SPECIFICATIONS
Torque range 30 – 360Nm, 265 -3186 lb-in, 22.12 - 265.5 lb-ft or 3.05 - 36.7 kg-m
Large LCD digital display shows selectable units Nm, lb-in, lb-ft or kg-m
Target torque value preset & audible alarm
Low battery indicator
Calibrated to BS EN ISO6789
Weight 0.3kg

Features:
• 6 drawers (588x367 mm) with ball bearing slides
• Drawer bases protected by foamed rubber mats
• Front centralized lock
• With vertically adjustable feet
• Each drawer can accommodate up to 4 EVA foam or ABS thermoformed trays
 65,5 kg

38 PIECE SET: 38 pieces of tools, accessories, and hardware

TACKLE A VARIETY OF EVERYDAY TASKS: Around the home and on the jobsite from measuring, to cutting and screwdriving

VERSATILITY: 3m/10ft measuring tape, 7oz hammer, combination pliers for general purpose gripping, Long-nose pliers for intricate bending, re-positioning and wire cutting, 16 Allen keys in various sizes, a torpedo spirit level for everyday levelling applications, and a basic assortment of hardware accessories including pins, picture hooks, wire and more

Lightweight and portable design
Turbo fan cooling for greater efficiency
Adjustable power and speed dials for accurate welding control
Supplied with 2 Extra 0.9mm tips and 1x hammer/brush
CONFORMS TO BS EN 60974
Product Weight: 5.85kg
Thermal overload protection

SPECIFICATIONS
Welding capacity on mild steel 1mm + 1mm
Input power supply 230V, 50hz
Max. absorbed power 6kW
Synchronous electronic timer - spot welding time adjustable from 0.1 to 1.2 seconds
Arm pressure adjustable from 40kg to 120kg (with 120mm long arm)
A standard 13 Amp plug MUST NOT be used with this machine. Connect the mains lead, through a suitably fused isolator switch, to a 230 Volt (50Hz) electrical supply.

Product description
This portable resistance welding machine, featuring electronic spot welding time control, is suitable for many spot welding applications including vehicle body repairs, general metal fabrication and light industrial use. Robust and simple to operate, the CSW6T delivers consistent results every time enabling the fast and efficient fusion of metal sheet.

Technical specification
Max. Welding Thickness (mm)
1+1
Input Voltage
230V
Rated Power
1.2kW
Power Supply
Requires Hard Wiring
Max. Absorbed Power
6kW
Dimensions
440x110x185mm
Packaged Weight
10.68kg

WD-40 Multi-Use Product protects metal from rust and corrosion, penetrates stuck parts, displaces moisture and lubricates almost anything. WD-40 Multi-Use Product 5-Gallon Pail is best used for heavy duty industrial jobs uses that require repeated treatment.

Whether in the factory, food processing facility, jobsite or auto shop, WD-40 Specialist® Degreaser & Cleaner EZ-Pods let you customize your degreasing power for almost any challenge.

Perfect for greasy wheels, gears, floors, and surfaces, including concrete and stainless steel. 

Use Degreaser & Cleaner EZ-Pods to remove stubborn build-up in industrial, commercial, and residential kitchens. Safe to use on stovetops, microwaves, backsplashes and more to get rid of tough grease and grime.   

Portable and easy to store, EZ-Pods are great for toolboxes, carts, and other small storage areas.

Use in spray bottles, buckets, and power washers.

EZ-Pods work in any temperature water but dissolve best in warm water.

WD-40 Specialist Degreaser and Cleaner EZ-Pods are the Winner of “Best Cleaner” in the 2023 Popular Mechanics Yard and Garden Awards in the Patio category.

CUSTOMIZABLE:

WD-40 Specialist® Degreaser and Cleaner EZ-PODS are the newest, easiest way to customize cleaning strength to your needs - from sensitive surfaces to the toughest mess. For everyday degreasing jobs, simply drop one EZ-POD in 32 ounces of water in the container of your choice or add a second for even stronger degreasing power.

FAST AND EASY:

EZ-PODS dissolve in minutes in any temperature water.

VERSATILE:

Use on automotive parts, shop floors, industrial machinery, commercial appliances, even food processing equipment and facilities, for a variety of degreasing needs. They’re also safe to use on sensitive surfaces like plastics, rubber, neoprene, stainless steel, carbon fiber, copper, aluminum, chrome, and painted areas.

PORTABLE:

Perfect for on-the-go, EZ-PODS solve nearly all your degreasing needs from one convenient pouch. They’re compact, durable, and ready to mix and go.

RESPONSIBLE:

EZ-PODS have no harmful fumes, are non-abrasive, non-corrosive, leave no residue and don’t require CA-Prop 65 warning. They are 50-state VOC compliant and come in recyclable packaging.

WD-40 Specialist Degreaser and Cleaner EZ-Pods are the Winner of “Best Cleaner” in the 2023 Popular Mechanics Yard and Garden Awards in the Patio category.

900KG MAXIMUM CAPACITY: When used as a pair can safely hold up to 900kg.FOLDING DESIGN: For convenient storage and transportation.
ALUMINUM LEGS: For strength, stability, and durability.

Product Overview
The STANLEY® FATMAX® Folding Metal Sawhorse (Pair) provides a quick and convenient makeshift workbench for cutting materials, or a convenient flat surface to work from, with sturdy metal legs for loads up to 900kg. This strong and stable sawhorse can be folded in seconds for convenient storage and transportation to and from the jobsite.

Additional Features
ANTI-SLIP RUBBER FEET: Designed to improve grip.
CAN BE LOCKED TOGETHER: And carried with integral carry-handles.
INTEGRAL GROVE: Securely holds timbers, pipes and other materials.
CREATES A MAKESHIFT WORKBENCH: Quickly and conveniently create a makeshift workbench for cutting materials, or just a convenient flat surface to work from.

Specifications
Weight Capacity [Metric]
900 Kg
Product Width [Metric]
111.7 cm
Open Width [Metric]
1117 mm
Work Facilitation Product Type
Sawhorses
CE Mark
No
Product Weight [Metric]
11 Kg
Product Height [Metric]
828 mm
Loading Capacity [Metric]
900 Kg
Product Weight Gross [Metric]
11 Kg
Leg Material
Metal - Steel
Number of Pieces
2
Open Depth [Metric]
430 mm
Product Length [Metric]
1117 cm
Connectivity
Yes - Two Connect Together for Transport/Storage
Is it a Set
Yes
Packaging
Carton
Worktop Material
Metal - Steel

ADJUSTABLE SHADE CONTROL - Benefit from precise visual clarity and optimal protection as you weld, thanks to the seamlessly adjustable shade control ranging between 9-13. Shade control allows suitability for MIG, TIG, arc/MMA and gas welding. Also features sensitivity and delay controls for switching light to dark.
ADJUSTABLE SENSITIVITY & DELAY - Helmet has built-in sensitivity and delay switches to adjust to your needs.
FULLY AUTOMATIC - Fully automatic switching from light to dark on striking arc. Eyes remain firmly protected with an instant operating time between light & dark standing at 0.3ms. Shade is selected by a rotary knob on side of helmet.
SOLAR PANELLED POWER SUPPLY – Welding helmet has a solar panelled power supply to help it last longer. Rechargeable lithium batteries also supplied.
COMPLIANT WITH BS & DIN STANDARDS – Helmet complies with BS EN 379, BS EN 175 and DIN standards.

Grinding Function:
Yes

Nett Weight:
0.495kg

Operating Temperature:
-10°C to +60°C

Operating Time Light/Dark:
0.1ms

Power:
Lithium Cell Battery

Shade Active:
9-13 Variable

Shade Inactive:
4

Viewing Area:
100 x 41mm

Low noise level (62dB) equivalent to a conversation
8 Bar (116psi) maximum working pressure
1100W, 230V direct drive motor with thermal overload protection
50-litre air receiver
7.0cfm (200L/min) air displacement from 1.5HP motor
Oil free
Twin Outlets (1/4" BSP male thread connector)
Adjustable airflow regulator
Automatic On/Off pressure switch

STANLEY® FATMAX® Heavy-Duty Trade Knife (Black) from trusted STANLEY® FATMAX® brand, designed for heavy-duty cutting jobs
VERSATILE AND HEAVY-DUTY FOR CARPET FITTING AND MORE: Suitable for tough professional cutting applications such as carpet, flooring, drywall and more
HARDENED STEEL BLADE HOLDER: Withstands intensive daily use and will not wear
Product Overview
The STANLEY® FATMAX® Heavy-Duty Trade Knife - Black is designed to meet the needs of flooring professionals and other contractors completing the most demanding cutting jobs. Manufactured for ultimate durability, it is engineered for exceptional cut accuracy, with a hardened steel blade holder and specially-designed nose that ensure snag-free cutting and minimum blade wobble or movement. This helps improve cut speed and reduce wasted material. The blade holder will not wear even in intensive daily use. Featuring optimised ergonomics in a linear form factor, the Heavy-Duty Trade Knife delivers maximum blade contact on materials. The extra grip zone recess at the front provides outstanding precision, while the enhanced handle grip and tail flare improve control when making longer cuts. The quick-release thumb wheel and pin-hinged housing allow for fast and precise blade change, while the magnetic nose conveniently holds the blade in place during replacement. For extra accessibility and productivity, 10 blades can be stored on board each knife, for a full day of cutting. Each knife is supplied with a protective holster for added safety and easy transportation. Available in black and silver models for application-specific tasks, and as a twin pack containing both.
Additional Features
QUICK-RELEASE THUMB WHEEL: Course-threaded, quick-release thumb wheel allows fast, simple blade changes
INTEGRAL BLADE STORAGE: Onboard storage for 10 blades with magnetic blade retention, suitable for a full day of cutting
OPTIMISED LINEAR DESIGN: For strong, clean cuts in extended applications and maximum blade contact on materials
ERGONOMIC DESIGN: Innovative pin-hinged body for easy blade access
PROTECTIVE HOLDER INCLUDED: For safe transportation and storage
MAGNETIC NOSE: Holds the blade firmly in place during replacement
REDESIGNED NOSE: Delivers outstanding cut accuracy and ensures minimal blade wobble
MAXIMUM CONTROL: Grip zones and flare on knife tail for maximum control when making longer cuts
BLADES INCLUDED: Supplied with 2 x STANLEY® FATMAX® Induction Hardened Blades and a STANLEY® 1996 Large Hook Blade. Compatible with STANLEY® FATMAX® Carbide Utility Blades
BLACK, SILVER OR MIXED CDU: Available in black (FMHT10500-0), silver (FMHT10501-0) or a Mixed CDU (FMHT10502-9) containing both models
Includes
(1) STANLEY® FATMAX® Heavy Duty Trade Knife
(2) STANLEY® FATMAX® Induction Hardened Steel Blades and 1 x 1996 Large Hook Blades
Specifications
Product Width [Metric]
25 mm
Product Height [Metric]
12 mm
Product Weight Gross [Metric]
0 Kg
Product Length [Metric]
165 mm

GET MORE DONE – SOLO: Ideal for jobs where one person isn't quite enough, with heavy-duty performance delivering up to 150kg lifting force with up to 220mm lifting capacity
MULTIPLE TRADE APPLICATIONS: Lifts, levels, holds and spreads easily and safely for multiple applications across kitchen, floor, door and window fitting, carpentry, joinery, drywall and general construction work
FOOT OPERATION FOR EASY HANDS-FREE LIFTING: Safe and easy to use, reducing the risk of injury and accidents when levelling and holding heavy or awkward items such as sheet materials, doors and large appliances
Product Overview
The STANLEY® FATMAX® TradeLift™ is a versatile handheld tool for lifting, levelling, holding and spreading of heavy or awkward objects such as appliances, sheet materials or furniture – a real life saver when you're working alone. Engineered for safety, this professional, heavy-duty tool enables easy hands-free lifting up to 150kg, to a maximum height of 220mm. The TradeLift™ is perfect for jobs like hanging doors, installing kitchen cabinets and appliances and fitting windows in all environments, with enclosed metal plate housing to enhance durability and prevent dust entering the tool. The robust lifting tool can be operated by hand or foot, with an ergonomic overmoulded handle providing extra grip, comfort, and control. A fine adjuster lowers the load by up to 2.5mm per toggle for precision levelling and spacing, with a full release button safely recessed to avoid accidental activation. The large base plate with angled edge slides easily under low objects and reduces the risk of tipping, with four screwholes countersunk into the base to anchor the lift for maximum stability. Available to purchase as a single tool (FMHT83550-1) or as a twin-pack (FMHT83552-1).

Additional Features
ENABLES ONE-PERSON WORKING in professional applicationsHEAVY-DUTY PERFORMANCE: Up to 150kg lifting forceDESIGNED FOR MULTIPLE TRADES AND USES: Ideal for kitchen, floor, door and window fitting, carpentry, joinery, drywall and general buildingREINFORCED PUSH DOWN LEVER: Allows the user to apply pressure to the handle for easier lifting of heavy items such as appliancesHANDS-FREE OPERATION: The reinforced push down lever can be used by foot for hands free operationRECESSED FULL RELEASE BUTTON: Safety feature avoids accidental activation of the full releaseFINE ADJUSTER: Lowers the lift plate by up to 2.5mm per toggle for fine adjustments when levellingANGLED EDGE: Allows the tool to slide under low objectsSTABLE OPERATION: Four countersunk screw holes ensure the tool can be anchored securelyLARGE BASE PLATE: For further stability, and to help prevent tippingENCLOSED METAL PLATE HOUSING: Provides added durability and prevents dust from contaminating the toolERGONOMIC HANDLE: Handle overmould delivers grip, comfort, and controlLIFTING CAPACITY: 7-220mmBASE DIMENSIONS: 6 x 170 x 125mmTWO PACK OPTIONS: Single (FMHT83550-1) or twin-pack (FMHT83552-1)

Includes
(1) STANLEY FATMAX TradeLift
Specifications
Bar Material
Steel
Product Width [Metric]
125 mm
CE Mark
Yes
Spreading Function
Yes
Product Weight [Metric]
2.7 Kg
Product Height [Metric]
450 mm
Bar Length [Metric]
450 mm
Bar Thickness [Metric]
8 mm
Distance Between Centers of Fixing Holes [Metric]
90, 140 mm
Handle Material
Soft grip
Number of Pieces
1
Product Length [Metric]
240 mm
Spreading Capacity [Metric]
220 mm
Is it a Set
No
Packaging
Box

DEWALT 100 YEAR LIMITED EDITION HAMMER DRILL DRIVERBRUSHLESS MOTOR: Delivers high performance, extends tool life and allows for a much shorter design
15-POSITION ADJUSTABLE TORQUE CONTROL: For consistent screwdriving into a variety of materials
Product Overview
The Limited Edition DCD100 has been engineered to celebrate 100 years of DEWALT and our relentless pursuit of the cordless jobsite.\nThis brushless drill is our most compact 18V XR Hammer Drill Driver that delivers up to 68Nm of torque in a compact 164mm body, designed to give you the performance you need on the toughest jobsites. 2 speed and 15 torque settings give you the ultimate control over your drilling and fastening applications. A bright LED positioned on the foot offers greater visibility in dark and confined spaces.
Read more
Additional Features
BRIGHT LED ON TOOL FOOT: For high visibility in low light situations
ULTRA COMPACT, LIGHTWEIGHT DESIGN: Allows use in confined spaces
TWO SPEED ALL METAL TRANSMISSION: For increased runtime and longer tool life18V XR RANGE: Part of the 18V XR system of over 250 tools
Includes
(1) DCD100 18V XR Brushless Hammer Drill Driver
(2) 5.0 Ah XR Lithium Ion Battery Pack With State of Charge Indicator
(1) Multi-Voltage XR Charger
(1) TSTAK Heavy Duty Kitbox
Specifications
Battery Voltage
18 V
No Load Speed (BPM)
0-7,650/0-28,050
Chuck Capacity [Metric]
1.5-13 mm
Max. Drilling Capacity (Masonry) [Metric]
13 mm
Battery Capacity
5 Ah
No Load Speed (RPM)
0-450/0-1,650
Product Weight [Metric]
1.09 Kg
Battery Included
Yes
Number of Speed Settings
2
Led light
Yes
Max Torque [Metric]
68 Nm
Power Output
420 W
Max. Drilling Capacity (Metal) [Metric]
13 mm
Power Source
Cordless
Beats per Minute
0-7,650/0-28,050
Product Length [Metric]
164 mm
Max. Drilling Capacity (Wood) [Metric]
30 mm

Withstand-Rough Conditions - Help Protect Valuables With An IP54 Water-Resistant Compartment And Waterproof Base
Constructed With Durable Materials - Take On Tough Jobsites With Durable 1680 Denier Fabric And Dirt-Repellant Tarpaulin.
Optimize Organization - Organize Tools With 43 Pockets, Including A Separate Compartment For Your Drill And Batteries.
Our Limited Edition DEWALT x McLaren F1 Team tool range is the result of a shared drive to be tough under pressure. We are Tough Together. A tough and versatile backpack perfect for storing and moving your tools and accessories in fast paced, high pressure evironments.
Additional Features
Laptop Protection – Help Prevent Damage To Electronic Devices On Tough Jobsites With Separate Laptop Compartment.
Oversized Tool Storage – Keep Items In Order With A Designated Bottle Pocket And A Unique Section For Long Tools.
Convenient Tool Access – Access Tools Quickly On The Job With The Fold-Down Main Pocket.
Hi-Vis Design: Maintain The Visibility Of Your Tools With Yellow Hi-Vis Internal Fabric.
Quick-Close Zipper – Store And Retrieve Tools Quickly, Even While Wearing Gloves, With The Ergonomic U-Shaped Zipper Pull.
Designed For Comfort – Stay Comfortable When Transporting Tools With A Padded, Ergonomic Back Support System.
Additional Storage – Find Essentials Fast With A Dedicated Tape Clip, Metal Carabiner, And Daisy Chain.
Maximum Load capacity: 25 kg.
Maximum volume: 28.7 Litres.
Dimensions: 35 x 24 x 54cm.
Includes
(1) McLaren 20 in. Tool Bag

Withstand-Rough Conditions - Help Protect Valuables With An IP54 Water-Resistant Compartment And Waterproof Base
Constructed With Durable Materials - Take On Tough Jobsites With Durable 1680 Denier Fabric And Dirt-Repellant Tarpaulin.
Optimize Organization - Organize Tools With 43 Pockets, Including A Separate Compartment For Your Drill And Batteries.
Product Overview
Our Limited Edition DEWALT x McLaren F1 Team tool range is the result of a shared drive to be tough under pressure. We are Tough Together. A tough and versatile backpack perfect for storing and moving your tools and accessories in fast paced, high pressure environments.
Additional Features
Laptop Protection – Help Prevent Damage To Electronic Devices On Tough Jobsites With Separate Laptop Compartment.
Oversized Tool Storage – Keep Items In Order With A Designated Bottle Pocket And A Unique Section For Long Tools.
Convenient Tool Access – Access Tools Quickly On The Job With The Fold-Down Main Pocket.
Hi-Vis Design: Maintain The Visibility Of Your Tools With Yellow Hi-Vis Internal Fabric.
Quick-Close Zipper – Store And Retrieve Tools Quickly, Even While Wearing Gloves, With The Ergonomic U-Shaped Zipper Pull.
Designed For Comfort – Stay Comfortable When Transporting Tools With A Padded, Ergonomic Back Support System.
Additional Storage – Find Essentials Fast With A Dedicated Tape Clip, Metal Carabiner, And Daisy Chain.
Maximum Load capacity: 25 kg.
Maximum volume: 28.7 Litres.
Dimensions: 35 x 24 x 54cm.
Includes
(1) McLaren Backpack With Handle and Wheels

TOUGHCASE+ STACKABLE CASE: Versatile, customisable and connectable accessory set system. Cases lock together.
MODULAR DESIGN: Connectable case allows multiple sets to be stacked and locked together.\nConnects to the small, medium, and large tough cases, and fits inside the TSTAK Caddy.
TSTAK COMPATIBLE: To hold all your accessory sets in one place. \n(Connects via the TSTAK Caddy and the large tough case)
Additional Features
CLEAR LID: Quick and easy bit selection.
INNER DOVETAIL SYSTEM: Bit bars and accessories can be moved around and customised to your preference.
QUICK & EASY BIT REMOVAL / RETENTION: For user convenience.\nBits lock into place to prevent them falling out when not in use.
FLEXTORQ SCREWDRIVER BITS: Impact ready for increased resistance to wear and shock in applications with high torque demands.
TORSION ZONE: Contoured area of the bit flexes with the torque of the impact driver to absorb torque peaks and protect the bit for longer life.
PRECISION MACHINED TIP GEOMETRY: Full fitment in the fastener, reduced cam-out, and longer life.
FULL FIT HEAD: Eliminates wobble and screw head rounding.
LASER ETCHED SIZE ID: Clearly visible bit type and size for quick and easy bit selection.
DEWALT BRANDED ID: High visibility.
IMPACT READY DRIVE GUIDE: With an extending sleeve for improved fastener stability and control.
Includes
(1) PH2 25mm
(1) PZ1 25mm
(2) PZ2 25mm
(1) PZ3 25mm
(1) T20 25mm
(1) T25 25mm
(1) PH1 57mm
(2) PH2 57mm
(1) PH3 57mm
(1) PZ1 57mm
(7) PZ2 25mm
(4) PZ3 25mm
(2) T20 57mm
(2) T25 25mm
(1) Impact Ready Drive Guide
Specifications
Product Width [Metric]
5 cm
Product Height [Metric]
12 cm
Product Length [Metric]
15 cm

POWERFUL PERFORMANCE AND RUNTIME - Tackle tough tasks with 554Wh capacity for the power and runtime for previously petrol powered applications.
POUCH CELLS - Give high power, low impedance with cool operation.4-LED STATE-OF-CHARGE INDICATOR - Keep track of battery charge status with the 4-LED indicator.
TAKE CONTROL with DEWALT POWERSHIFT. The Cordless Equipment System engineered for epic performance and runtime. Don’t wait to start, stop to refuel, or be limited by petrol a second longer. The high efficiency cells deliver higher power, cooler operating temperatures and longer runtime. A Glass Filled Nylon housing, water and dust resistance and 2 Year Guarantee deliver the durability you need.
Additional Features
GLASS FILLED NYLON HOUSING - For strength and durability.
CAREFULLY DESIGNED HOUSING - Water and Dust resistant.
TPE OVERMOULDED HANDLE - For easy carrying
HIGH VISIBILITY REFLECTIVE ZONES - For Jobsite Awareness.

POWERFUL CHARGING - 550W of efficient power.
FAST CHARGE TIMES - Charges DCPBS0554 to 100% in under an hour.
TWO-STAGE CHARGING - for speed and thermal management.
The high performance dedicated DEWALT POWERSHIFT charger will charge a DEWALT POWERSHIFT 554WH Battery in under 60 minutes. The LED indicators show 80% & 100% charge status. A built in roll cage with carry handles add durability and it can be used and mounted horizontally and vertically as well as mounted to Tough System 2.0 for portability on the jobsite.
Additional Features
DUAL LED CHARGE INDICATION - For 80% and 100% of charge.
PROTECTIVE ROLL-CAGE - for versatile carry orientation for maximum portability.
BATTERY LOCK - For security when transporting.
EFFORTLESS ORGANISATION - Integrated cable management system.
SEAMLESS INTEGRATION - Tough System 2.0 compatibility.
CONVENIENT STORAGE SOLUTION - Wall mountable base.
Includes
(1) POWERSHIFT™ 550W Charger

Optimize tool accessibility on the job with the DEWALT® Professional Nail Pouch. Featuring durable construction and 13 separate pockets, this storage solution helps protect your tools and keeps necessities close at hand in rough conditions.
Additional Features
ADDITIONAL STORAGE: Keep essentials close at hand with a soft hammer loop, a tape measure pocket, and tape clip.EASY-CARRY HANDLE: Move your tools around the jobsite with ease using the sturdy carrying handle.HI-VIS DESIGN: Get clear visibility of tools with yellow hi-vis internal fabric.REINFORCED STRENGTH AT STRESS POINTS – Stand up to harsh conditions with double stitching and reinforced rivets for additional strength where it’s needed most.QUICK ACCESS – Reach items inside fast with wide-open, structured pockets.
Includes
(1) Durable Webbing Belt
Specifications
Weight Capacity [Metric]
10 Kg
Product Width [Metric]
11 cm
Number of Pockets
13
Pockets
Yes
Product Height [Metric]
40 cm
Product Weight [Metric]
0.72 Kg
Hammer Holder
Yes
Integrated Tool Holders/Belt
Belt
Wearables Product Type
Single Pouch
Loops
Yes
Number of Pieces
2
Product Weight Gross [Metric]
0.83 Kg
Is it a Set
No
Packaging
Swing Tag
Product Length [Metric]
132 cm
Tape Holder
Yes

Part of the SV20 Series designed for the professional, offering heavy-duty, high performance, durable tools with lightweight composite designs for superior control and comfort.
Sprayer does not require manual pressing which makes it easy and practical to use.
Supplied with three different nozzles to meet different needs and an auto-cut-off function.
Suitable for sterilization, disinfection, weed killing, watering flowers and spraying water.
Strong durable back straps to ensure comfort when worn.
15L Fluid tank with lance holder clip.
Spraying lance including hose is 1.96m.
Package includes:

Model No. - Description

CP20VGBS - SV20 Series 15L Cordless Garden Backpack Sprayer 20V
CP20VBP2 - SV20 Series Power Tool Battery 20V 2Ah
CP20VMC - SV20 Series Fast Charge Battery Charger 20V
CP1200CB - Canvas Tool Storage Bag
You may also refer to the individual Model No. for full specification.

LARGE COVERAGE - The Ø3m overhanging corner parasol provides great shade for your garden or patio. Perfect to shade all sorts of outdoor settings from your Hot Tub or pool to your garden dining set.
EASY-TO-USE - The Crank handle makes the set-up of this banana parasol seamless and effortless. The collapsable design allows the hanging cantilever parasol to fold for easy storage.
DURABLE MATERIALS - Constructed from rust-resistant, powder coated Ø5.8cm durable steel poles, the cantilever parasol frame is designed with British weather in mind.
HEAVY-DUTY CANOPY - The parasol umbrella features a heavy duty 220g polyester canopy and is supported by eight strong steel ribs ensuring stability and shape at all times.
BASE INCLUDED - Supplied with 4 x quadrant bases which are fillable with either water or sand up to 92L and a cover to protect the parasol canopy when not in use.

ROBUST – Durable, lightweight tubular steel design perfect for keeping longer water hoses neat and tidy.
LARGE CAPACITY - Can hold up to 120m of Ø13mm standard water hose or 50m of Ø19mm H/D hose.
EASY TO MANOEUVRE - Fitted with easy-rolling 10" puncture proof PU wheels and solid axle for rough terrain.
LEADER HOSE - Supplied with 1.8m leader hose with 3/4"BSP brass fittings.
HOT AND COLD WATER HOSE INCLUDED - 30m High flow Ø19mm hexagonal hose can handle hot water up to 90°C and has a high pressure rating of 500psi, ideal for livestock and farming applications.
ANTI-KINK - Octagonal shaped hose helps reduce kinking and increase abrasion resistance.

Hose Size (ID):
Ø19mm

Length:
30m

Nett Weight:
29.9kg

GEARED MECHANISM FOR MAXIMUM POWER – Make light work of tough branches with enhanced cutting efficiency and reduced effort.
PREMIUM 5MM CARBON STEEL TEFLON-COATED BLADE – Ensures smooth, precise cuts while resisting friction, rust, and wear.
ALUMINIUM DIE-CAST ANVIL AND CHROME-PLATED LOWER BLADE – Built for durability, delivering long-lasting performance even in heavy-duty tasks.
TELESCOPIC POWDER-COATED STEEL HANDLES – Extendable design provides extra reach and leverage, ideal for high or hard-to-reach branches, with an ABS lock for safety.
ERGONOMIC PP 15% FIBRE AND TPR GRIP – Non-slip, comfortable handles offer maximum control and reduce hand fatigue during prolonged use.

Blade Length:
185mm

Blade Width(s):
5mm

Colour:
Black/Green

Handle Length:
500mm

Nett Weight:
1.78kg

Product Width (Side to Side):
220mm

SMOOTH AND PRECISE CUTS – 4mm Carbon steel Teflon-coated cutting blade ensures sharp, rust-resistant performance for effortless hedge trimming.
DURABLE CHROME-PLATED LOWER BLADE – Made from 4mm carbon steel, delivering reliable strength and long-lasting cutting capability.
POWDER-COATED STEEL HANDLES – Adjustable length for extended reach and improved leverage, perfect for high or dense hedges.
ERGONOMIC PP 15% FIBRE HANDLES WITH TPR GRIP – Comfortable, non-slip grip reduces hand fatigue for efficient and prolonged gardening sessions.
SECURE ABS TELESCOPIC LOCK – Ensures the handles stay firmly in place, providing safety and stability during use and easy storage afterward.

Blade Length:
330mm

Blade Width(s):
4mm

Colour:
Black/Green

Handle Length:
345mm

Nett Weight:
1.49kg

Product Width (Side to Side):
230mm

GEARED FOR MAXIMUM CUTTING POWER – Tackle tough branches effortlessly with a geared mechanism that boosts cutting efficiency.
HIGH-QUALITY 5MM CARBON STEEL TEFLON-COATED BLADE – Delivers smooth, clean cuts while reducing friction and resisting rust.
DURABLE 5MM CHROME-PLATED LOWER BLADE – Built to withstand heavy use, ensuring long-lasting performance and reliability.
CUTS BRANCHES UP TO 45MM – Perfect for pruning thick branches and shrubs with precision and ease.
ERGONOMIC POWDER-COATED STEEL HANDLE – Featuring a PP 15% fibre and TPR grip for a comfortable, slip-resistant hold during extended tasks.

Blade Length:
185mm

Blade Width(s):
5mm

Colour:
Black/Green

Handle Length:
570mm

Nett Weight:
1.48kg

Product Width (Side to Side):
250mm

ULTRA COMPACT AND LIGHTWEIGHT - Ultra-compact and lightweight unit weighing just 4kg approx.
IDEAL FOR A MOBILE TECHNICIAN - Portability allows the welder to be taken to the job at hand, ideal for mobile technicians.
SUITABLE FOR MOST ARC/MMA WELDING RODS - Unit can ARC/MMA weld a variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø5mm.
USER FRIENDLY FUNCTIONS - Features LED display, with thermal cut-out protection, anti-stick, arc force and hot start functions.
SUPPLIED WITH - Supplied with 1.6m 25mm² cable with electrode holder and a 1.4m 25mm² earth clamp and cable, both with 10-25 dinse connectors.

Nett Weight:
4.8kg

Welding Current:
20-200A

Duty Cycle:
60% @ 200A, 100% @ 155A

Absorbed Power:
9kW

Electrode Capacity:
1.6-5.0mm

Supply:
230V - 16A*

Plug Type:
Bare Wire

Power Supply Cable Length:
2m

IP Rating:
IP21S

Weight:
4.8kg

*Note
To achieve maximum power a 16A supply may be required.

Powerful rotary hammer drill with SDS MAX chuck.
2-Functions, hammer and rotary hammer.
Anti-vibration shock absorbers built into body.
Safety clutch system.
LED Mains power indicator.
Easy-access grease plug for gear maintenance.
Supplied in storage case with 18mm masonry drill bit, pin chisel, PVC dust cap and depth gauge.
Fitted with 360° auxiliary handle.

Chuck Type:
SDS Max

Concrete Drilling Diameter:
Ø40mm

Drilling capacity:
Concrete:
40mm

Impact Energy:
12J

Impact Rate:
3780bpm

Nett Weight:
6.8kg

No-Load Speed:
0-480rpm

Compact and lightweight unit.
Unit can ARC/MMA weld a variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø3.2mm.
Features thermal cut-out protection, anti-stick, arc force and hot start functions.
Portability allows the welder to be taken to the job at hand, ideal for the mobile technicians.
Supplied with 2m 16mm² cable with electrode holder and a 2m 16mm² earth clamp and cable, both with 35-70 quick connectors.
Forced air cooling system.
3 Year guarantee*.

Nett Weight:
4.9kg

Welding Current:
20-140A

Duty Cycle:
100% @ 63A, 60% @ 81A, 20% @ 140A

Electrode Capacity:
Ø1.6-3.2mm

Absorbed Power:
5.75kW

Supply:
230V-13A* *Note: To achieve maximum power a 32A supply may be required.

Protection:
IP21S

Weight:
4.9kg

Glides over the material. And right through the middle. For "push" cutting.
You are looking for a film and foam cutter that effortlessly cuts harder and stronger film? One that's not afraid of stubborn foam? You have found the best possible solution with the SECUMAX OPTICUT. Its Teflon-coated metal foot makes it both extremely abrasion resistant and easy to slide. Glide with jam-less ease through whatever material you want to cut. Ideal for "push" cutting.

Thumbs up – for very long cuts.
The SECUMAX 564 is characterized by its thumb opening and its extra-long edge, which also makes an ideal support surface. These safety scissors enable you to completely control your work. Moreover, you need fewer cuts to complete the job of cutting through cardboard, paper, film, fabric and much more. Highest safety guaranteed by the special sharpening of the cutting edges and the rounded tips.

Yes, a cutting tool can be this SMART. With stainless steel blade.
Make one cut with this safety knife and you'll know immediately why it's called a SMART cut. Its light and compact shape is SMART. The fact that it is suitable for almost all types of cutting material is SMART. Automatic blade retraction in such a small housing is SMART. Its immense popularity as an attractive promotional knife definitely proves its SMARTness.

One use, two advantages

The SECUNORM SMARTCUT is a disposable safety knife. For you, that means: no risk of injury when changing the blade. The blade will also not get lost in the production process.

Slider on both sides

With the right hand? With the left hand? This question does not arise. Because we have fitted the SECUNORM SMARTCUT with a slider that is accessible from both sides. Choose for yourself!

Light and easy

At only 17 g, the SECUNORM SMARTCUT is a genuine light weight. This also contributes to quick and efficient cutting. Without hands and arms getting tired.

Perfect handling

The product does not only look handy. Its small, rounded handle really sits comfortably in your hand. And there’s much more: So that your thumb doesn’t slip, the slider has grooves.

You can’t lose it

As compact as the SECUNORM SMARTCUT is - there is an eyelet for tethering the safety knife to you or the work station.

The SECUMAX 150 MDP resolves several issues in one. With its concealed blade, you will never have to worry about injuring yourself or damaging your goods. Thanks to its versatility, you only need the one tool to cut, scrape and split. Main customer benefit: specially designed for sensitive manufacturing processes, the SECUNORM 150 MDP is made of metal detectable plastic to ensure that it is always retrievable.

Metal detectable

You are on the safe side when using the SECUMAX 150 MDP in areas requiring caution. The detectors are effective in the event that the disposable tool – or parts of it – unintentionally enter the production process.

Stainless steel blade

Stainless steel blades are standard in the SECUMAX 150 MDP – optimal for regular use under demanding conditions and for cleaning with water.

3-in-1 blade head

The SECUMAX 150 MDP fits like a glove. It's so comfortable to hold, that it feels like an extension of your hand. With it you can cut cardboard, split tape, open plastic strapping… you can even scrape residue off surfaces.

Concealed blade

This safety knife doesn't need a sharp tip to be a smart knife. The blade is securely concealed so that it presents no risk to you or your goods when opening packages.

Ergonomically shaped

Right handed? Left handed? It’s really all the same. Because the SECUMAX 150 MDP perfectly fits any hand – even in gloves. The large handle surface feels particularly pleasant as a secure place for the thumb, fingers and hand.

The SECUNORM MULTISAFE is a real classic now also available with a unpainted handle. It provides excellent durability thanks to its handle made of zinc and its uncomplicated, robust design. With its notable blade extension, you can cut all standard materials. Should you have any particular requirements, you can re-fit the SECUNORM MULTISAFE with one of our many optional blades.

Robust design

As you can see and feel, the SECUNORM MULTISAFE is extremely stable. And flexible, since you can use a large number of blade shapes. The safety knife is therefore suitable for many cutting applications.

Made of unpainted solid metal

The SECUNORM MULTISAFE is a moulded tool. Made from zinc die-casting. With its unpainted handle, it is especially valued in sensitive sectors.

Slider on top

With the right or with the left hand, you ask? Left and right, is the answer! The metal slider is on top of the handle. And can thus be easily used with either thumb.

2-cutting edge blade

Before you have to change the quality blade, you can turn it over once. This doubles the usage time of the blade – and reduces your energy consumption. Because your SECUNORM MULTISAFE will cut again like new.

Eyelet for fastening

Ever since its introduction the SECUNORM MULTISAFE is equipped with an eyelet for tethering your knife to you or a work station.

One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.
Range: 60-330Nm(44.3-243.5lb.ft).
Flip reverse Chrome Vanadium steel ratchet head with smooth action mechanism.
Scale graduated in Nm and lb.ft.
Calibration tolerance in accordance with BS EN ISO 6789-1:2017.
Wrenches are individually tested to standards with ±4% accuracy and each wrench is issued with an individually numbered test certificate.
Aluminium knurled handle for comfort and control.
Supplied in an EVA tray.
Lifetime guarantee*.

Drive:
1/2"Sq Drive

Length:
575mm

Nett Weight:
1.38kg

Range:
60-330Nm (44.3-243.5lb.ft)

Main features:
• Worktop (2,100x750 mm) made from multi-ply wood, 38 mm thick
• 4 drawers (367x588 mm) with ball bearing slides:
2 drawers 70 mm high
2 drawers 140 mm high.
• Drawer bases protected by foamed rubber mats
• Each drawer can accommodate up to 4 EVA foam or ABS thermoformed trays
• Front centralized lock
• 1 module with door and lock
• Steel frame with 2 supporting legs
• Holes for a vice (1599F/150 - 1599GI/150, to be ordered separately)
• 2 lower half-shelves for objects, 1,788x335 mm; thickness: 40 mm
• Static load capacity: 800 kg, evenly distributed
• Can be fixed to floor

Kit with 4 perforated tool panels, comprising the following:
• 3 supporting brackets
• 6 400-mm uprights
• 2 1,015-mm supports; can accommodate 1 19" rack multi-socket (not included)
• 4 perforated tool panels, 1,015x25x400 mm


 161 kg
2.100x750x1.860 mm

Features:
● Ultra-strength instant adhesion
● High mechanical resistance, final force and elastic module
● Free from isocyanates, phthalates, solvents and silicone
● Permanently elastic, does not shrink, bubble-free, odourless
● Resistant to humidity and weathering
● Adheres primer-free to most substrates, including wet ones


DIRECTION FOR USE
Apply the adhesive in vertical strips 10-20 cm apart. Bring the materials into position and press hard, so that the adhesive can be at least 2-3 mm thick. Do not apply the adhesive in dots.
Application temperature: +5 °C ÷ +40 °C (for both substrates and the environment). Extrude by means of a bonding gun and the ‘V’ nozzle supplied with the adhesive. The substrates must be solid and free from grease and dust. Test before application.

Main features:
• Worktop (2,100x750 mm) made from multi-ply wood, 38 mm thick
• 4 drawers (367x588 mm) with ball bearing slides:
2 drawers 70 mm high
2 drawers 140 mm high.
• Drawer bases protected by foamed rubber mats
• Each drawer can accommodate up to 4 EVA foam or ABS thermoformed trays
• Front centralized lock
• 1 module with door and lock
• Steel frame with 2 supporting legs
• Holes for a vice (1599F/150 - 1599GI/150, to be ordered separately)
• 2 lower half-shelves for objects, 1,788x335 mm; thickness: 40 mm
• Static load capacity: 800 kg, evenly distributed
• Can be fixed to floor

Kit with 4 perforated tool panels, comprising the following:
• 3 supporting brackets
• 6 400-mm uprights
• 2 1,015-mm supports; can accommodate 1 19" rack multi-socket (not included)
• 4 perforated tool panels, 1,015x25x400 mm


 161 kg
2.100x750x904 mm

Main features:
• 1 fully removable drawer (1,176x367 mm), with ball bearing slides
• 7 fully removable drawers (882x367 mm), with ball bearing slides:
6 drawers 70 mm high
1 drawer 140 mm high

• Worktop made from stainless steel coated MDF, with holes for vice item 1599F/125 or 1599GI/125 (to be ordered separately) and 6 tote trays
• Sturdy nylon fronts, with built-in label holders
• Drawer bases protected by foamed rubber mats
• Removable side compartment, with ball bearing slides, with shelf and lock
• 4 castors, Ø 150 mm: 2 fixed and 2 steering with brakes
• 3 safety locks
• Built-in paper roll holder
• Built-in bottle holder
• Static load capacity: 1,100 kg

Following trays can be added:
up to 8 EVA foam or ABS thermoformed trays in drawer 1,176x367 mm
up to 6 EVA foam or ABS thermoformed trays in drawer 882x367 mm


Following accessories can be added:
• Perforated tool panel with supports 2400 RSC24AXXL/PF
• Computer wall bracket 2400 RSC24/SPC
• Side tool tray 2400 RSC24AXLP/VL
• Waste bin 2400 RSC24AXLP/CPR
• Folding side shelf 2400 RSC24/MP
 131 kg

The tool for manually pushing back brake pistons, fitted with two swivel plates and a ratchet movement mechanism, means an effective, flexible solution for quick jobs - e.g. on commercial vehicles.


 819 g

Composed of:

C55B/2.8
Workbench with worktop 2850x700 mm covered with a shockproof, nonscratch, ABS coat resistant to oils and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55MS
Fixed service module
• Built-in waste bin
• Paper roll compartment
• Storage drawer, 305x270 mm

C55C7
Mobile roller cab with seven drawers
(588x367 mm), with ball bearing slides
• 4 castors, Ø 100 mm, 2 fixed and 2 steering (one with brake)
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with foam trays

C55M7
Fixed module with seven drawers
(588x367 mm), with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with thermoformed trays


C55PM + C55PT1,0x0,6 + C55/PF
• 2 suspended cabinets (1024x400x300 mm) fitted with gas springs
• 2 under-cabinet panels (1024x620x25 mm)
• 2 perforated under-cabinet tool panels (1024x620x25 mm)

C55PM/M0.8 + C55PT0.8x0.6 + C55/1PF
• 1 suspended cabinet (800x400x300 mm) fitted with gas springs
• 1 under-cabinet panel (800x620x25 mm)
• 1 perforated under-cabinet tool panel (800x620x25 mm)


 467 kg

Composed of:

C55B/2.8
Workbench with worktop 2850x700 mm covered with a shockproof, nonscratch, ABS coat resistant to oil and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55M7
Fixed module with seven drawers
(588x367 mm), with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with foam trays

C55MA
Fixed two-door module
• Push-pull opening system
• With lock
• Interior shelf, vertically adjustable

C55M4
Fixed module with four drawers
(588x367 mm), with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with foam trays

C55PM + C55PT1,0x0.6 + C55/PF
• 2 suspended cabinets (1024x400x300 mm) fitted with gas springs
• 2 under-cabinet panels (1024x620x25 mm)
• 2 perforated under-cabinet tool panels (1024x620x25 mm)

C55PM/M0.8 + C55PT0.8x0.6 + C55/1PF
• 1 suspended cabinet (800x400x300 mm) fitted with gas springs
• 1 under-cabinet panel (800x620x25 mm)
• 1 perforated under-cabinet tool panel (800x620x25 mm)

C55A2
• 1 two-door tool cabinet


 535 kg

Composed of:

C55B
Workbench with worktop (2050x700 mm) covered with a shockproof, nonscratch ABS coat resistant to oils and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55C7
Mobile roller cab with seven drawers (588x367 mm) with ball bearing slides
• 4 castors Ø 100 mm, 2 fixed and 2 steering (one with brake)
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralized lock
• Can be fitted with thermoformed trays

C55MA
Fixed two-door module
• Push-pull opening system
• With lock
• Interior shelf, vertically adjustable

C55PS
Tool wall system with shutter and framework
• Aluminium shutter, vertically adjustable, with lock
• Removable perforated tool panel


 347 kg

Composed of:

C55B
Workbench with worktop (2050x700 mm) covered with a shockproof, nonscratch ABS coat resistant to oils and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55M7
Fixed module with seven drawers (588x367 mm) with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralized lock
• Can be fitted with thermoformed trays

C55MS
Fixed service module
• Built-in waste bin
• Paper roll compartment
• Storage drawer, 305x270 mm

C55/2PM + C55/PF
Tool wall system with 2 suspended cabinets
• 2 suspended cabinets, 1024x400x300 mm, with gas springs
• 2 under-cabinet panels, 1024x620x25mm
• 2 under-cabinet perforated tool panels, 1024x620x25 mm


 350 kg

​Coloured bits for immediate head recognition.

Each head has a different colour for quick identification.
Small, compact ratchet for jobs in small areas; recommended for general maintenance: automation, assembly lines.

Main feautures:
∙ 5 degree take-up angle
∙ Knurled head for quick mechanism handling
∙ Sealing magnet
∙ Can be used with bits and sockets

Ideal for jobs in small areas

– Ultracompact, no more than 176 mm in length; ultralightweight, no more than 1.1 kg, with battery, perfectly balanced
– Double mechanical speed with steel gears and 18-position clutch
– Torque up to 34 Nm and 1500 rpm (350 rpm in 1st gear); drills diameters up to 10 mm in steel and 20 mm in wood
– 2Ah batteries and charge indicator on drill body
– Triple battery self-protection (heat, overload and monitoring of charge differences (if any) between cells) for increased safety and durable high performance
– Ergonomic nonslip handle
– Front LED
– 10-mm autochuck
– Belt clip (right/left side)
– Selector switch, screwing-unscrewing-locking modes (for transportation)
– Supplied in a hard case with 2 lithium ion batteries (2 Ah) and quick charger (45 min)

• Die-cast aluminium body plated with black chemical nickel
• Nylon cup with drip-catching device, 3/8M BSP thread
• Body thread: 1/4" BSP cylindrical gas thread
• Pressure and airflow regulator
• Jet regulator from round to fan spray pattern
• Paint quantity regulator
• Supplied with service spanner for maintenance operations

100% Italian made: unparalleled reliability and sturdiness
for professional uses
Particularly recommended for surface finishing jobs on several materials (metal, plastic, glass, ceramic, wood etc.). The cabin is made from properly reinforced sheet steel which results in unparalleled sturdiness and firmness.
The cabin is equipped with the following:
- loading door with magnet closure
- perforated sheet metal top
- standard connection for vacuum cleaners, ø 36 mm
- protective polycarbonate viewing window, 6 mm
- LED lamp
- pneumatic circuit (compressed air inlet)
- sanding gun with trigger operation


TECHNICAL DATA
Useful dimensions of cabin: 600x520x320 mm
Overall dimensions: 660x530x500 mm
Weight: 38 kg
Worktop: perforated sheet metal
Lighting: LED
Air consumption: 340 l/min at 7 atm
Power supply: 220 V - 50 Hz

DEWALT DCS565N-XJ 18V XR 165mm Circular Saw, Bare Unit

Variable adjustment of the bevel angle to 50 degrees
Model number; dEWDCS565N
Dust blower and LED work light ensure cutline visibility
Include brushless motor for extended run-time, reliability and durability
Durable tool design including a cast aluminum base for accurate cuts

Product Overview
Ready to take on a variety of your cutting applications. The DCS565 18V XR 165mm Circular Saw combines performance and versatility and features a powerful brushless motor that delivers 4,950 rpm for fast, accurate, and consistent cutting. Tool-free depth and bevel adjustments provides a max depth of cut of 55mm at 90° along with a max bevel of 50°.



Additional Features
DEWALT Brushless Motor for extended run-time, reliability & durability
Extremely durable tool design, including a cast aluminum base for repetitive, accurate cuts
Variable adjustment of the bevel angle to 50 degrees
Ultra thin kerf 165 mm, 24 tooth carbide-tipped blade allows for efficient run time and fast, smooth cut finish at maximum 55 mm depth of cut
Optimum balance for safe, fatigue-free operation
Lock off switch and electronic motor brake for additional control and work safety
Additional handle for safe two-handed work
Direct compatibility with DEWALT AirLock system for easy, secure connection to extraction hose
Convenient storage on the jobsite with the built-in rafter hook
Dust blower clears dust and debris from cut line

T145
Hard thermoformed tray with tool assortment

 640 g

 1032 circlip pliers straight, internal  180 mm
 1034 circlip pliers bent, internal  170 mm
 1036 circlip pliers straight, external  175 mm
 1038 circlip pliers bent, external  175 mm

Product Name Art.
024240145 T145
hard thermoformed tray with tool assortment
1
024000448 TV145
thermoformed tray T145, empty
1

DC-powered inverter welding machine for MMA welding
The merger of BETA S.p.A. and the Italian-based welding industry leader, HELVI S.p.A., has translated into the DC inverter welding machine, BETA 1860BH, ideal for MMA welding with rutilic, basic and stainless steel electrodes.
Compact and lightweight, complete with arc force, hot start, anti-sticking and thermostatic protection features, it is the perfect choice for semi-professional maintenance jobs.

Supplied with 16 mm2 cables and hammer brush.
Power Generator Friendly.


Features

• Adjustment current:10÷120A
• Power supply: 1x230V
• Use factor (40 °C) :
25% - 120 A
50% - 80 A
100% - 60 A
• Protection: IP22S
• Usable electrodes: Ø 1.6 - 3.2mm rutilic, basic, stainless steel, cast iron etc.
• Supplied with 16mm² cables

Inverter welding machine for MMA welding
The merger of BETA S.p.A. and the Italian-based welding industry leader, HELVI S.p.A., has translated into the DC inverter welding machine, BETA 1860BH, ideal for MMA welding with rutilic, basic and stainless steel electrodes.
Compact and lightweight, complete with arc force, hot start, anti-sticking and thermostatic protection features, it is the perfect choice for semi-professional maintenance jobs.

Supplied with 16 mm2 cables and hammer brush.
Power Generator Friendly.


Features

• Adjustment current: 10÷160A
• Power supply: 1x230V
• Use factor (40 °C) :
25% - 160 A
60% - 100 A
100% - 80 A
• Protection: IP22S
• Usable electrodes: Ø 1.6 - 4mm rutilic, basic, stainless steel, cast iron etc.
• Supplied with 16mm² cables

Measuring tapes with fixed magnets
Features:
• Shock-resistant ABS casings
• Steel tapes
• Precision class: II

Folding tool trolley for outdoor jobs
Can be transported on a vehicle.
Folding tool trolley. Its unique patented design guarantees an effortless transport.

Features:
• 2 drawers, 588x277 mm, with ball bearing slides, for two-way opening
• Large lower object compartment, 588x277x220 mm
• Sheet metal frame
• 2 fixed castors, Ø 160 mm, and 2 steering castors with brake, Ø 100 mm
• Thermoplastic worktop with 6 built-in tool trays
• Centralized lock
• Can accommodate drawer partitions and MC foam tool trays

 20 kg
 990x390x700 mm

Portable induction heater
Quick loosening of nuts and bolts.
Maximum safety without using flames.


Heats and loosens bolts, hubs and bearings without using flames.
Allows any type of ferromagnetic metal to be heated.

Standard equipment:
• Two front attachable coils, Ø 19 and 26 mm, for loosening nuts
• One flat coil for heating surfaces
• One flexible coil, 800 mm long
• Supplied in plastic case

Technical data:
• Input voltage: 230V AC, 50/60 Hz
• Input current: max. 7,5A
• Power: max. 1.75 kW

Optional Equipment:
• Coils are also available in other sizes

Benefits:
• Time saving: quick, extremely accurate heating
• Fire safety: does not produce flames, maximum operator safety
• Functional: can be used with one hand, and coils can be easily interchanged

Fields of Application:
• Automotive industry
• Industrial maintenance
• Aviation industry
• Naval industry
• Petrochemical industry

480x370x130 mm -  4,5 kg

Makes it possible to work on vehicles that are high from the ground and have a long shock absorber travel:

Features:
• Controlled descent speed
• Quick approach pedal
• Nylon wheels

Ultracompact: no more than 160 mm in length; ultralightweight: no more than 1 kg, with battery, and perfectly balanced.
Ideal for jobs in small areas, provides high torque (80 Nm), one-handed operation.

Features:
• 1/4" hexagon drive with locknut
• belt clip (right/left side)
• front LED
• selector switch, screwing-unscrewing-locking modes (for transportation)
• ergonomic nonslip handle
• gearcase made entirely of metal
• 2Ah batteries with charge indicator on impact wrench body
• supplied in a hard case with 2 lithium ion batteries (2 Ah) and quick charger (50 min)

Main features:
• 6 fully removable drawers (588x367 mm), with ball bearing slides:
4 drawers 70 mm high
1 drawer 140 mm high
1 drawer 280 mm high

Features:
• ABS reinforced worktop, solid and sturdy
• Multi-purpose top with anti-fall edges and 8 holes for accommodating screwdrivers
• 4 castors Ø 125 mm - 2 fixed and 2 steering (one with brake)
• Front centralised safety lock
• Static load capacity: 800 kg

Mobile roller cab with 7 drawers, with wood worktop and anti-tilt system, long model
Work surface increased by no less than 25%!
Long model with 7 fully removable drawers (882x367 mm), with ball bearing slides:
• 5 drawers, 70 mm high
• 1 drawer, 140 mm high
• 1 drawer, 210 mm high

• Multi-ply wood worktop with holes for a vice 1599F/100 or 1599GI/100 (to be ordered separately)
• Sturdy nylon front, with built-in label holder
• Drawer bases protected by foamed rubber mats
• 4 castors, Ø 125 mm: 2 fixed and 2 steering (one with brake)
• Front centralized safety lock
• Static load capacity: 1.100 kg
• Built-in side bottle holder (can be applied on both sides)
• Built-in paper roll holder
• Each drawer can accommodate up to 6 EVA foam or ABS thermoformed trays


Following accessories can be added:
• perforated tool panel with supports 2400 RSC24AXLP/PF
• computer bracket 2400 RSC24/SPC
• side tool tray 2400 RSC24AXLP/VL
• waste bin 2400 RSC24AXLP/CPR
• folding side shelf 2400 RSC24/MP
 105 kg

For precision jobs.
In compact anodized aluminium case.


 200 g
 130x60x35 mm -  200 g

The evolution of the C24S roller cab!
Reinforced worktop and a wide range of dedicated accessories!
Available in 7 different colour combinations!
New ABS reinforced worktop, designed to support tool chests RSC22, RSC23, RSC23C and RSC23T.
Main features:
• 7 fully removable drawers (588x367 mm), with ball bearing slides:
5 drawers, 70 mm high
1 drawer, 140 mm high
1 drawer, 210 mm high
• Multi-purpose top with anti-fall edges and eight holes for accommodating screwdrivers
• Four castors Ø 125 mm:
2 fixed and 2 steering (one with brake).
• Front centralized safety lock.
• Static load capacity: 800 kg.
• Built-in bottle holder (can be applied on both sides).
• The following accessories can be added:
wood worktop 2400 RSC24/PL
perforated tool panel 2400 RSC24/PF
folding shelf 2400 RSC24/MP
computer wall bracket 2400 RSC24/SPC
document holder 2400 RSC24//PD (available in anthracite grey or black)
paper roll holder 2400 RSC24/PC (available in anthracite grey or black)
• Drawer bases protected by foamed rubber mats.
• Each drawer can accommodate up to 4 EVA foam or ABS thermoformed trays.

A professional solution, ideal for light carpentry and maintenance jobs, the inverter welding machine, 1860BHT/160A, stands out as a first-rate item developed from the merger of BETA S.p.A. and the Italian-based welding industry leader, HELVI S.p.A.
This DC-powered inverter welding machine can be used for both MMA welding with rutilic, basic and stainless steel electrodes, and TIG steel welding.
Compact and lightweight, the welding machine supports the arc force, STICK/TIG (lift arc), hot start, anti-sticking and thermostatic protection features.


Features:
• Adjustment current: 10÷160A
• Power supply: 1x230V
• Use factor (40 °C) :
35% - 160 A
60% - 130 A
100% - 95 A
• Protection: IP23S
• Usable electrodes: Ø 1.6 - 4 mm rutilic, basic, stainless steel.
• Supplied with 25 mm² cables
• Dimensions: 360x140x230 mm
• Welding machine weight: 6.2 kg
• Torch length: 4 m

Workshop equipment Beta RSC50.
The new range of workshop equipment is characterised by attention to detail and refined finishes.

Comprehensive combination comprising:
• 1 single-door tool cabinet (RSC50 A1)
• 1 750-mm-long worktop (RSC50 PG/1-0,7MT)
• 1 2.240-mm-long worktop (RSC50 PG/3-2,2MT)
• 1 mobile roller cab with 7 drawers (RSC50 C7)
• 1 fixed module with 4 drawers (RSC50 M4)
• 1 fixed module with 7 drawers (RSC50 M7)
• 1 fixed service module (RSC50 MS-AVV) with compressed air hose reel item 1900S 8x10 (included)
• 1 tool wall system with aluminium shutter and framework (RSC50 PS)
• 2 wall-mounted cabinets (RSC50 PM)
• 2 upper perforated tool panels (RSC50 PFS)
• 2 lower perforated tool panels (RSC50 PFI)
• 2 pairs of right/left uprights (RSC50 P/2MDX-SX)
• 1 two-door tool cabinet (RSC50 A2)

Design and Quality Made in Italy

The new workshop equipment is designed and manufactured in Beta's Italian factories, with the utmost attention to detail and choice of quality materials. The new range comprises preassembled combinations, developed by Beta for professionals; alternatively, you can design your workplace on your own, choosing from many under-bench modules, wall-mounted cabinets and furnishing accessories.


Deep and sturdy work surface
New sturdy and very deep worktop (63 cm) for a large, comfortable and functional work surface. It can be fitted with a vice, thereby allowing heavy-duty jobs to be carried out.

Wide range of compatible assortments
The drawers in Beta’s standard dimensions (588x367 mm) can accomodate the numerous tool modules, which are available in both soft and hard versions, made from EVA and ABS respectively.

Customisable modules
The customized colours of the drawer handles and lights under the worktops and wall-mounted cabinets result in unique workshop equipment.

Simple, Quick Installation
RSC50 range’s modules have been conceived and designed so that they can be assembled intuitively and quickly. In fact, thanks to optimized production of the various parts of the range, assembly of the RSC50 equipment involves fewer steps than other lines of workshop equipment.

Professional model.

DeWALT DCF850E2T-GB 18V XR Brushless Impact Driver With 2x Powerstack Batteries

Discover the ultimate companion for professionals seeking durability and efficiency: the DeWALT DCF850E2T-GB 18V XR Brushless Impact Driver. Engineered for unparalleled power and speed, this impact driver is fueled by its 18V power supply and compact design, delivering exceptional performance across a variety of tasks. Equipped with a 1/4" HEX handle, LED lighting, and intuitive speed regulation via a touch panel, it offers universal adaptability for professionals like installers or carpenters who demand reliability and mobility. Experience the advantages of extended tool life, heightened efficiency, and reduced energy consumption, all while enjoying the comfort of work in confined spaces. With precise speed regulation for optimal results, this impact driver boasts 2 gears plus an additional mode, rotational speeds ranging from 0-1500 to 3800/min, and a maximum impact frequency of up to 0-4500 beats/min. Elevate your craftsmanship with the DeWALT DCF850E2T-GB – where performance meets perfection.

Features
18V battery power supply : Enables convenient operation without the limitations of a cable.
Brushless motor : Provides longer tool life and higher work efficiency.
Compact design : Makes it easier to work in confined spaces.
1/4" HEX work holder : Quick and easy bit replacement.
Adjustable LED lighting : Possibility to adjust the light intensity.
multi-point, ring LED lighting : significantly improves comfort in the workplace and visibility of the screw, drill or bit.
Speed control in the panel : Allows precise control of modes (low/medium/high).
Version with power supply kit : Supplied with two batteries and a charger in a TSTAK case.
Specification
Motor type: Brushless motor
Power supply: rechargeable
Supply voltage: 18V
Series: Dewalt 18V
Batteries included: 2
Number of gears: 2 gears + additional mode
Rotational speed: 0-1500/3800/3300/min
Maximum impact frequency: 0-4500/min
Maximum torque: - Nm

Standard Equipment

1x DeWalt DCF850E2T-GB 18V XR Brushless Impact Driver
2x DeWALT DCBP034-XJ 18V XR Compact Powerstack Battery Pack
1x DeWALT DCB1102 18V XR Compact Powerstack Charger
1x DeWALT TSTAK Carry Case

Warranty

1 year

DEWDCE530N DCE530N XR Cordless Heat Gun 18V Bare Unit


DeWalt DCE530N 18V XR Heat Gun (Body Only)


The DeWalt DCE530N 18V XR Cordless Heat Gun is a must have tool for a wide range of applications on site such as shrinking electrical tubing, bending PVC pipes, drying materials, loosening nuts and bolts and many more. The heat gun features a compact size, 2 temperature settings with a low of 290° and maximum of 530°C, to allow for maximum versatility in applications. A lock-on switch improves comfort on longer jobs and allows for hands-free use. The lock-off switch prevents an accidental start-up during transportation and storage, reducing the risk of thermal accidents. The heat gun is compatible with all 18V XR batteries

Features:
Reaches a temperature of 530°C on a high setting and 290°C on a low setting.
A built-in LED light illuminates the workplace and improves visibility in small, confined spaces.
Fully compatible with all DeWalt 18v XR batteries.
Keep the tool switched on using the lock-on button to improve comfort for longer applications and hands-free use.
The trigger with a built-in lock-off switch prevents an accidental start-up during transportation and storage, reducing risk of thermal accidents.
Improving comfort for longer applications and the side air vents expel hot air from the sides to reduce any risk of over-heating.
Specifications:
Voltage: 18v
Temperature: 290-530 °C
Airflow: 109-190 l/min
Integrated LED Light: Yes
Lock-On-Switch: Yes
Length: 160 mm
Width: 200 mm
Height: 55 mm
Weight: 0.5 kg

In The Box:
1 x DCE530N Heat Gun Body Only
1 x Reflector Nozzle
1 x Surface Nozzle

This Scan First Aid Kit comes in a compact 'briefcase' style kit box made of polycarbonate. Inculdes sufficient content to safeguard 1-25 persons in a workplace. Approved by the British Standards Institute. Contains: 1 x CoolTherm Burn Relief Dressing 10 x 10cm2 x Single Use Triangular Bandages 90 x 127cm40 x Assorted Waterproof Plasters2 x Medium Sterile HSE Dressings 12 x 12cm (unboxed)2 x Large Sterile HSE Dressings 18 x 18cm (unboxed)1 x Conforming Bandage 7.5cm x 4m1 x Finger Dressing with Adhesive Fixing 3.5cm2 x SterileEye Pad Dressing no.16 with Bandage (Flow Wrapped)1 x Microporous Tape 2.5cm x 5m20 x Cleansing Wipes1 x Pair of Small Universal Shears 6in1 x Adult Sized Foil Blanket 130 x 210cm6 x Pairs ofNitrile Gloves1 x Rebreath Mouth to Mouth Resuscitation Device with Valve1 x First Aid Guidance Leaflet

This Scan First Aid Kit comes in a compact 'briefcase' style kit box made of polycarbonate. Inculdes sufficient content to safeguard 1-100 persons in a workplace. Approved by the British Standards Institute. Contains: 2 x CoolTherm Burn Relief Dressings 10 x 10cm3 x Single Use Triangular Bandages 90 x 127cm60 x Assorted Waterproof Plasters4 x Medium Sterile HSE Dressings 12 x 12cm (unboxed)3 x Large Sterile HSE Dressings 18 x 18cm (unboxed)2 x Conforming Bandages 7.5cm x 4m3 x Finger Dressing with Adhesive Fixing 3.5cm3 x Sterile Eye Pad Dressing no.16 with Bandage (Flow Wrapped)2 x Microporous Tapes 2.5cm x 5m30 x Cleansing Wipes1 x Pair of Small Universal Shears 6in2 x Adult Sized Foil Blankets 130 x 210cm9 x Pairs of Nitrile Gloves1 x Rebreath Mouth to Mouth Resuscitation Device with Valve1 x First Aid Guidance Leaflet

This SCAN Sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. Printed with UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 and/or ISO 7010 design criteria where applicable. Helps limit company liability should accident occur. Specification: Size: 400 x 600mmMessage: Details on how to treat an electric shock casualty

This Scan 'Fire extinguisher composite' safety sign is for Carbon Dioxide (CO2) extinguishers, and measures 75 x 200mm. It is printed on 1.3mm thick, rigid material with UV resistant inks to prevent fading. The sign is photoluminescent, which means that it will glow in the dark. The PVC sign is self-adhesive, making it easy to attach to any wall. It is perfect for alerting people to and providing guidance on the uses of CO2 fire extinguishers. The sign exceeds PSPA Class 1 classification. It is non toxic and non radioactive with no lead of phosphorous. Complies with BS5499 and/or ISO7010 design criteria where applicable. Helps limit company liability should an accident occur.

The Kidde Multipurpose Dry Powder Fire Extinguisher is ideal for use on most types of small domestic or vehicle fires. The pressure gauge confirms that the extinguisher is ready to use (when the needle is in the green zone). It has an 8 second discharge and 4m range. BS EN3 Fire Rating 8A 34BC - safe for use on electrical fires, CE Tested and certified. For use with A, B or C category fires.A: Wood, paperB: Flammable liquids, petrolC: Gaseous fires

The Kidde FB1 Fire Blanket can be used on fat-pan fires in the kitchen, where it would not be recommended to use a fire extinguisher due the potential risk of spreading the burning fat or oil. A fire blanket should be present in all homes and is an essential fire safety product. It has an easy, wall-mountable design. Can also be used to wrap around a person whose clothing has caught alight. BAFE BS EN-1869 Approved. 5 Year Cloth Guarantee.

The Kidde 10SCO is a battery-powered combination alarm that offers protection from the dual dangers of smoke and carbon monoxide (CO) in a single unit for convenience. Its voice alarm feature audibly announces which danger has been detected. The alarm has a peak level memory, which provides notification (voice and LED) when dangerous CO levels have been previously detected. Its front loading battery compartment makes changing the battery easy and convenient. The 10SCO has a Hush™ button to temporarily silence nuisance alarms. It also has a test/reset button to allow regular testing of the alarm function. Designed to be wall or ceiling mounted, this battery-powered unit is perfect for when space is limited but protection is paramount. It can be used in most locations throughout the home. BSI certified to EN14604:2005 (Smoke).BSI certified to EN50291-1:2010 (Carbon monoxide).CE tested and certified.

The Kidde 10LLDCO Alarm is sleek and lightweight with a non-replaceable, sealed-in Lithium battery which provides 10 years of continuous protection, meaning the battery will not have to be changed for the duration of the alarm's life. Itsdigital display clearly shows the levels of carbon monoxide. A peak level display allows the highest CO level recorded (between 11 - 999ppm) to be displayed. The 10LLDCO has a unique, water-based Kidde CO Electrochemical Sensor. It features a CO 'Quick-Test' feature allowing the alarm to be temporarily desensitised to allow quick testing using approved CO spray. The alarm's interrogation feature allows peak level and test history to be analysed by Kidde upon arrangement. It has 3 LED's - alarm, operate and fault, and an end-of-life warning alerting the user when to replace the alarm. A test/reset button allows regular testing of the alarm function. Ideal for use in all living areas and can be installed on a wall, or ceiling, or used free-standing on a table or shelf. It is also easily portable so can be taken on holidays. BSI Certified to EN52091-1.CE Tested Certified.

The Kidde 10LLCO Carbon Monoxide Alarm is sleek and lightweight with a non-replaceable, sealed-in Lithium battery which provides 10 years of continuous protection, meaning that the battery will not have to be changed for the duration of the alarms life. It has a unique water-based Kidde CO Electrochemical Sensor and features an alarm memory, meaning that a red LED will flash every 60 seconds to indicate a CO event has occurred. A CO Quick-Test feature temporarily desensitises the CO sensor to allow quick-testing using approved CO sprays. An interrogation feature allows peak level, test history to be analysed by Kidde upon arrangement. The alarm has 3 LEDs - alarm, operate and fault. Its end-of-life alarm alerts the user to replace the alarm. A test/reset button allows regular testing of the alarm function. Ideal for use in all living areas and can be installed on a wall or ceiling or used free-standing on a table or shelf. It is also easily portable so can be taken away on holidays. BSI Certified to EN52091-1.CE Tested Certified.

The Stanley FatMax 1-92-980 Telescopic Sawhorse features adjustable telescopic legs, that are ideal for use on difficult and uneven surfaces. The height is adjustable to a maximum of 1025mm with up to 215mm extension on each leg. The heavy-duty metal legs allow a high load-bearing capacity of 1135kg (2500lbs per pair) and they only weigh 5.25kg each (12lbs) so they are light and easy to carry. The bi-material feet are made out of aluminium-polypropylene and they can be adjusted individually. Supplied as a Twin Pack. Specification: Max. Load: 1135kg (2500lbs) per pair

The Stanley Tools FatMax Express Folding Workbench is ideal for professional tradesmen who require a robust, portable working surface with substantial material capacity. This versatile and ergonomically-engineered workbench has been designed with a spacious work platform (85 x 60cm) suitable for a host of pro applications, including hand and electric sawing, drilling, screwdriving, gluing, precision woodworking, spray painting, part cleaning, and all jobs that require materials to be fixed securely into place. Compatible with an extensive range of vertical and horizontal clamps, including the STANLEY FATMAX Trigger Clamp series, the Express Folding Workbench features a series of dog bench holes and x-shaped grooves, allowing straightforward clamping of wood, metal or plastic items at any angle. Thanks to its quick collapsing, durable metal legs, the FATMAX Express Folding Workbench can be easily set up in seconds and is exceptionally solid and stable, supporting up to 455kg of material. Once each job is finished, the user can fold the workbench effortlessly into a compact unit for easy storage or transportation to the next working location. Two sturdy handles, one on the side and one at the end, add to its portable construction. Specification Max. Load: 450kgSize Open (WxDxH): 101x60x78cmSize: Folded (WxDxH): 85x60x11cmWeight: 10.4kg

This Faithfull FAITRESTLES are a pair of trestles with slip resistant worktops and securely locking legs for improved stability. Each trestle has a safe working load of 200kg (440lbs) and folds flat for easy storage and an integral handle allows easy transportation. Specifications: Height: 78cm (31in).Length: 100cm (39in).Width: 10cm (4in).Maximum recommended capacity: 400kg (880lb) per pair.

The Armorgard TuffBench™ is a durable workbench, suitable for use on construction sites as a temporary work platform. The surface is manufactured from sustainable pressed timber, designed to be long lasting, making it simple to attach working tools (for example vices and pipe threaders etc.). The legs can be folded up, which means it is a considerably smaller unit to store and makes it easier to move around site. A chain and clip are used to hold them back when in the folded position. There are no detachable parts, meaning there are no bits to lose during transportation. The frame has been powder coated to maximise usability. Specification; External Dimensions: 1080 x 750 x 820mm.Folded Dimensions: 1080 x 750 x 130mm.Weight: 28kg. 62lbs.

The Starrett Small Tool Bag is compact and ideal for carrying tools for small jobs. It has 12 external and 6 internal pockets within the main zipped compartment. The zipped compartment provides increased security and ease of storage. Comes with a removable, padded shoulder strap that is reinforced for increased durability.

The Starrett; Medium Tool Bag has a hard-wearing, ABS plastic reinforced base that is waterproof and durable. It has 7 external and 6 internal pockets in the main zipped compartment. The zipped compartment provides increased security and ease of storage. Comes with a removable, padded; shoulder strap that is reinforced for increased durability.

The Starrett Large Tool Bag has a hard-wearing, ABS plastic reinforced base with a rubber carry handle. Provides a large storage capacity and the design offers easy access to tools. It has 21; external, 6 internal pockets and 8 elasticated compartments. Comes with a removable, padded; shoulder strap that is reinforced for increased durability.

Stanley have produced a 2 in 1 mobile work station that separates in seconds into 2 units. The Stanley 193968 has an extra large toolbox with removable tray that maximises volume utility and a giant bin capacity. This Stanley mobile tool chest has many features in store and gives the user a top quality all round winner in tool storage with its swivel front drawer (carousel) and lid organizers for small parts, large trucking wheels for rough on site conditions, new one piece strong plastic handle, all weather nickel plated toolbox and side latches and with a load capacity of 88lbs you get a good array of tools at your side. The Stanley 193968 conveniently fits into your car or van, and is durable and strong. It features an extra large toolbox with removable tray and a giant lower bin to store bulky items. A swivel front drawer (carousel), and lid organisers are ideal for storing small parts. Large wheels ensure smooth mobility on rough surfaces. The handle is of durable 1-piece plastic construction. It has a load capacity of 88lbs and features nickel plated toolbox and side latches. It is durable, strong and easy to operate. Specification: Dimensions: 473 x 302 x 627mm

The Stanley Tool Bag Backpack has been designed for easy hands-free tool transport that spreads the weight of the tools instead of lifting in one hand. It contains a separate laptop/power tool compartment, that is large enough for a 15.6in laptop. With an additional small front compartment for personal storage and two side mesh pockets. Made from 600 x 600 denier fabric for maximum durability and plastic base feet to help to protect against moisture and dirt. Has a paddded back and adjustable shoulder straps for extra comfort. Fitted with extra large, rubber coated zip pull tabs for easy grip, even when wearing gloves.

The Stanley STST1-70718 Open Tool Bag is great for toting around a reasonable selection of everyday tools for most jobs, and is very well made. Plenty of pockets for smaller items. The open design allows for quick access to your hand tools. Vertical storage pockets and loops for maximum organisation and accessibility. Small organiser compartment for drill bits and small parts. It is fitted with a strong, adjustable shoulder strap. Size: 32 x 20 x 26cm (12.1/2 x 8 x 10.2/8in).

The Facom soft tote bag is constructed from extra tough fabric. It offers maximum tool protection thanks to its rigid and waterproof plastic bottom and reinforced stress points. A heavy-duty steel handle with leather grip makes lifting more secure and comfortable. The open structure makes for quick and easy tool access as it keeps everything in place, and large side pockets provide extra storage. Complete with a clip-on strap for easy carriage. The bag provides handy storage with vertical storage for instant access, an elastic tool holding strap, a side rack, many side pockets and a saw compartment.Storage capacity: 47 litres.Weight capacity: 15kg.Overall dimensions: 51 x 22 x 37cm.Weight: 2.797kg.

The Facom Rolling Probag is made from 1200 x 1200 denier fabric which is strong and robust. It provides efficient tool storage and features 6 external pockets, a saw compartment and a storage pocket for A4 documents. It allows easy access to the bottom, for practical and comfortable tool storage. The bag has a shoulder strap, aluminium handle, telescopic handle and wheels to allow it to be transported in 3 ways.

The DEWALT TSTAK™ 2.0 Mobile Storage Box has an ergonomic, telescopic handle and durable 177mm (7in) wheels for easy transportation of heavy tools. Designed to carry and transport T-STAK modules, giving the option of connecting and customising multiple units depending on what is required for a jobsite. The toolbox has a removable, half-size, internal tote tray for easy access to key hand tools, fixings and power tool accessories. A high-performance seal in the lid provides water and dust protection (IP54) to power and hand tools in the box. Other features include heavy-duty metal front latches and a padlock eye for increased security. DEWALT Tracker compatible, an internal fixing point allows the DEWALT Tracker (not supplied) to be installed and the box tracked via the DEWALT Tool Connect App. There is also a handy name panel insert, this allows boxes to be labelled for easy identification. Can be stacked and clipped to other TSTAK™ toolboxes via durable, metal pin side latches. This allows numerous boxes to be stacked and held securely together for easier transport. Specification: Dimensions (DxWxH): 435 x 515 x 635mmMax. Load: 50kg

The Armorgard PowerStation is a battery charging locker bank, designed to charge power tool batteries, and mobile phones while keeping them safe and secure, ideal for the site office.The PowerStation has six separate compartments, each containing double sockets connected in series to a 230 Volt RCD protected plug. The doors are fitted with cam locks and are perforated for ventilation.Lockers are finished in an anti-bacterial epoxy powder coat, and each lock is serial numbered for replacement keys. Specifications; External Dimensions: 300 x 460 x 1715mm.Internal: Single Locker: 300 x 385 x 315mm.Weight: 27kg (59.5lbs).

The Armorgard ToolBin is manufactured from galvanised steel. This lightweight vault is designed for storage of less valuable items, where high security is not a priority. Versatile and cost-effective, ToolBin protects your tools and materials from the elements, while keeping them safe from opportunists. It is lockable with 2 x hasp and staples, and has added strength on all four corners. There is also a double return along the bottom edge to strengthen the base. Specifications: External Dimensions: 1190 x 585 x 850mm.Internal Dimensions: 1150 x 555 x 825mm.Weight: 23kg (51lbs).

Facom Fabric Toolbox made with a very high strength (1,200 x 1,200 denier) fabric. Rigid, waterproof tool compartment, aluminium handle with leather grip and a padded shoulder strap. Elastic tool retaining strap with special screwdriver partition and easy access to the tool compartment and large number of side pockets. Adjustable saw compartment with self-adhesive strips. Dimensions: 420 x 240 x 340mm.

Boxed self assembly version. Supplied with a Titan Universal Puncture Proof Wheel that has an innovative, flexi construction that allows flex bounce for great suspension that performs like a pneumatic tyre. It is fully puncture proof, suitable for any terrain and has a strong and durable hub. Please Note: Minimum order of 20 mixed wheelbarrows only. Delivered directly to your premises by the manufacturer.

Boxed self assembly version. Supplied with a pneumatic wheel. Please Note: Minimum order of 20 mixed wheelbarrows only. Delivered directly to your premises by the manufacturer.

Boxed self assembly version. Supplied with a Titan Universal Puncture Proof Wheel that has an innovative, flexi construction that allows flex bounce for great suspension that performs like a pneumatic tyre. It is fully puncture proof, suitable for any terrain and has a strong and durable hub. Please Note: Minimum order of 20 mixed wheelbarrows only. Delivered directly to your premises by the manufacturer.

Boxed self assembly version. Supplied with a pneumatic wheel. Please Note: Minimum order of 20 mixed wheelbarrows only. Delivered directly to your premises by the manufacturer.

Boxed self assembly version. Supplied with a Titan Universal Puncture Proof Wheel that has an innovative, flexi construction that allows flex bounce for great suspension that performs like a pneumatic tyre. It is fully puncture proof, suitable for any terrain and has a strong and durable hub. Please Note: Minimum order of 20 mixed wheelbarrows only. Delivered directly to your premises by the manufacturer.

Boxed self assembly version. Supplied with a pneumatic wheel. Please Note: Minimum order of 20 mixed wheelbarrows only. Delivered directly to your premises by the manufacturer.

Boxed self assembly version. Supplied with a Titan Universal Puncture Proof Wheel that has an innovative, flexi construction that allows flex bounce for great suspension that performs like a pneumatic tyre. It is fully puncture proof, suitable for any terrain and has a strong and durable hub. Please Note: Minimum order of 20 mixed wheelbarrows only. Delivered directly to your premises by the manufacturer.

Boxed self assembly version. Supplied with a pneumatic wheel. Please Note: Minimum order of 20 mixed wheelbarrows only. Delivered directly to your premises by the manufacturer.

Boxed self assembly version. Supplied with a pneumatic wheel. Please Note: Minimum order of 20 mixed wheelbarrows only. Delivered directly to your premises by the manufacturer.