SPECIFICATIONS
Torque range 30 – 360Nm, 265 -3186 lb-in, 22.12 - 265.5 lb-ft or 3.05 - 36.7 kg-m
Large LCD digital display shows selectable units Nm, lb-in, lb-ft or kg-m
Target torque value preset & audible alarm
Low battery indicator
Calibrated to BS EN ISO6789
Weight 0.3kg

Lightweight and portable design
Turbo fan cooling for greater efficiency
Adjustable power and speed dials for accurate welding control
Supplied with 2 Extra 0.9mm tips and 1x hammer/brush
CONFORMS TO BS EN 60974
Product Weight: 5.85kg
Thermal overload protection

SPECIFICATIONS
20” (508mm)
120W, 230V motor with 3 speed control
Vertical tilting adjustment for direction of air flow
Tough ABS construction with integral carry handle
Dimensions (DXWXH) 250x600x600mm
Weight 3.7kg

SPECIFICATIONS
Comfortable foam padded seat
Height adjustable seat from 380mm to 490mm
Storage tray for easy access to tools & parts
Seat swivels through 360°
Weight 7Kg

Product description
Car maintenance is made a whole lot easier with the aid of a mechanics seat. Sit in comfort when undertaking a whole host of automotive repair jobs. This height adjustable unit features five easy rolling castors for manoeuvrability and easy to reach tool storage tray.

Technical specification
No. of castors
5
Dimensions LWH
380x380 (max. 490)mm
Type
Seat
Weight
7kg
Packaged Weight
6.15kg

SPECIFICATIONS
Welding capacity on mild steel 1mm + 1mm
Input power supply 230V, 50hz
Max. absorbed power 6kW
Synchronous electronic timer - spot welding time adjustable from 0.1 to 1.2 seconds
Arm pressure adjustable from 40kg to 120kg (with 120mm long arm)
A standard 13 Amp plug MUST NOT be used with this machine. Connect the mains lead, through a suitably fused isolator switch, to a 230 Volt (50Hz) electrical supply.

Product description
This portable resistance welding machine, featuring electronic spot welding time control, is suitable for many spot welding applications including vehicle body repairs, general metal fabrication and light industrial use. Robust and simple to operate, the CSW6T delivers consistent results every time enabling the fast and efficient fusion of metal sheet.

Technical specification
Max. Welding Thickness (mm)
1+1
Input Voltage
230V
Rated Power
1.2kW
Power Supply
Requires Hard Wiring
Max. Absorbed Power
6kW
Dimensions
440x110x185mm
Packaged Weight
10.68kg

SPECIFICATIONS
3HP, 230V 1ph motor
2-pole (3000rpm) no load shaft speed, 24mm key way drive shaft
Double shielded self lubricating radial ball bearings on drive
Stator windings have class F insulations & are class H resin coated
Manufactured to the latest electrical & mechanical standards inc. IEC34-1, BS5000, CEN HD231 & IEC72
Motor must be wired through a suitable starter (10 - 16 amps) with overload protection
Technical specification
Size
3HP
No. of Poles
2
Shaft Speed
3000rpm
Frame Size
90 S
Shaft Dia.
24mm
Starter Required Amps
10-16
Packaged Weight
16.35kg

Low noise level (62dB) equivalent to a conversation
8 Bar (116psi) maximum working pressure
1100W, 230V direct drive motor with thermal overload protection
50-litre air receiver
7.0cfm (200L/min) air displacement from 1.5HP motor
Oil free
Twin Outlets (1/4" BSP male thread connector)
Adjustable airflow regulator
Automatic On/Off pressure switch