TOUGHCASE+ STACKABLE CASE: Versatile, customisable and connectable accessory set system. Cases lock together.
MODULAR DESIGN: Connectable case allows multiple sets to be stacked and locked together.\nConnects to the small, medium, and large tough cases, and fits inside the TSTAK Caddy.
TSTAK COMPATIBLE: To hold all your accessory sets in one place. \n(Connects via the TSTAK Caddy and the large tough case)
Additional Features
CLEAR LID: Quick and easy bit selection.
INNER DOVETAIL SYSTEM: Bit bars and accessories can be moved around and customised to your preference.
QUICK & EASY BIT REMOVAL / RETENTION: For user convenience.\nBits lock into place to prevent them falling out when not in use.
FLEXTORQ SCREWDRIVER BITS: Impact ready for increased resistance to wear and shock in applications with high torque demands.
TORSION ZONE: Contoured area of the bit flexes with the torque of the impact driver to absorb torque peaks and protect the bit for longer life.
PRECISION MACHINED TIP GEOMETRY: Full fitment in the fastener, reduced cam-out, and longer life.
FULL FIT HEAD: Eliminates wobble and screw head rounding.
LASER ETCHED SIZE ID: Clearly visible bit type and size for quick and easy bit selection.
DEWALT BRANDED ID: High visibility.
IMPACT READY DRIVE GUIDE: With an extending sleeve for improved fastener stability and control.
Includes
(1) PH2 25mm
(1) PZ1 25mm
(2) PZ2 25mm
(1) PZ3 25mm
(1) T20 25mm
(1) T25 25mm
(1) PH1 57mm
(2) PH2 57mm
(1) PH3 57mm
(1) PZ1 57mm
(7) PZ2 25mm
(4) PZ3 25mm
(2) T20 57mm
(2) T25 25mm
(1) Impact Ready Drive Guide
Specifications
Product Width [Metric]
5 cm
Product Height [Metric]
12 cm
Product Length [Metric]
15 cm

​Coloured bits for immediate head recognition.

Each head has a different colour for quick identification.
Small, compact ratchet for jobs in small areas; recommended for general maintenance: automation, assembly lines.

Main feautures:
∙ 5 degree take-up angle
∙ Knurled head for quick mechanism handling
∙ Sealing magnet
∙ Can be used with bits and sockets

Face diameter: 70 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm Stainless steel Conforms to ISO 9001. and DIN EN1083-1 and 2

The FAIWBSI50 Wire Brsh has the following specifications: Face diameter: 50 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.

Suitable for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Type: Pointed end Face diameter: 23/60 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm steel Conforms to ISO 9001. and DIN EN1083-1 and 2 Maximum rpm 20,000.

The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.

The FAIWBSI12 Wire End Brush has the following specifications: Type: Flat End. Face diameter: 12 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel.Conforms to ISO 9001. and DIN EN1083-1 and 2.

The Faithfull crimped brass wire circular brush designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and are designed to operate with power tools up to a maximum of 4,500/min. Type: Circular Diameter: 75 mm Shaft: 6 mm (1/4in) Wire: 0.30 mm crimped brass wire Conforms to ISO 9001 and DIN EN1083-1 and 2.

Diameter: 50mm.

The FAIWBS50 Wire Cup Brush has the following specifications: Face Diameter: 50 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.

The FAIWBS25E Wire End Brush has the following specifications: Type: Flat End. Face Diameter: 25 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.

Diameter: 100mm.

Diameter: 75mm.

The FAIWBS75 Wire Cup Brush has the following specifications: Face Diameter: 75 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.

Milwaukee SHOCKWAVE™ Impact Duty Bits are ideal for heavy-duty impact applications. They also deliver a full system solution that covers all drilling and fastening needs. Made from custom engineered steel, Milwaukee's custom metal formula makes SHOCKWAVE™ bits more resistant to shock from impacting. SHOCK ZONE™ geometry reduces stress at the tip resulting in fewer tip breakages. The combination of the SHOCK ZONE™ design and special heat treatment absorbs impacts and allows the bit to flex with spring-like action. The precision milled tip provides the best fit within the screw head, reducing cam-out and stripping, resulting in an outstanding lifetime. This SHOCKWAVE™ Impact Duty Bit Set is supplied in a compact, convenient storage case. Contains: 2 x 25mm Phillips Bits: PH1 and PH24 x 25mm Pozidriv Bits: PZ1 and PZ2(x3)13 x 25mm TORX Bits: TX10(x2), TX15(x2), TX20(x3), TX25(x2), TX30(x2), TX40 and TX502 x 25mm Hex Bits: 4 and 5mm3 x 25mm Slotted Bits: 0.6 x 4.5, 0.8 x 5.5 and 1.2 x 6.5mm 1 x 50mm Phillips Bit: PH22 x 50mm Pozidriv Bits: PZ1 and PZ25 x 50mm TORX Bits: TX10, TX15, TX20, TX25 and TX30 2 x SHOCKWAVE™ Magnetic Bit Holders: 60 and 152mm 3 x SHOCKWAVE™ 1/4in Hex Drill Bits: 3, 4 and 5mm 2 x SHOCKWAVE™ Magnetic Nut Drivers: 8 and 10mm (48mm Length)

Milwaukee SHOCKWAVE™ Impact Duty Bits are ideal for heavy-duty impact applications. They also deliver a full system solution that covers all drilling and fastening needs. Made from custom engineered steel, Milwaukee's custom metal formula makes SHOCKWAVE™ bits more resistant to shock from impacting. SHOCK ZONE™ geometry reduces stress at the tip resulting in fewer tip breakages. The combination of the SHOCK ZONE™ design and special heat treatment absorbs impacts and allows the bit to flex with spring-like action. The precision milled tip provides the best fit within the screw head, reducing cam-out and stripping, resulting in an outstanding lifetime. This SHOCKWAVE™ Impact Duty Bit Set is supplied in a compact, convenient storage case. Contains: 5 x 25mm Phillips Bits: PH1(x2), PH2(x2) and PH37 x 25mm Pozidriv Bits: PZ1(x2), PZ2(x4) and PZ316 x 25mm TORX Bits: TX10(x3), TX15(x3), TX20(x3), TX25(x3), TX30(x3) and TX402 x 25mm Hex Bits: 4 and 5mm3 x 25mm Slotted Bits: 0.6 x 4.5, 0.8 x 5.5 and 1.2 x 6.5mm 2 x 50mm Phillips Bits: PH1 and PH21 x 50mm Pozidriv Bit: PZ25 x 50mm TORX Bits: TX10, TX15, TX20, TX25 and TX30 1 x 90mm Pozidriv Bit: PZ22 x 90mm TORX Bits: TX20 and TX25 1 x SHOCKWAVE™ Magnetic Bit Holder 60mm 4 x SHOCKWAVE™ 1/4in Hex Drill Bits: 3, 4, 5 and 6mm

Milwaukee SHOCKWAVE™ Impact Duty Bits are ideal for heavy-duty impact applications. They also deliver a full system solution that covers all drilling and fastening needs. Made from custom engineered steel, Milwaukee's custom metal formula makes SHOCKWAVE™ bits more resistant to shock from impacting. SHOCK ZONE™ geometry reduces stress at the tip resulting in fewer tip breakages. The combination of the SHOCK ZONE™ design and special heat treatment absorbs impacts and allows the bit to flex with spring-like action. The precision milled tip provides the best fit within the screw head, reducing cam-out and stripping, resulting in an outstanding lifetime. This SHOCKWAVE™ Impact Duty Bit Set is supplied in a rotating puck style holder. Contains: 3 x 25mm Phillips Bits: PH1 and PH2(x2)5 x 25mm Pozidriv Bits: PZ1, PZ2(x3) and PZ37 x 25mm TORX Bits: TX10, TX15(x2), TX20(x2), TX25 and TX301 x SHOCKWAVE™ Magnetic Bit Holder 60mm

Milwaukee SHOCKWAVE™ Impact Duty Driver Bits are engineered for extreme durability and up to 10x life. Made from proprietary steel and heat-treated to control hardness, the SHOCKWAVE™ Impact Duty™ Driver Bits feature an innovatively designed geometric shock absorption zone to extend life. The forged tip allows for a secure grip and maximum contact eliminating stripping or slipping. Broadly targeting cordless users, the SHOCKWAVE™ Impact Duty accessory line is not only ideal for heavy-duty impact applications, but delivers a full system solution for all the user's drilling and fastening needs. Supplied in a compact storage case. Contains: 4 x 25mm Phillips Bits: PH1, PH2(x2), PH34 x 25mm Pozidriv Bits: PZ1, PZ2(x2), PZ312 x 25mm TORX Bits: TX10(x2), TX15(x2), TX20(x3), 2 x TX25(x2), TX30(x2), TX407 x 25mm Security TORX Bits: TXBO7, TXBO8, TXBO9, TXBO10, TXBO15, TXBO20, TXBO254 x 25mm Hex Bits: 3, 4, 5, 6mm 1 x SHOCKWAVE™ Locking Bit Holder 1/4in x 73mm

Milwaukee SHOCKWAVE™ Impact Duty Driver Bits are engineered for extreme durability and up to 10x life. Made from proprietary steel and heat-treated to control hardness, the SHOCKWAVE Impact Duty™ Driver Bits feature an innovatively designed geometric shock absorption zone to extend life. The forged tip allows for a secure grip and maximum contact eliminating stripping or slipping. Broadly targeting cordless users, the SHOCKWAVE™ Impact Duty accessory line is not only ideal for heavy-duty impact applications, but delivers a full system solution for all the user's drilling and fastening needs. Supplied in a compact, convenient storage case. Contains: 4 x 25mm Phillips Screwdriver Bits: PH1, PH2(x2) and PH35 x 25mm Pozidriv Screwdriver Bits: PZ1, PZ2(x3) and PZ34 x 25mm TORX Screwdriver Bits: TX15, TX20, TX25 and TX30 2 x 50mm Phillips Screwdriver Bits: PH1 and PH24 x 50mm Pozidriv Screwdriver Bits: PZ1, PZ2(x2) and PZ34 x 50mm TORX Screwdriver Bits: TX15, TX20, TX25 and TX30 1 x 60mm Magnetic Bit Holder

The Milwaukee SHOCKWAVE™ Impact Duty Bits are specially designed for use with Impact Drivers, but also deliver a full system solution for all drilling and fastening needs. SHOCKZONE™ Geometry reduces stress at the tip resulting in less tip breakages. The combination of the SHOCKZONE™ design and special heat treatment absorbs impacts and allows the bit to flex with spring like action. The compression forged tip provides the best screw head fit, reducing cam out and stripping, resulting in increased lifetime. Made from custom engineered steel, makes the bits more resistant to shock from impacting.1 x Pack of 10 Milwaukee SHOCKWAVE™ Impact Duty Bits PH2 50mm

The Irwin Impact Screwdriver Bits are specifically designed for use in high torque impact drivers. They are manufactured from heavy-duty, high-grade steel and have a 3 times increased life compared to standard screwdriver bits. Their precision tip geometry delivers superior fitment, reducing stripping and cam-out. The bits are Power Groove designed for compatibility with IRWIN Impact Performance Series™ magnetic screw-hold attachment. This set contains the following:7 x 25mm Phillips Bits: PH1(x2), PH2(x3) and PH3(x2).7 x 25mm Pozidriv Bits: PZ1(x2), PZ2(x3) and PZ3(x2).7 x 25mm TORX Bits: T20(x3), TX25(x2) and T30(x2).5 x 50mm Phillips Bits: PH2.5 x 50mm Pozidriv Bits: PZ2.1 x 3in Bit Holder. Supplied in a moulded ABS resin case.

The Irwin Impact Screwdriver Bits are specifically designed for use in high torque impact drivers. They are manufactured from heavy-duty, high-grade steel and have a 3 times increased life compared to standard screwdriver bits. Their precision tip geometry delivers superior fitment, reducing stripping and cam-out. The bits are Power Groove designed for compatibility with the IRWIN Impact Performance Series™ magnetic screw-hold attachment. This set contains 5 x PZ2 screwdriver bits. Supplied in a moulded ABS resin case.

The Irwin Impact Screwdriver Bits are specifically designed for use in high torque impact drivers. They are manufactured from heavy-duty, high-grade steel and have a 3 times longer life compared to standard screwdriver bits. Their precision tip geometry delivers superior fitment, reducing stripping and cam-out. The bits are Power Groove designed for compatibility with IRWIN Impact Performance Series™ magnetic screw-hold attachment. This set contains 5 x PH2 screwdriver bits.Supplied in a moulded ABS resin case.

The Irwin Impact Screwdriver Bits are specifically designed for use in high torque impact drivers. They are manufactured from heavy-duty, high-grade steel and have a 3 times longer life compared to standard screwdriver bits. Their precision tip geometry delivers superior fitment, reducing stripping and cam-out. The bits are Power Groove designed for compatibility with the IRWIN Impact Performance Series™ magnetic screw-hold attachment. This set contains the following:2 x PZ2 screwdriver bits.2 x PH2 screwdriver bits.1 x T20 screwdriver bit.Supplied in a moulded ABS resin case.

The Irwin Impact Screwdriver Bits are specifically designed for use in high torque impact drivers. They are manufactured from heavy-duty, high-grade steel, and have a 3 times longer life compared to standard screwdriver bits. Their precision tip geometry delivers superior fitment, reducing stripping, and cam-out. The bits are Power Groove designed for compatibility with IRWIN Impact Performance Series magnetic screw-hold attachment. This set contains the following: 2 x PH1 screwdriver bits. 5 x PH2 screwdriver bits. 2 x PH3 screwdriver bits. 1 x Bit holder. Supplied in a moulded ABS resin case.

The Irwin Impact Screwdriver Bits are specifically designed for use in high torque impact drivers. They are manufactured from heavy-duty, high-grade steel, and have a 3 times increased life compared to standard screwdriver bits. Their precision tip geometry delivers superior fitment, reducing stripping, and cam-out. The bits are Power Groove designed for compatibility with the IRWIN Impact Performance Series magnetic screw-hold attachment. This set contains the following:2 x PH2 screwdriver bits.2 x PZ2 screwdriver bits.1 x Magnetic screw hold attachment.Supplied in a moulded ABS resin case.

The ForgeFix 12 Piece Spectre™ Bit Set contains a selection of S2 heat-treated, hardened steel bits. Shock and wear proof, with precision machined tips for reduced cam out and screw head damage. Supplied in a handy carry case with the following: 4 x 25mm Pozidriv Compatible Bits: PZ1, PZ2(x2) and PZ3.7 x 25mm TORX Compatible Bits: TX10, TX15, TX20, TX25, TX27, TX30 and TX40.1 x Bit Holder 60mm.

The ForgeFix 31 Piece Spectre™ Bit Set contains a selection of S2 heat-treated, hardened steel bits. Shock and wear proof, with precision machined tips for reduced cam out and screw head damage. Supplied in a handy carry case with the following: 4 x 25mm Slotted Bits: 3, 4, 5 and 6mm.4 x 25mm Phillips Compatible Bits: PH1, PH2(x2) and PH3.5 x 25mm Pozidriv Compatible Bits: PZ1, PZ2(x3) and PZ3.13 x 25mm TORX Compatible Bits: TX10, TX15, TX20(x3), TX25(x3), TX27, TX30(x3) and TX40.4 x 25mm Hex Bits: 3, 4, 5 and 6mm.1 x Bit Holder 60mm.

This ForgeFix 31 Piece ForgeFast Impact Bit Set contains a selection of ForgeFast TORX Compatible Impact Bits with a 1/4in hex shank. Made from specially engineered hardened steel to extend wear resistance and bit life. The optimal, shock absorbing torsion zone makes them ideal for high torque applications. The high tolerance machined tip reduces cam out and screw head damage. Supplied in a handy carry case with the following: 30 x 25mm TORX Compatible Impact Bits: TX10(x3), TX15(x3), TX20(x6), TX25(x7), T2X7(x2), TX30(x6) and TX40(x3).1 x Bit Holder 60mm. Finish: Black Phosphate

This ForgeFix 12 Piece ForgeFast Impact Bit Set contains a selection of ForgeFast TORX Compatible Impact Bits with a 1/4in hex shank. Made from specially engineered hardened steel to extend wear resistance and bit life. The optimal, shock absorbing torsion zone makes them ideal for high torque applications. The high tolerance machined tip reduces cam out and screw head damage. Supplied in a handy carry case with the following: 11 x 25mm TORX Compatible Impact Bits: TX10, TX15, TX20(x2), TX25(x2), TX27(x2), TX30(x2) and T40.1 x Bit Holder 60mm. Finish: Black Phosphate

This ForgeFix 31 Piece ForgeFast Impact Bit Set contains a selection of ForgeFast Impact Bits with a 1/4in hex shank. Made from specially engineered hardened steel to extend wear resistance and bit life. The optimal, shock absorbing torsion zone makes them ideal for high torque applications. The high tolerance machined tip reduces cam out and screw head damage. Supplied in a handy carry case with the following: 9 x 25mm Pozidriv Compatible Bits: PZ1(x2), PZ2(x5) and PZ3(x2).21 x 25mm TORX Compatible Bits: TX10, TX15(x2), TX20(x5), TX25(x5), TX27, TX30(x5) and TX40(x2).1 x Bit Holder 60mm. Finish: Black Phosphate

This ForgeFix 12 Piece ForgeFast Impact Bit Set contains a selection of ForgeFast Pozidriv Compatible Impact Bits with a 1/4in hex shank. Made from specially engineered hardened steel to extend wear resistance and bit life. The optimal, shock absorbing torsion zone makes them ideal for high torque applications. The high tolerance machined tip reduces cam out and screw head damage. Supplied in a handy carry case with the following: 11 x 25mm Pozidriv Compatible Impact Bits: PZ1(x2), PZ2(x6) and PZ3(x3).1 x Bit Holder 60mm.Finish: Black Phosphate

The Faithfull Security Bit Set contains just about every screwdriver bit most tradesmen will ever need. With sixty Chrome Vanadium steel bits covering all popular drive systems. Supplied in a sturdy plastic storage case. Contains: 6 x Phillips Screwdriver Bits: PH0, PH1, PH2(3) PH3 6 x Pozidriv Screwdriver Bits: PZ0, PZ1, PZ2(3) PZ3 5 x Slotted Screwdriver Bits: 3, 4, 5, 6 7mm 12 x Hex Screwdriver Bits: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7 8mm 13 x Star Screwdriver Bits: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T35 T40 7 x Tamperproof Star Screwdriver Bits: TT10, TT15, TT20, TT25, TT27, TT30 TT35 6 x Hex Security Screwdriver Bits: 2, 2.5, 3, 4, 5 6mm 5 x Spanner Bits: 4 (2), 6, 8 10mm 1 x Magnetic Bit Holder 60mm

This high quality compact bit and socket set provides a useful addition to any toolkit. The 42 piece set contains a mix of the most commonly used screwdriver bits and popular sizes of ¼in hex sockets. This makes it ideal for a very high proportion of fixing activities across a multitude of trade, leisure, hobby and home applications. All of the screwdriver bits are precision manufactured in chrome vanadium S2 steel (desirable for its strength) and are colour coded for easy identification.The sockets have a satin chrome finish and have a ribbed centre section to enable fast hand tightening of nuts and bolts before final tightening via the ratchet handle. Supplied in a handy carry case.Contains: 9 x Pozidriv Bits: PZ1(2), PZ2(5) and PZ3(2).3 x Phillips Bits: PH1, PH2 and PH3.4 x Slotted Bits: 3, 4, 5 and 6mm.7 x Hex Bits - 2, 3, 4, 5, 6, 7 and 8mm.7 x Tamper-proof Bits: TTX10, TTX15, TTX20, TTX25, TTX27, TTX30 and TTX40.8 x 1/4in Square Drive Sockets - 5, 6, 7, 8, 9, 10, 12 and 13mm.1 x Ratchet Bar 90mm with an 8mm ring spanner and adaptor.1 x Socket adaptor 1/4in drive.1 x Quick-Change 60mm Magnetic adaptor.1 x Drill adaptor - 1/4in Hex to 1/4in Square x 50mm.

This Faithfull Screwdriver Bit Set is a useful addition to any toolkit. The 30 screwdriver bits are made from S2 steel and include the most popular types and sizes. Also included is a square drive adaptor and a quick-release holder. Contains:7 x 25mm Pozi Bits: PZ0, PZ1, PZ2 (x4), PZ34 x 25mm Phillips Bits: PH0, PH1, PH2, PH35 x 25mm Slotted Bits: 3, 4, 5, 6, 7mm7 x 25mm Hex Bits: 2, 3, 4, 5, 6, 7, 8mm7 x 25mm TORX (Star) Security Bits: TTX10, TTX15, TTX20, TTX25, TTX27, TTX30, TTX401 x 1/4in Hex to 1/4in Square Drive Adaptor1 x 1/4in Quick-Release Magnetic Ejector Bit Holder Supplied in a sturdy plastic case.

The Faithfull Quick-Change Security Bit Set is a useful addition to any toolkit and contains 24 of the most popular 1/4in hex drive screwdriver bit types, including 18 of the most common security fixings used in industry on appliances and toys. Manufactured from hard-wearing S2 steel, these bits provide a long working life. Used in conjunction with the quick-release magnetic bit holder, they can be swiftly changed without the need to open the drill chuck. The set is supplied in a sturdy impact resistant plastic storage case. Contains: 3 x 25mm Pozidriv Bits: PZ1, PZ2 PZ33 x 25mm Phillips Bits: PH1, PH2 PH35 x 25mm Spanner Bits: 4, 6, 8, 10 12mm7 x 25mm Star Security Bits: T10S, T15S, T20S, T25S, T27S, T30S T40S6 x 25mm Hex Security Bits: 2, 2.5, 3, 4, 5 61 x Quick-Release Magnetic 1/4in Hex Drive

The Faithfull Quick Change Bit Set is a useful addition to any toolkit, containing 24 of the most popular bit types. These screwdriver bits have been manufactured from hard-wearing S2 steel to provide a long working life and, when used in conjunction with the quick-release magnetic bit holder, they can be swiftly changed without the need to open the drill chuck. Supplied in a sturdy plastic storage case. Contains: 8 x 25mm Pozi Screwdriver Bits: PZ1(2), PZ2(3) PZ3(3)3 x 25mm Phillips Screwdriver Bits: PH1, PH2 PH33 x 25mm Slotted Screwdriver Bits: 4, 5.5 6.5mm4 x 25mm Hexagonal Screwdriver Bits: 3, 4, 5 66 x 25mm Star Screwdriver Bits: T10, T15, T20, T25, T30 T401 x 1/4in Quick-Release Magnetic Ejector Bit Holder

This Faithfull Diamond Bit Set contains the six most popular 1/4in drive hex screwdriver bits and a quick release magnetic bit holder. The bits are manufactured from S2 steel and have a coating of minute diamond particles on their tip to bite into the screw head and provide extra grip. This helps to prevent accidental slipping or cam out that can cause damage when screwdriving.The set is supplied in a sturdy, flip down storage case. Contains: 1 x Slotted screwdriver bit: 5mm.6 x Pozidriv screwdriver bits: PZ1 (2), PZ2 (4).2 x Star screwdriver bits: T30.1 x 1/4in Drive stainless steel magnetic bit holder 60mm.

The DEWALT DT7944 31 Piece Screwdriver Bit Set is supplied in a sturdy plastic re-usable storage container. The bits feature a flexible torsion zone which absorbs torque peaks, and reduces breakage. Contains:6 x 25mm Pozidriv Bits: PZ1(x2), PZ2(x3) and PZ3.5 x 25mm Phillips Bits: PH1(x2), PH2(x2) and PH3.3 x 25mm Slotted Bits: 4.5, 5.5 and 6.5mm.12 x 25mm TORX Bits: TX10(x2), TX15(x2), TX20(x2), TX25(x2), TX30(x2) and TX40(x2).4 x 25mm Hex Bits:3, 4(x2) and 5mm.1 x Quick change magnetic bit tip holder.

The DEWALT DT7916; Screwdriver Bit Set includes a selection of tough, professional quality screwdriver bits. The bits have a hardened core for strength and durability with 'Extra Grip' ribs to grip the screw and reduce slippage. Contains: 3 x 25mm Phillips Bits: PH1, PH2 and PH3.3 x 25mm Pozidriv Bits: PZ1, PZ2 and PZ3.4 x 25mm TORX Bits: TX10, TX15, TX20 and TX25.1 x Magnetic Bit Holder.

The DEWALT DEWDT7508 impact adaptor has a hardened core for extra strength and durability and a flexible Torsion Zone absorbs torque peaks and reduces breakage (Torsion bits only). The impact adaptor has the following dimensions:1/2in (12.7mm) x 1/4in (6.35mm)

DEWALT DT7227 Torsion Bits PZ3 x 50mm, pack of 5.They have a hardened core for extra strength and durability. The flexible torsion zone absorbs torque peaks and reduces breakage (Torsion bits only).The design features extra grip ribs gripping the screw and reduce slipping (specific bits only).They are tough quality, professional screwdriver bits. Specifications: Size: PZ3.Length: 50mm.Pack Quantity: 5.

DEWALT DT7226 Torsion Bits, PZ2 x 50mm, in a pack of 5, have a hardened core for extra strength and durability. The flexible torsion zone absorbs torque peaks and reduces breakage (Torsion bits only). The design features extra grip ribs gripping the screw and reduce slipping (specific bits only).They are tough quality, professional screwdriver bits. Specifications: Size: PZ2.Length: 50mm.Pack Quantity: 5.

The DEWALT DT70746T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:4 x 25mm Phillips Bits: PH1, PH2(x2) and PH3.8 x 25mm Pozidriv Bits: PZ1, PZ2(x5) and PZ3(x2).2 x 25mm TORX Bits: TX20 and TX25.3 x 57mm Phillips Bits: PH1 and PH2(x2).13 x 57mm Pozidriv Bits: PZ1, PZ2(x10) and PZ3(x2).3 x 57mm TORX Bits: TX20(x2) and TX25.1 x Aluminium Magnetic Sleeve./p>

The DEWALT DT70745T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:1 x 25mm Phillips Bit: PH2.1 x 25mm Pozidriv Bit: PZ2.10 x 25mm TORX Bits: TX10, TX15(x2), TX20(x4), TX25(x2) and TX30.2 x 25mm TORX Security Bits: TTX20 and TTX25.1 x 57mm Phillips Bit: PH2.1 x 57mm Pozidriv Bit: PZ2.14 x 57mm TORX Bits: TX10(x2), TX15(x3), TX20(x5) and TX25(x4).1 x Magnetic Bit Tip Holder with Torsion Zone.

The DEWALT DT70744T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:2 x 25mm Phillips Bits: PH2(x2).3 x 25mm Pozidriv Bits: PZ2(x2) and PZ3.10 x 25mm TORX Bits: TX10, TX20(x2), TX25(x5) and TX30(x2).1 x 57mm Phillips Bit: PH2.1 x 57mm Pozidriv Bit: PZ2.4 x 57mm TORX Bits: TX15, TX20(x2) and TX25.2 x 89mm TORX Bits: TX20 and TX25.1 x Cleanable Socket Driver 8mm.1 x Compact Magnetic Drive Guide with Torsion Zone.

The DEWALT DT70742T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:7 x 25mm Phillips Bits: PH1, PH2(x5) and PH3.12 x 25mm Pozidriv Bits: PZ1(x2), PZ2(x8) and PZ3(x2).9 x 25mm TORX Bits: TX10(x2), TX15, TX20(x3), TX25(x2) and TX30.1 x 57mm Phillips Bit: PH2.1 x 57mm Pozidriv Bit: PZ2.2 x Socket Drivers: 8 and 10mm.1 x Compact Magnetic Drive Guide with Torsion Zone.

The DEWALT DT70739T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:3 x 25mm Phillips Bits: PH2(x2) and PH3.9 x 25mm Pozidriv Bits: PZ1, PZ2(x7) and PZ3.2 x 25mm TORX Bits: TX20 and TX25.4 x 57mm Phillips Bits: PH1 and PH2(x3).9 x 57mm Pozidriv Bits: PZ1, PZ2(x7) and PZ3.3 x 57mm TORX Bits: TX20, TX25 and TX30.1 x Magnetic Bit Holder with Torsion Zone.

The DEWALT DT70738T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:1 x 25mm Phillips Bit: PH1.1 x 25mm Pozidriv Bit: PZ2.10 x 25mm TORX Bits: TX10, TX15, TX20(x4), TX25(x3) and TX30.2 x 25mm TORX Security Bits: TTX20 and TTX25.1 x 57mm Phillips Bit: PH2.1 x 57mm Pozidriv Bit: PZ2.14 x 57mm TORX Bits: TX10(x2), TX15(x2), TX20(x6) and TX25(x4).1 x Magnetic Bit Holder with Torsion Zone.

The DEWALT DT70737T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:4 x 25mm Phillips Bits: PH1, PH2(x2) and PH3.8 x 25mm Pozidriv Bits: PZ1, PZ2(x6) and PZ3.2 x 25mm TORX Bits: TX20 and TX25.4 x 57mm Phillips Bits: PH1 and PH2(x3).9 x 57mm Pozidriv Bits: PZ1, PZ2(x6) and PZ3(x2).3 x 57mm TORX Bits: TX20(x2) and TX25.1 x Magnetic Bit Holder with Torsion Zone.

The DEWALT DT70734T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:5 x 25mm TORX Bits: TX10, TX15, TX20, TX25 and TX30.2 x 25mm TORX Security Bits: TTX20 and TTX25.1 x 57mm Phillips Bit: PH2.2 x 57mm Pozidriv Bits: PZ2 and PZ3.18 x 57mm TORX Bits: TX10(x2), TX15(x3), TX20(x7), TX25(x5) and TX30.1 x Aluminium Magnetic Sleeve.

The DEWALT DT70733T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. One pair of Tinted Safety Glasses are included. Contains:2 x 25mm Phillips Bits: PH1 and PH3.2 x 25mm Pozidriv Bits: PZ2 and PZ3.24 x 25mm TORX Bits: TX10(x3), TX15(x4), TX20(x8), TX25(x6), TX30(x2) and TX40.1 x 57mm Phillips Bit: PH2.1 x 57mm Pozidriv Bit: PZ2.3 x 57mm TORX Bits: TX15, TX20 and TX25.1 x 89mm TORX Bit: TX20.1 x 1/4in Hex to 1/4in Square Adaptor.1 x 1/4in Hex to 3/8in Square Adaptor.1 x Cleanable Socket Driver 8mm.1 x Bit Tip Holder.

The DEWALT DT70731T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:1 x 25mm Slotted Bit: 4-6mm.5 x 25mm Phillips Bits: PH1, PH2(x3) and PH3.13 x 25mm Pozidriv Bits: PZ1(x2), PZ2(x8) and PZ3(x3).2 x 25mm TORX Bits: TX20 and TX25.1 x 25mm TORX Security Bit: TTX25.2 x 57mm Phillips Bits: PH2(x2).7 x 57mm Pozidriv Bits: PZ1, PZ2(x5) and PZ3.2 x 57mm TORX Bits: TX20 and TX25.1 x 89mm Phillips Bit: PH2.1 x 89mm Pozidriv Bit: PZ2.1 x Compact Magnetic Drive Guide with Torsion Zone.1 x Aluminium Magnetic Sleeve.

The DEWALT DT70730T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:1 x 25mm Slotted Bit: 6mm.8 x 25mm Pozidriv Bits: PZ2(x7) and PZ3.6 x 25mm TORX Bits: TX20(x2) and TX25(x4).2 x 57mm Phillips Bits: PH2(x2).3 x 57mm Pozidriv Bits: PZ2(x2) and PZ3.1 x 89mm Phillips Bit: PH2.1 x 89mm Pozidriv Bit: PZ2.1 x 89mm TORX Bit: TX20.1 x Compact Magnetic Drive Guide with Torsion Zone.1 x Cleanable Socket Driver: 8mm.

The DEWALT DT70561T Impact Torsion Set contains a wide selection of impact rated bits. These CNC accurately designed bits with a torque zone that absorbs the highlights in the torque, allowing optimal bit flexibility for maximum life in more demanding applications. Selected by professional users for maximum fastness and accessibility, with no reduction in performance. The bit holder combines the 10-times-so-powerful MagLock system with ease of use, versatile products like an Aluminium Screw Lock case for use with 50mm screwdrivers, 85mm bit tip holder with removable cover for use with 25mm bits. Supplied in a convenient TOUGH CASE storage box. Contains: 5 x 25mm Phillips Bits: PH1, PH2(x3) and PH3.9 x 25mm Pozidriv Bits: PZ1, PZ2(x7) and PZ3.2 x 25mm TORX Bits: TX20 and TX25.1 x 25mm Slotted Bit: 4-6mm. 6 x 50mm Phillips Bits: PH1(x2) and PH2(x4).8 x 50mm Pozidriv Bits: PZ1(x2) and PZ2(x6).2 x 50mm TORX Bits: TX20 and TX25. 1 x Magnetic Bit Holder.

The DEWALT DT70547T Aluminium Magnetic Screwlock Sleeve has been precisely CNC machined with a torsion zone to absorb peaks in torque. This allows optimum bit flex for maximum life in impact/high torque applications. It has a specially designed bit tip which optimises the fit into the fastener and eliminates wobble and stripped screws. Preferred by professional users for excellent hold, reach, stability and accessibility in all screwdriving applications even the most awkward to reach. The aluminium screw lock sleeve is for use with 50mm torsion bits.

The DEWALT DT70545T contains bits that are specially-designed to have an increased life, the Optimized Torsion Zone allows the bit to flex rather than break, even when used in extreme applications. The contoured area of the tip flexes to absorb the torque of the impact driver. Contains:5 x 25mm Pozidriv Bits: PZ1, PZ2(x3) and PZ3.3 x 25mm Phillips Bits: PH1, PH2 and PH3.16 x 50mm Pozidriv Bits: PZ1(x3) and PZ2(x13).7 x 50mm Phillips Bits: PH1(x2) and PH2(x5).2 x 50mm TORX Bits: TX20 and TX25.1 x Magnetic Sleeve.

The DEWALT DT70512T Impact Torsion Screwdriver Bit Set contains a selection of high performance impact torsion bits that have been designed for use with impact drivers. Preferred by professional users for maximum hold, tight access and no run out. The CNC precisely machined bits have a torsion zone that absorbs peaks in torque allowing optimum bit flex for maximum life in tough Impact or High Torque industrial applications. The bit holder features a magnetic screw lock system that is 10x stronger than the average holder, with an aluminium screw lock sleeve for use with torsion bits 50mm and above. Plus an 85mm bit tip holder with removable sleeve for use with 25mm bits and a compact rapid load for use with bits 25mm and above. Both provide excellent hold, reach, stability and accessibility in all screwdriving applications, even the most awkward to reach. Supplied in a compact bit case to safely store screwdriver bits and long and short magnetic screw guides. Contains:3 x 25mm Phillips Bits: PH1, PH2 and PH3.5 x 25mm Pozidriv Bits: PZ1, PZ2(x3) and PZ3.1 x 25mm Slotted Bit: SL6.3 x 25mm TORX Bits: TX20, TX25 and TX30.1 x Compact Magnetic Drive Guide.1 x Long Magnetic Drive Guide.

The Faithfull set of 3 hex to square drive adaptors. It converts any 1/4in Hex Drive or Drill Chuck to accommodate 1/4, 3/8, or 1/2in Drive sockets. Contains:1/4, 3/8 and 1/2in Square Drive.

The Trend PH/JIG/BS Single Pocket Hole Jig is for fast and accurate joining of solid timber and plywood giving strong instant joints in single or multiple fixing positions. It can help to build cabinets, furniture and small joinery projects with ease. The hardened drilling sleeves provide accurate, consistent pockets. There is also a handy built-in drill depth gauge that can be reversed for new or repair work. Works with timber thicknesses from 12mm to 38mm. Portable and adaptable. Supplied with: 1 x Pack of Assorted Screws, 1 x 150mm Square Drive Bit and 1 x HSS Drill Bit with Collar.

This pack contains 4 spare location pins, which are suitable for the KWJ700 and KWJ900 worktop jigs. Made from ABS plastic for strength.

Tradesman ALL IN ONE work top jig for up to 900 mm worktops. Hard wearing solid laminate 12 mm thick jig that cuts both parts of the joint in 15-minutes including setting up and left hand and right hand corners, 400 mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100 mm radius corner, 40 mm radius corner, 35 mm kitchen door hole and 3/4 inch BSP hole for mixer taps. It covers fixed lengths for 400 mm, 500 mm, 550 mm, 600 mm, 616 mm, 650 mm, 700 mm and 900 mm wide worktops and can cuts up to 40 mm thick worktops with or without anti-drip postformed edge. Three open-ended bolt recesses (dog bone style) for 150 mm bolts. Engraved lines for short 65 mm bolts and worktop cross-cut. 10 mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Engraved markings for identification of pin holes. Specification:Length: 1185 mm. Width: 390 mm. Thickness: 12 mm. Weight: 7.7 Kg. End cut: 45 degrees. Corner radius: 40 mm. Corner radius: 100 mm. Corner radius: 400 mm. Corner mitre joint: 45 degrees.

Trend Kitchen Worktop Jig for worktops up to 650mm. Made from hard-wearing, CNC machined Compact Grade High-Pressure Laminate, 12mm thick. Cuts both parts of the joint in 15 minutes, including setting up. For cutting: left and right-hand corners, 400mm radius peninsular joint and 35mm kitchen door hole. With fixed lengths for 600mm, 616mm, 635mm and 650mm wide worktops. Cuts worktops up to 40mm thick, with or without anti-drip postformed edge. It can also be used to cut 2 open ended bolt recesses (dog bone style) for 150mm bolts. 10mm plastic pins with tapered shoulders for tight fit provides 3-point pin contact to ensure ease of setting up. The pins are made from ABS plastic for strength.

The Trend CR/DWS/F4/FC is a 4 inch double sided diamond stone with folding handle and monocrystalline diamonds for fast, clean, stock removal which gives excellent sharpening performance. It is double sided for coarse sharpening and fine honing: Coarse 360 grit (nom. 40 microns) and fine 600 grit (nom. 25 microns). The Coarse is ideal for carpentry as it rapidly fixes or restores a damaged edge or blunt tools, including chisels and plane irons. The Fine is ideal for cabinet making for a fine finish and refines the cutting edges of chisels, small knives, etc - achieves a razor edge in seconds. With plastic ABS folding handle, that folds to protects diamond surface and oval holes design to collect and hold metal residue. Ideal for saw blades, chisels, knives, domestic and garden tools. Recommended use with Trend lapping fluid to prevent clogging or rusting and assist in keeping tools clean.

This Faithfull 4 Piece Router Bit Set is for use with kitchen worktop jigs. Tungsten carbide bits suitable for all routers with 1/2in collet. Contains: 3 x 1/2in Shank Straight: 12.7mm x 60mm, 12.7mm x 50mm(x2).1 x 1/4in Shank Flush Trim: 12.7mm x 25.4mm.

The Faithfull 35 Piece Router Bit Set with 1/2in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank Diameter: 12.7mm (1/2in) Contains: 1 x Straight: 3.2 x 14mm.1 x Straight: 6.5 x 20mm.1 x Straight: 10 x 25mm.1 x Straight: 12.7 x 20mm.1 x Straight: 12.7 x 25mm.1 x Straight: 19 x 20mm.1 x Dovetail: 12.7 x 8mm.1 x Dovetail: 15.0 x 12mm.1 x Panel Pilot: 6.5 x 30mm.1 x Guided Flush Trimmer: 10 x 13mm.1 x Guided Flush Trimmer: 10 x 25mm.1 x Guided Flush Trimmer: 12.7 x 12mm.1 x Guided Flush Trimmer: 12.7 x 25mm.1 x Guided Flush Trimmer: 19.1 x 25mm.1 x Mortising Cutter: 12.7 x 13mm.1 x Core Box: R3.2mm, 7 x 6mm.1 x Core Box: R6.3mm, 12.7 x 8mm.1 x Core Box: R6.3mm, 12.7 x 20mm.1 x 90 V-Groove: 12.7 x 10mm.1 x 45 Guided Chamfer: 30 x 14mm.1 x Guided Cove: R6.35mm, 25 x 10mm.1 x Guided Cove: R9.5mm, 30 x 14mm.1 x Guided Rabbeting Cutter: 30 x 6.5mm.1 x Guided Rabbeting Cutter: 30 x 8mm.1 x Guided Rabbeting Cutter: 30 x 10mm.1 x Guided Classical Cove: R8mm, 30 x 15mm.1 x Guided Wave Edge: 30 x 18mm.1 x Guided Beading: R12.7mm, 37 x 20mm.1 x Guided Double Roman: 32 x 14mm.1 x Guided Double Roman: 36 x 19mm.1 x Guided Roman Ogee: 25 x 12mm.1 x Guided Roman Ogee: 36 x 16mm.1 x Guided Rounding: R6.5mm, 25 x 12mm.1 x Guided Rounding: R10mm, 32 x 16mm.1 x Guided Rounding: R12.7mm, 36 x 20mm.

The Faithfull 30 Piece Router Bit Set with 1/4in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 6.3mm (1/4in). Contains: 1 x Straight: 5.0 x 12mm.1 x Straight: 6.0 x 20mm.1 x Straight: 8.0 x 20mm.1 x Straight: 10.0 x 20mm.1 x Straight: 12.0 x 20mm.1 x Straight: 14.0 x 20mm.1 x Straight: 16.0 x 20mm.1 x Straight: 18.0 x 20mm.1 x Straight: 20.0 x 20mm.1 x Dovetail: 12.7 x 13mm.1 x 90 V-Groove: 9.5 x 9mm.1 x 90 V-Groove: 12.7 x 9mm.1 x Core Box: R3.2mm, 6.0 x 6mm.1 x Core Box: R6.3mm, 12.7 x 10mm.1 x Classical Panel: 12.7 x 9mm.1 x Guided Flush Trimmer: 12.7 x 13mm.1 x 25 Guided Chamfer: 16.0 x 9mm.1 x 45 Guided Chamfer: 32.0 x 13mm.1 x Roman Ogee: R4mm, 25.0 x 12mm.1 x Guided Rabbeting Cutter: 28.6 x 13mm.1 x Guided Cove: R6.3mm, 22.0 x 12mm.1 x Guided Cove: R9.5mm, 28.0 x 12mm.1 x Guided Round Over: R3.2mm, 15.0 x 7mm.1 x Guided Round Over: R6.3mm, 22.0 x 12mm.1 x Guided Round Over: R7.9mm, 25.0 x 14mm.1 x Guided Round Over: R9.5mm, 28.0 x 14mm.1 x Guided Beading: R3.2mm, 16.0 x 8mm.1 x Guided Beading: R6.5mm, 22.0 x 12mm.1 x Guided Beading: R7.9mm, 25.0 x 14mm.1 x Guided Beading: R9.5mm, 28.0 x 15mm.

The Faithfull 15 Piece Router Bit Set with 1/2in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 12.7mm (1/2in). Contains: 1 x Straight: 3.2 x 14mm.1 x Straight: 6.5 x 20mm.1 x Straight: 12.7 x 25mm.1 x Straight: 19.0 x 20mm.1 x Dovetail: 12.7 x 8mm.1 x Panel Pilot: 6.5 x 30mm.1 x Guided Flush Trimmer: 12.7 x 12mm.1 x Mortising Cutter: 12.7 x 13mm.1 x Core Box: R3.2mm, 7 x 6mm.1 x 90 V-Groove: 12.7 x 10mm.1 x 45 Guided Chamfer: 30 x 14mm.1 x Guided Cove: R9.5mm, 30 x14mm.1 x Guided Rabbeting Cutter: 30 x 10mm.1 x Guided Roman Ogee: 25 x 12mm.1 x Guided Rounding: R10mm, 32 x 16mm.

The Faithfull 12 Piece Router Bit Set with 1/4in shank. Tungsten Carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 6.3mm (1/4in). Contains: 1 x Dovetail: 12.7 x 13mm.1 x Straight: 6 x 20mm.1 x Straight: 12 x 20mm.1 x Straight: 16 x 20mm.1 x Flush Trim: 12.7 x 13mm.1 x Rounding Over: R7.9mm, 25 x 14mm.1 x Rounding Over: R9.5mm, 28 x 14mm.1 x Roman Ogee: R4mm, 25 x 12mm.1 x Core Box: R6.3mm, 12.7 x 10mm.1 x Cove: R6.3mm, 22 x 12mm.1 x 45 Chamfer: 32 x 13mm.1 x 90 V-Groove: 12.7 x 9mm.

S8

These Rohm 4MT Series precision machined and ground Morse Taper 6JT Arbors, for mechanism performance, are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, are used on lathes and pillar drills for mounting 3 jaw chucks.Made from high-quality tool steel. Specifications: Size/Type: 4MT/6JT.

These Rohm 4MT precision machined and ground Morse Taper 3JT Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 4MT/3JT.

These Rohm 3MT Series precision machined and ground Morse Taper 6JT Arbors are for mechanism performance, and are ideal for use with custom tool and work holder designs. For use adapting Jacobs taper mounted chucks to morse taper spindles, and used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 3MT/6JT.

These Rohm 3MT precision machined and ground Morse Taper 33T Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks.Made from high-quality tool steel. Specifications: Size: 3MT/33T.

These Rohm 2MT precision machined and ground Morse Taper 6JT Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 2MT/6JT.

These Rohm precision machined and ground Morse Taper Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 3MT/33JT.

These Rohm 2MT precision machined and ground Morse Taper 3JT Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks.Made from high-quality tool steel. Specifications: Size/Type: 2MT/3JT.

These Rohm 2MT precision machined and ground Morse Taper 2JT Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks.Made from high-quality tool steel. Specifications: Size/Type: 2MT/2JT.

These Rohm 2MT precision machined and ground Morse Taper 1JT Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 2MT/1JT.

These Rohm 1MT Series precision machined and ground Morse Taper 1JT Arbors, are for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 1MT/1JT.

Quick change angle attachment for drilling and screwdriving in the narrowest of spaces and up to forces of 100Nm. Ideal for drilling at right angles through joists for laying pipe work. Attachment rotates 360?. For use with BS/SB18 LTX Quick and BS/SB18 LTX Quick brushless models.

The DEWALT DWE74912 Scissor Leg Stand is for use with the DWE7491 table saw. It enables easy transportation, and then set up on the actual jobsite.Specification: Weight: 6.8kg. (15lbs).

The DEWALT Impact Torsion Screwdriving Set features CNC precisely machined bits with a torsion zone to absorb peaks in torque. The set allows optimum bit flex for maximum life in Impact/High Torque applications.The 15 piece set has a longer life, faster, more accurate screw driving thanks to a specially designed bit tip which optimises the fit into the fastener and eliminates wobble and stripped screws.Preferred by professional users for maximum hold, tight access, and no run out.Supplied in a Magnetic Tough Case. Contains:3 x 25mm Phillips Bits: PH1, PH2, PH3.4 x 25mm Pozidriv Bits: PZ1, PZ2(2), PZ3.2 x 25mm TORX Bits: T20, T25.2 x 50mm Phillips Bits: PH2, PH3.3 x Socket Drivers: 7mm, 8mm, 10mm.1 x Magnetic Bit Tip Holder.

The DEWALT DT71517T-QZ Right Angle Torsion Drill Attachment is durable and has a compact design that allows it to fit in tight spaces where work is difficult to perform and is perfect for driving screws and drilling holes at awkward angles. It is ideal for cordless drills and accepts standard 1/4in hex shank accessories. Torsion bits have a Flexible Torsion Zone that absorbs torque peaks and reduces breakage. Includes the following: 3 x 25mm Pozidriv Bits: PZ2.2 x 25mm Phillips Bits: PH2.4 x 25mm Torx Bits: T10, T15, T20 T25.

The DEWALT DE7400-XJ Rolling Table Saw Stand is fitted with large heavy-duty wheels designed to easily roll over steps, kerbs, and jobsite debris. The folding legs are fitted with quick release levers which retract under the stand in a few seconds for easy and quick transport.The stand is made from lightweight aluminium, which improves the portability.The heavy-duty kick stand allows it to balance upright for mobility and storage, and there is also a retractable soft grip handle that slides out, allowing the user to pull the saw behind him comfortably.The design allows portability when the table saw is attached to the stand, increasing productivity. Perfect for correct height and stability, for all applications, as well as ripping skirting, sheet material and roofing timbers on site.Supplied with universal brackets which attach to most table saws.

The DEWALT DE7260 Mitre Saw Folding Rolling Stand has an easily adjustable mounting system that simplifies tool attachment and ensures universal compatibility. It has 2 height settings and is fitted with wide supports that extend up to 2.4m, with a capacity up to 135kg, providing excellent material support. The stand is fitted with pneumatic assists for easy set up and collapse, XL rubber wheels for improved jobsite mobility and no punctures and a kickstand for vertical storage. This compact vertical storage option provides improved mobility and ease of transport. Specification: Max. Load: 135kgMax. Extension: 2.4m

DEWALT DE7033 Heavy-Duty Short Beam Leg Stand accommodates all DEWALT mitre saws. It has a lightweight aluminium construction that provides portability in and around the jobsite (only 14kg), the 1.1 metre beam extends to support up to 2.5 metres for use with large workpieces and the beam can support up to 227kg. Work stops can be converted into end stops for repetitive cutting to length. Integral folding legs avoid unnecessary assembly and the integrated carry handle provides ease of transportation. Applications include: cutting to length, roofing timbers, all material support requirements, and large workpiece support.Comes with: 2 x work stops / support and mitre saw brackets.

Senco DuraSpin Collated Screws for Fermacell board to wood applications. Phillips No.2 drive, black phosphate finish, coarse thread, small head with countersink nibs. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines. Size: 3.9 x 30mm.

1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 64mm

1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 57mm

1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 50mm

1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 45mm

1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 38mm

1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 32mm

1 x Box of 5000 DEWALT 16 Gauge Galvanised Finish Nails 25mm

Trend BSC/20/1000 Biscuits Size: No.20 (60 x 23 x 4mm).Pack Size: 1000.

Trend BSC/20/100 Biscuits Size: No.20 (60 x 23 x 4mm).Pack Size: 100.

Trend BSC/10/1000 Biscuits Size: No.10 (53 x 19 x 4mm).Pack Size: 1000.

Trend BSC/10/100 Biscuits Size: No.10 (53 x 19 x 4mm).Pack Size: 100.

Trend BSC/0/100 Biscuits Size: No.0 (47.5 x 15.5 x 4 mm).Pack Size: 100.