The Trend PH/JIG/BS Single Pocket Hole Jig is for fast and accurate joining of solid timber and plywood giving strong instant joints in single or multiple fixing positions. It can help to build cabinets, furniture and small joinery projects with ease. The hardened drilling sleeves provide accurate, consistent pockets. There is also a handy built-in drill depth gauge that can be reversed for new or repair work. Works with timber thicknesses from 12mm to 38mm. Portable and adaptable. Supplied with: 1 x Pack of Assorted Screws, 1 x 150mm Square Drive Bit and 1 x HSS Drill Bit with Collar.

This pack contains 4 spare location pins, which are suitable for the KWJ700 and KWJ900 worktop jigs. Made from ABS plastic for strength.

Tradesman ALL IN ONE work top jig for up to 900 mm worktops. Hard wearing solid laminate 12 mm thick jig that cuts both parts of the joint in 15-minutes including setting up and left hand and right hand corners, 400 mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100 mm radius corner, 40 mm radius corner, 35 mm kitchen door hole and 3/4 inch BSP hole for mixer taps. It covers fixed lengths for 400 mm, 500 mm, 550 mm, 600 mm, 616 mm, 650 mm, 700 mm and 900 mm wide worktops and can cuts up to 40 mm thick worktops with or without anti-drip postformed edge. Three open-ended bolt recesses (dog bone style) for 150 mm bolts. Engraved lines for short 65 mm bolts and worktop cross-cut. 10 mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Engraved markings for identification of pin holes. Specification:Length: 1185 mm. Width: 390 mm. Thickness: 12 mm. Weight: 7.7 Kg. End cut: 45 degrees. Corner radius: 40 mm. Corner radius: 100 mm. Corner radius: 400 mm. Corner mitre joint: 45 degrees.

Trend Kitchen Worktop Jig for worktops up to 650mm. Made from hard-wearing, CNC machined Compact Grade High-Pressure Laminate, 12mm thick. Cuts both parts of the joint in 15 minutes, including setting up. For cutting: left and right-hand corners, 400mm radius peninsular joint and 35mm kitchen door hole. With fixed lengths for 600mm, 616mm, 635mm and 650mm wide worktops. Cuts worktops up to 40mm thick, with or without anti-drip postformed edge. It can also be used to cut 2 open ended bolt recesses (dog bone style) for 150mm bolts. 10mm plastic pins with tapered shoulders for tight fit provides 3-point pin contact to ensure ease of setting up. The pins are made from ABS plastic for strength.

The Trend CR/DWS/F4/FC is a 4 inch double sided diamond stone with folding handle and monocrystalline diamonds for fast, clean, stock removal which gives excellent sharpening performance. It is double sided for coarse sharpening and fine honing: Coarse 360 grit (nom. 40 microns) and fine 600 grit (nom. 25 microns). The Coarse is ideal for carpentry as it rapidly fixes or restores a damaged edge or blunt tools, including chisels and plane irons. The Fine is ideal for cabinet making for a fine finish and refines the cutting edges of chisels, small knives, etc - achieves a razor edge in seconds. With plastic ABS folding handle, that folds to protects diamond surface and oval holes design to collect and hold metal residue. Ideal for saw blades, chisels, knives, domestic and garden tools. Recommended use with Trend lapping fluid to prevent clogging or rusting and assist in keeping tools clean.

This Faithfull 4 Piece Router Bit Set is for use with kitchen worktop jigs. Tungsten carbide bits suitable for all routers with 1/2in collet. Contains: 3 x 1/2in Shank Straight: 12.7mm x 60mm, 12.7mm x 50mm(x2).1 x 1/4in Shank Flush Trim: 12.7mm x 25.4mm.

The Faithfull 35 Piece Router Bit Set with 1/2in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank Diameter: 12.7mm (1/2in) Contains: 1 x Straight: 3.2 x 14mm.1 x Straight: 6.5 x 20mm.1 x Straight: 10 x 25mm.1 x Straight: 12.7 x 20mm.1 x Straight: 12.7 x 25mm.1 x Straight: 19 x 20mm.1 x Dovetail: 12.7 x 8mm.1 x Dovetail: 15.0 x 12mm.1 x Panel Pilot: 6.5 x 30mm.1 x Guided Flush Trimmer: 10 x 13mm.1 x Guided Flush Trimmer: 10 x 25mm.1 x Guided Flush Trimmer: 12.7 x 12mm.1 x Guided Flush Trimmer: 12.7 x 25mm.1 x Guided Flush Trimmer: 19.1 x 25mm.1 x Mortising Cutter: 12.7 x 13mm.1 x Core Box: R3.2mm, 7 x 6mm.1 x Core Box: R6.3mm, 12.7 x 8mm.1 x Core Box: R6.3mm, 12.7 x 20mm.1 x 90 V-Groove: 12.7 x 10mm.1 x 45 Guided Chamfer: 30 x 14mm.1 x Guided Cove: R6.35mm, 25 x 10mm.1 x Guided Cove: R9.5mm, 30 x 14mm.1 x Guided Rabbeting Cutter: 30 x 6.5mm.1 x Guided Rabbeting Cutter: 30 x 8mm.1 x Guided Rabbeting Cutter: 30 x 10mm.1 x Guided Classical Cove: R8mm, 30 x 15mm.1 x Guided Wave Edge: 30 x 18mm.1 x Guided Beading: R12.7mm, 37 x 20mm.1 x Guided Double Roman: 32 x 14mm.1 x Guided Double Roman: 36 x 19mm.1 x Guided Roman Ogee: 25 x 12mm.1 x Guided Roman Ogee: 36 x 16mm.1 x Guided Rounding: R6.5mm, 25 x 12mm.1 x Guided Rounding: R10mm, 32 x 16mm.1 x Guided Rounding: R12.7mm, 36 x 20mm.

The Faithfull 30 Piece Router Bit Set with 1/4in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 6.3mm (1/4in). Contains: 1 x Straight: 5.0 x 12mm.1 x Straight: 6.0 x 20mm.1 x Straight: 8.0 x 20mm.1 x Straight: 10.0 x 20mm.1 x Straight: 12.0 x 20mm.1 x Straight: 14.0 x 20mm.1 x Straight: 16.0 x 20mm.1 x Straight: 18.0 x 20mm.1 x Straight: 20.0 x 20mm.1 x Dovetail: 12.7 x 13mm.1 x 90 V-Groove: 9.5 x 9mm.1 x 90 V-Groove: 12.7 x 9mm.1 x Core Box: R3.2mm, 6.0 x 6mm.1 x Core Box: R6.3mm, 12.7 x 10mm.1 x Classical Panel: 12.7 x 9mm.1 x Guided Flush Trimmer: 12.7 x 13mm.1 x 25 Guided Chamfer: 16.0 x 9mm.1 x 45 Guided Chamfer: 32.0 x 13mm.1 x Roman Ogee: R4mm, 25.0 x 12mm.1 x Guided Rabbeting Cutter: 28.6 x 13mm.1 x Guided Cove: R6.3mm, 22.0 x 12mm.1 x Guided Cove: R9.5mm, 28.0 x 12mm.1 x Guided Round Over: R3.2mm, 15.0 x 7mm.1 x Guided Round Over: R6.3mm, 22.0 x 12mm.1 x Guided Round Over: R7.9mm, 25.0 x 14mm.1 x Guided Round Over: R9.5mm, 28.0 x 14mm.1 x Guided Beading: R3.2mm, 16.0 x 8mm.1 x Guided Beading: R6.5mm, 22.0 x 12mm.1 x Guided Beading: R7.9mm, 25.0 x 14mm.1 x Guided Beading: R9.5mm, 28.0 x 15mm.

The Faithfull 15 Piece Router Bit Set with 1/2in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 12.7mm (1/2in). Contains: 1 x Straight: 3.2 x 14mm.1 x Straight: 6.5 x 20mm.1 x Straight: 12.7 x 25mm.1 x Straight: 19.0 x 20mm.1 x Dovetail: 12.7 x 8mm.1 x Panel Pilot: 6.5 x 30mm.1 x Guided Flush Trimmer: 12.7 x 12mm.1 x Mortising Cutter: 12.7 x 13mm.1 x Core Box: R3.2mm, 7 x 6mm.1 x 90 V-Groove: 12.7 x 10mm.1 x 45 Guided Chamfer: 30 x 14mm.1 x Guided Cove: R9.5mm, 30 x14mm.1 x Guided Rabbeting Cutter: 30 x 10mm.1 x Guided Roman Ogee: 25 x 12mm.1 x Guided Rounding: R10mm, 32 x 16mm.

The Faithfull 12 Piece Router Bit Set with 1/4in shank. Tungsten Carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 6.3mm (1/4in). Contains: 1 x Dovetail: 12.7 x 13mm.1 x Straight: 6 x 20mm.1 x Straight: 12 x 20mm.1 x Straight: 16 x 20mm.1 x Flush Trim: 12.7 x 13mm.1 x Rounding Over: R7.9mm, 25 x 14mm.1 x Rounding Over: R9.5mm, 28 x 14mm.1 x Roman Ogee: R4mm, 25 x 12mm.1 x Core Box: R6.3mm, 12.7 x 10mm.1 x Cove: R6.3mm, 22 x 12mm.1 x 45 Chamfer: 32 x 13mm.1 x 90 V-Groove: 12.7 x 9mm.