent sticking ability on vertical mould surfaces and protects formwork from steel corrosion, early ageing, gives easy, and precise separation of the formwork from the hardened concrete.The product is safe to handle, and there is no need to dilute.Specification: Size: 5L.

Everbuild 406 Stabilising Solution is a microscopically fine polymer emulsion which penetrates dusty/chalky and badly weathered surfaces to leave a stable sound base for decoration with paint, wallpaper, tiling etc. Suitable for both interior and exterior use over plaster, rendering, pebble-dash, stucco, existing painted surfaces, brickwork, blockwork etc.

Everbuild 503 SBR Bond 5 litre.

Everbuild 503 SBR Bond 2.5 litre.

The EVERBUILD 507 Rendagrip, of 10 litres is an extra-grip render bonding agent containing a fine aggregate to provide an improved key, before applying render on external surfaces e.g., concrete, lightweight blockwork, brick etc.The fine aggregates are suspended in a unique waterproof polymer to ensure easy application by roller, or brush, and an even spread of aggregate avoiding any weak spots in the key coat, or the aggregate particles coming loose during application.The 507 Rendagrip reduces the porosity/suction of the base substrate, providing a mechanical key from the fine aggregate suspended within the product.Rendagrip can be used as a bonding agent for render to concrete, brickwork, blockwork etc. and as a bonding agent to improve adhesion to smooth surfaces. After one coat application Rendagrip can render when dry, where the red colour indicates coverage, and can be applied to damp surfaces. Specifications: Colour: Red.Size: 10L.

Everbuild Opti-Mix Mortar Plasticiser is the worlds first 1:25 plasticiser is just Pure Admix, smells and works like the best traditional Admix. Benefits include: superior plasticising action, controlled dosage, consistent mix design, easy to use, no waste. 1 litre is equivalent to 25 litres of standard product. Tested to BSEN934-Part 3.

KOS Flue Cement is a high temperature (to 1,250C) ready mixed fireproof mortar paste, designed for the safe installation/jointing of Type A1 (BSEN1857) concrete flue liners (previously known as class 1) for use with domestic fires and stoves e.g. coal, wood-burning or gas (including flame effect). KOS FLUE CEMENT may also be used as a general-purpose fire cement in most applications where direct flame contact occurs.

Everbuild Integral Liquid Waterproofer is a liquid additive that provides long term water protection to mortar, concrete and rendering. It helps to reduces water permeability and is suitable for all applications where resistance to water absorption is necessary such as pool and tank linings, roof areas, external rendering and pointing and structures below ground level. Tested to BSEN934-Part 3. Areas of Use:- Waterproofing below ground; basements etc.- Waterproofing above ground; mortar, render, screeds etc.- Waterproofing the linings of water tanks/silage pits/ponds

EpoxySET 105 is a 3-part general purpose repair mortar based on epoxy technology. Formulated to withstand chemicals, impact and abrasion and can be used to repair concrete, screeds, stone, brick and steel in even the most demanding domestic and industrial situations. EpoxySET 105 is the ideal product for repairing floors, steps, kerbs and sills. Pack includes finishing solvent and gloves.

Everbuild Evermix 3-in-1 triple action admixture waterproofs, plasticises and retards to assist workability, reduce water penetration and allow larger areas to be covered in one application. Evermix 3-in-1 is particularly formulated for use in renders, dry dash and pebble-dashing, however it can also be used in any cement mixture where waterproofing and increased workability are required in conjunction with retarded setting. Tested to BS4887 1973.

Butyl Glazing Compound is specially formulated for glazing double glazed units into timber window frames where a timber bead is to be used. Suitable for both soft and hardwood frames.-Elastic formulation - moves with the frame.-Easier to apply than most competitive putties.-Extended shelf life-Added plasticiser improves adhesion and helps prevent cracking. -Suitable for use with laminated/heat absorbing glass.-Bedding insulated glass units-Glazing greenhouses (metal and timber)- Unsuitable for plastic frames, or frames treated with decorative. microporous stains

Everbuild Aquaseal Liquid Roof is an easy-to-use, all weather roofing system which is ideal for waterproofing any flat or pitched roofs. Aquaseal Liquid Roof creates a solid, waterproof membrane that covers the entire surface area without any seams. It is a ready-to-use, polyurethane-based product that can be applied cold. Aquaseal Liquid Roof is ideal for use on roof areas for new projects, extensions or to refurbish an existing, leaky roof. It offers excellent adhesion to both porous and non-porous substrates. Colour: Slate GreySize: 7kg

Everbuild 201 Mortar Admix is an air entraining plasticiser that replaces lime in the mix. Provides an easy to work, 'butter like' consistency to the mortar. It also prevents shrinkage, cracking and crazing during setting. For use in brick laying and plastering mortars. Helps to improve frost resistance and long term resistance to freeze-thaw cycles when set. Tested to BSEN934-Part 3. Areas of Use:- Load bearing brickwork- Block laying- External/Internal rendering- Pointing/repointing brickwork

Everbuild Black Jack 907 Solar Reflective Paint is a thin, bituminous-based, aluminium protective paint of brushable consistency which dries to a silvery finish. The product is specifically designed for application over primed metal walls and roofs to reduce heat absorption.

1 x Everbuild Survey Line Marker Spray Yellow 700ml.

Forgefix Dog Tooth Washers are mainly used with Carriage Bolts, where timber to timber connections are required. The teeth bite in to the timber, offering a no movement fastening.The washers are Zinc Plated for increased corrosion resistance. APPLICATIONUsed in many joints where restricted movement is required such as Roofing Joists, Newall posts on decking etc.Can be used with many types of bolts and fasteners, in particular Carriage Bolts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. Dog Tooth Washer ZP 50 x 12mm Box 100

The Everbuild STICK2 All-Purpose Superglue Tube is a high strength universal glue that can fill gaps up to 0.1mm. It can also bond non-porous surfaces such as plastics, metals, PVCu, rubber, ceramics and much more. The superglue is quick drying and forms an instant bond in just 1 minute. Size: 3g.

STICK2 All-Purpose Superglue fills gaps up to 0.1mm and is perfect where a fast set is required. Bonds non-porous surfaces such as plastics, metals. PVCu, rubber, ceramics and much more.

Everbuild STICK2 Superglue Gel is a thixotropic ethyl cyanoacrylate based adhesive for bonding most common materials. The high viscosity formula is ideal for non-drip, vertical, porous or small gap filling applications. Everbuild STICK2 Superglue Gel bonds most types of wood, plastics, metals, paper, porcelain, rubber, cardboard and leather. To de-bond use Everbuild Superglue Remover.

Bostik Superglue Non-Drip Gel forms a strong, long lasting bond with most materials including wood, ceramics, hard plastics, rubber, metals and leather in seconds. Its non-drip formula makes it ideal for porous and vertical surfaces. With a precision nozzle for ease of application.

Bostik Superglue Easy Flow liquid forms a strong, long lasting bond with most materials including wood, ceramics, hard plastics, rubber, metals and leather in seconds. Superglue Easy Flow comes in a bottle with a precision nozzle for controlled application.

Bostik Superglue Liquid forms an ultra strong, long lasting bond with most materials including wood, china, hard plastics, rubber, laminates and metals in seconds. Superglue Liquid comes in a convenient tube with a precision nozzle.

A general purpose spray adhesive suitable for indoor and outdoor applications. Easy to use and an ideal substitute for double sided tape. Ideal for fixing floorings, upholstery, fabric, foam, polythene, foils, loose lay materials, cardboard and many other materials.Not suitable for use on vinyl or for mounting photographs.Test before use on new applications or unfamiliar materials to confirm suitability before use. Each 500ml can cover an area of 60 sq ft approximately (medium setting). Non-chlorinated and CFC free.

Everbuild Smart Tack is an advanced spray bonding system that outperforms and outdates conventional contact adhesives, providing significant performance and time-saving application benefits. Supplied in a standard aerosol can for smaller jobs and tricky areas such as edging, mitred joints etc. Offers the benefits of the smart tack system with lower pressure application. Based on new technology resins, providing very fine strands of 'high solids' adhesive that forms a web type pattern on application. Can be used for a multitude of uses in the shopfitting, furniture manufacture, laminating, joinery and exhibition industries. Size: 500ml.

Bostik Fast Tak is a permanent spray adhesive in an aerosol can. Ideal for presentations, crafts and household repairs. Good for bonding a variety of materials including paper, card, foam, leather, rubber, hard plastics, metal, wood, hardboard, stone and even concrete.

Stick 2 CARPET FIX SPRAY is sprayable medium-duty glue which fixes P.U. and a foam backed carpets, carpet tiles, underlay, paper felt and cork to most common substrates. This product has the following advantages:Economical in use.Fast rate of tack development.Time saving- easier and quicker to apply than most trowel/spreader applied adhesives.Foaming formula-gives low soak into substrates.CFC free.Repositionable.

Everbuild STICK2 Hard Plastic Adhesive is a strong, clear, quick drying adhesive, suitable for bonding most hard plastics such as rigid PVC, acrylic, polycarbonate and ABS. Ideal for repairs to guttering, sills and bonding PVCu and ABS non-pressure pipework. Temperature resistant to 100C.

Bostik Hard Plastics glue is an ultra strong, quick drying clear adhesive. It is perfect for tough repairs on most hard and clear rigid plastics including PVC-U, ABS and High Polystyrene and other materials.

Bostik Soft Plastics glue is an ultra strong, quick drying, water resistant clear adhesive, perfect for making flexible repairs to things like inflatables and tents. It also contains a PVC repair patch.

Bondloc B3294 is a toughened structural adhesive formulated for bonding dissimilar substrates as well as unprepared metals, ceramics, wood, concrete and standard thermoset plastics. The final adhesive bond is designed to be load-bearing and resistant to weathering, humidity and wide temperature variations. Applications: Outdoor weathering or solvent exposure thermoformed plastic assemblies, PVC, fibreglass, vinyls, ABS, steel aluminium, stainless steel, acrylics, phenolic, polycarbonate, styrenics, Noryl, PET, wood, concrete and ceramic magnet and speaker assembly. Specifications: Viscosity: 55,000cpsColour: Off whiteWeight: 8.44 lbs/galMixed Density: 8.28lbs/galFlash Point: 51FMixed Viscosity: No sagging gelOpen Time: 3 minutes @ 72F, 22CAssembly Time: 6 minutes @ 72F, 22CFunctional Cure: 3/4-1 hourFull Cure: 4 hoursSolvents: NoneCoverage: (based on 25ml) 152 sq.in @ 0.010in

Bondloc B2001 is a hand kneadable, specialty epoxy putty that mixes for permanent repairs to many substrates. Contains fading black dye that becomes grey after mixing. May be applied under water (fresh or salt). Bonds to fibreglass, metal, wood, concrete and glass. Will not yellow to UV exposure. Hardens in 10 minutes, back in service in an hour, full strength in 24 hours. Can be used for repairing tanks and drums, patching holes in pipes, stopping leaks and repairing porosity holes in castings. Specification: Typical Properties: 7 days cured at 24CColour: Black, changes to grey after mixingViscosity: putty/hand kneadablePot Life @24C: 20 minutesComprehensive Strength: 83 N/mm2Adhesive Tensile Shear: 5 N/mm2Cured Hardness Shore: D 75Dielectric Strength: volts/mil 300Solids: 100%Temperature Resistance: Wet: 49C, Dry: 121CSize: 50g

Bondloc B572 White Pipe Seal is designed for the locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. The thixotropic nature reduces the migration of liquid product after application to the substrate. Has a good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol and Brake Fluid. B572 is unusual in that it does not fully cure until some 60 hours after application, allowing for re-alignment of elbows and joints. Replaces tapes and dopes, stops gas and fluid leaks on most metals and assists in lubricating during assembly. Will not shred or tear which would contaminate your system. Use it to seal against oils, gases, chemicals, water and steam etc. Specifications: Resin: Dimethacrylate.Colour: White paste.Cure speed with activator: Not recommended.Cure speed Without Activator: up to 60 hours.Viscosity Brookfield Sp3 @ 20rpm: 20,000cps.Gap fill / Max threadform: 0.4 mm / M36.Flash Point: >85C.Shelf Life: 36 months @ 20C. Specific Gravity: 1.25.Max Operating Temperature: -55C to 150C. Cured Performance: Full Cure Time: 60 hours.Typical breakaway strength: 6 N.m.Typical prevailing strength: 2 N.m. Size: 50ml.

Bondloc B577 Pipe Seal is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its Anaerobic cure system in contact with metals in the absence of air (oxygen). When fully cured it resists pressure up to 350 bar. B577 is not suitable for oxygen systems. Good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol, Acetone and Brake Fluid. Typical applications are in sealing of all types of threaded connections against water, oil, gases and most common materials conveyed by pipes. Specification: Resin: Dimethacrylate.Colour: Yellow.Cure Speed with Activator: <10 minutes.Cure Speed without Activator: <15 mins @ 20C.Viscosity: >50,000 cps.Gap Fill: 0.05mm to 0.4mm.Flash Point: >100C.Shelf Life: 12 months @ 20C.Specific Gravity: 1.09.Max. Operating Temperature:150C. Cured Performance: Full Cure Time: 6-12 hours.Typical Breakaway Strength: >6 to <15 N/mm (2).Prevailing Torque: >3 to < 9 N/mm (2).Static Shear Strength: >5 to <15 N/mm (2). Size: 50ml.

Unibond No More Nails is a high strength grab adhesive that eliminates the need for nails and screws in many DIY and repair jobs. It is safe and easy-to-use, adheres to most building materials and can be used to fill minor gaps on uneven surfaces. No More Nails is ideal for fixing skirting boards, dado rails, architraves, coving, polystyrene mouldings, decorative wall panels, plasterboard, carpet and carpet grippers and worktops. Dries translucent.1 x Unibond No More Nails Invisible Cartridge 285g

Unibond No More Nails Exterior is a high strength adhesive that eliminates the need for nails and screws in many DIY and repair jobs. It provides one of the strongest initial grabs available from Unibond, for un-paralleled support for heavier objects. It is extremely versatile and adheres to most building materials. Dries white. Suitable for exterior use.

Colour: Natural

Colour: Grey.

1 x Everbuild Stixall Extreme Power Easi Squeeze White 80ml

1 x Everbuild Stixall Extreme Power Easi Squeeze Crystal Clear 80ml

Colour: Clear.

Colour: Brown.

Colour: Black.

Pinkgrip Dry Fix is a revolutionary new type of fast curing, adhesive foam that has been specially developed for the rapid installation of Plasterboard, Insulation Boards and other sheet materials such as Roof Decking and Floorboards. Pinkgrip Dry Fix provides significant labour saving and convenience benefits when compared to traditional dry wall adhesives. It will bond to most common building substrates; can be applied horizontally or vertically to boards, walls or battens/beams. The foam expands very minimally on application but enough to fill any gaps on uneven surfaces. Pinkgrip Dry Fix can be applied using an Everbuild Dry Fix Applicator Gun.

Everbuild Gun A Nail Standard is a high strength, gap filling multipurpose building adhesive based on a tackified solvent free system for use in a wide variety of building and home improvement applications. Gun A Nail Standard can be used where at least one of the substrates to be bonded is porous. BENEFITS- Solvent-free - environmentally friendly formulation- Excellent adhesion/bond strength - adheres to most common surfaces.- Exceptional early grab properties - usable in both vertical and horizontal positions. - High solids formulation - excellent gap filling properties without shrinkage.- Extended open time - allows for easy repositioning after fixing- Will adhere to damp surfaces.- Water clean up - no hazardous solvents. AREAS FOR USE- Bonding dado rails, architraves and skirting- Fixing wall cladding direct to internal wall surfaces or timber battens- Fixing battens directly onto walls without fastenings- Bonding carpet gripper systems to most floors without the need for nails or tacks- Bonding stair nosing to concrete or wooden stairs- Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans.

Colour: White.

Pinkgrip is a revolutionary direct bond adhesive specifically formulated for the professional user, using polymers at the leading edge of adhesive technology. Pinkgrip will stick just about anything on a building site that needs sticking. Its amazing grabbing strength not only removes the need to pin under the work piece to prevent slumping, but its revolutionary initial Direct Bond eliminates the need for double stick methods. Pinkgrip can be used inside and outside and adheres to just about every building substrate, providing the following key benefits: - Enhanced slump resistance for quick and simple direct bonding to most substrates without the use of temporary supports in most applications. - Excellent early and ultimate adhesive strength on porous substrates. - Excellent gap filling properties to accommodate uneven surfaces. - Good nip off qualities to prevent messy stringing of the adhesive Size: 350ml cartridge.

Bostik DIY Hot Melt Glue Sticks can be used with the DIY Hot Melt Glue Gun for an ultra-strong, long-lasting bond in seconds on a wide range of materials, and are easy to insert. Specification Length/Diameter: 100 x 12mm

Bostik Handy Glue Sticks can be used with the Handy Hot Melt Glue Gun for an ultra-strong, long-lasting bond in seconds on a wide range of materials, and are easy to insert. Specification Length/Diameter: 102 x 7mm