SPECIFICATIONS
Torque range 30 – 360Nm, 265 -3186 lb-in, 22.12 - 265.5 lb-ft or 3.05 - 36.7 kg-m
Large LCD digital display shows selectable units Nm, lb-in, lb-ft or kg-m
Target torque value preset & audible alarm
Low battery indicator
Calibrated to BS EN ISO6789
Weight 0.3kg

Features:
• 6 drawers (588x367 mm) with ball bearing slides
• Drawer bases protected by foamed rubber mats
• Front centralized lock
• With vertically adjustable feet
• Each drawer can accommodate up to 4 EVA foam or ABS thermoformed trays
 65,5 kg

SPECIFICATIONS
Comfortable foam padded seat
Height adjustable seat from 380mm to 490mm
Storage tray for easy access to tools & parts
Seat swivels through 360°
Weight 7Kg

Product description
Car maintenance is made a whole lot easier with the aid of a mechanics seat. Sit in comfort when undertaking a whole host of automotive repair jobs. This height adjustable unit features five easy rolling castors for manoeuvrability and easy to reach tool storage tray.

Technical specification
No. of castors
5
Dimensions LWH
380x380 (max. 490)mm
Type
Seat
Weight
7kg
Packaged Weight
6.15kg

SPECIFICATIONS
Welding capacity on mild steel 1mm + 1mm
Input power supply 230V, 50hz
Max. absorbed power 6kW
Synchronous electronic timer - spot welding time adjustable from 0.1 to 1.2 seconds
Arm pressure adjustable from 40kg to 120kg (with 120mm long arm)
A standard 13 Amp plug MUST NOT be used with this machine. Connect the mains lead, through a suitably fused isolator switch, to a 230 Volt (50Hz) electrical supply.

Product description
This portable resistance welding machine, featuring electronic spot welding time control, is suitable for many spot welding applications including vehicle body repairs, general metal fabrication and light industrial use. Robust and simple to operate, the CSW6T delivers consistent results every time enabling the fast and efficient fusion of metal sheet.

Technical specification
Max. Welding Thickness (mm)
1+1
Input Voltage
230V
Rated Power
1.2kW
Power Supply
Requires Hard Wiring
Max. Absorbed Power
6kW
Dimensions
440x110x185mm
Packaged Weight
10.68kg

ELIMINATES THE INTRODUCTION OF BUBBLES AND AIRLOCKS - Into the cooling system and dramatically reduces system filling time.
TIME SAVING - No more time-consuming cooling system bleeding and messy spills to clean up.
AUTOMATICALLY - Conducts system leak test.
SIMPLE OPERATION - Requires a workshop air supply and does not require a fiddly interchange of vacuum and fluid hoses.
EASY REFILL - By attaching the filler hose and opening the valve allowing your premixed coolant to flow into the system.
FUNNEL WITH SHUT-OFF VALVE – Allowing the system to be filled manually if required, the built-in shut-off valve helps prevent airlocks.
SUPPLIED - With a 1.25m filler hose, six reservoir adaptors 31, 35, 40, 42, 45mm, a cone adaptor and a storage case.

Air Inlet Size:
1/4"BSP

Fluid Hose Length:
1.25m

Nett Weight:
1.06kg

EASY TO USE - One-person operation using standard workshop air supply.
LARGE 2L CAPACITY BOTTLE – Ideal for bleeding or full replacement of the brake fluid in the brake system.
SIMPLE - Does not require specialised brake reservoir caps.
EXTRACTION PIPE INCLUDED - Enabling easy brake fluid extraction directly from the master cylinder avoiding any spills.
UNIVERSAL DESIGN - Designed for most brake bleed nipples and ABS systems on cars, vans and motorcycles.

Air Consumption:
180L/min

Inlet Size:
1/4"BSP

Maximum Air Supply:
120psi

Nett Weight:
0.552kg

Tank Capacity:
2L

ROBUST – Durable, lightweight tubular steel design perfect for keeping longer water hoses neat and tidy.
LARGE CAPACITY - Can hold up to 120m of Ø13mm standard water hose or 50m of Ø19mm H/D hose.
EASY TO MANOEUVRE - Fitted with easy-rolling 10" puncture proof PU wheels and solid axle for rough terrain.
LEADER HOSE - Supplied with 1.8m leader hose with 3/4"BSP brass fittings.
HOT AND COLD WATER HOSE INCLUDED - 30m High flow Ø19mm hexagonal hose can handle hot water up to 90°C and has a high pressure rating of 500psi, ideal for livestock and farming applications.
ANTI-KINK - Octagonal shaped hose helps reduce kinking and increase abrasion resistance.

Hose Size (ID):
Ø19mm

Length:
30m

Nett Weight:
29.9kg

Master timing tool kit for VAG vehicles.
Covers a wide range of petrol and diesel engines.
Suitable for popular VAG vehicles from 1995 to present.
Applications include Gen III petrol engines featuring single or twin variable valve timing.
Supplied in two high quality storage foams suitable for toolbox drawers.
Foam size: 560 x 390 x 45mm.

Applications:

Audi:
A1 (10-18), A1 Sportback (10-18), A2 (00-01), A3 (96-18), A3 Sportback (03-18), A3 Cabriolet (08-18), A4 (95-16), A4 Quattro (90-16), A4 Cabriolet (06-09), A4 Allroad (07-16), A5 (08-17), A5 Sportback (09-17), A5 Coupe (09-17), A5 Cabriolet (09-17), A6 (97-18), A6 Quattro (01-18), A7 (15-18), Q2 (16-18), Q3 (11-21), Q5 (08-17), S3 (99-18), TT (99-18)

Seat:
Alhambra (00-18), Altea (04-15), Altea XL (04-15), Arosa (99-05), Ateca (17-18), Cordoba (96-12), Exeo (09-16), Ibiza (99-17), Leon (99-20), Leon ST (13-20), Mii (12-20), Toledo (96-18)

Skoda:
Fabia (99-10), Fabia II (07-15), Fabia III (14-18), Kodiaq, (17-21), Octavia (96-10), Octavia II (04-15), Octavia III (10-18), Praktik (07-15), Rapid (12-18), Rapid Spaceback (12-18), Roomster (06-15), Superb (02-08), Superb II (08-15), Superb III (15-19), Yeti (09-17), Yeti Outdoor (13-17)

Volkswagen:
Amarok (10-16), Areton (17-19), Beetle (00-15), Beetle CC (12-15), Bora (00-06), Caddy (98-21), Caddy Maxi (00-15), CC (10-17), Citigo (12-19), Crafter (11-17), EOS (07-15), Fox (05-12), Golf (96-16), Golf Alltrack (14-17), Golf (11-15), Golf III (95-04), Golf III Cabriolet (95-98), Golf IV (97-05), Golf IV Cabriolet (98-04), Golf Plus (05-14), Golf V (03-08), Golf VI (08-13), Golf VI Cabriolet (11-15), Golf VI (08-19), Golf VI Plus (09-14), Golf VI Alltrack (14-17), Jetta (05-18), Lupo (98-05), Passat (95-19), Passat Allroad (12-15), Passat Alltrack (12-18), Passat CC (08-12), Polo (95-18), Polo Classic (95-02), Scirocco (08-17), Sharan (96-19), Sportsvan (14-17), Tiguan (07-15), Touran (03-17), Toureg (10-15), Transporter (92-18), UP! (12-20), Vento (96-98)

Associated Tool(s):

VSE4243

Engine Code(s):

1.0:
CHYA, CHYB, CPGA

1.2:
AWY, AZQ, BBM, BMD, BME, BXV, BZG, CBZA, CBZB, CBZC, CEVA, CGPA, CGPB, CGPC, CHFA, CHFB, CJZA, CJZB, CJZC, CJZD

1.2D:
ANY, AYZ, CFWA

1.4:
AFK, AHW, AKQ, APE, AQQ, ARR, AUA, AUB, AXP, AXU, BBY, BBZ, BCA, BKG, BKY, BLG, BLN, BMY, BUD, BWK, BXW, CAVA, CAVB, CAVC, CAVD, CAVE, CAVF, CAVG, CAXA, CAXC, CDGA, CGGA, CGGB, CHPA, CHPB, CKMA, CNVA, CMAA, CMBA, CPTA, CPVA, CPVB, CMSB, CPWA, CRJA, CTHA, CTHB, CTHC, CTHD, CTHE, CTHF, CTHG, CTJC, CTKA, CUKB, CUKC

1.4D:
AMF, ATL, BAY, BHC, BMS, BNM, BNV, BWB, CUSA, CUSB, CUTA

1.6:
1F, AEH, AFT, AKL, AKS, ALZ, APF, ARC, AUR, AUS, AVU, AZD, BAD, BAG, BCB, BFQ, BFS, BGU, BLF, BLP BSE, BSF, BTS, CLNA, CLRA, CNKA

1.6D:
AYD, AYY, CAYA, CAYB, CAYC, CAYD, CAYE, CLHA, CLHB, CRKA, CRKB

1.7D:

AKU

1.8:
AEB, AGN, AGU, AJL, AJP, AJQ, AMK, AMU, ANB, APG, APP, APU, APX, APY, AQA, ARX, ARY, ARZ, AUM, AUQ, AWC, AWU, AYP, BAM, BFV, BVP, BVR, BYB, BYT, BZB, CABA, CABB, CABD, CDAA, CDAB, CDHA, CDHB, CGYA, CJEB, CJED, CJEE, CJSA, CJSB, CJSC, CYGA, DAJA, DAJB

1.9D:
1X, 1Y, ABL, AFN, AGR, AHF, AJM, ALH, ANU, ARL, ASV, ASZ, ATD, AUY, AVB, AVF, AVG, AVQ, AWT, AWX, AXB, AXC, AXR, BJB, BKC, BKE, BLS, BLT, BMT, BPX, BPZ, BRB, BRM, BRR, BRS, BRU, BSU, BSV, BSW, BTB, BUK, BVK, BXE, BXF, BXJ

2.0:
AAC, APK, AQY, ATM, ATU, AWA, AWF, AWG, AXA, AXW, AXX, AZG, AZH, AZJ, AZM, BEH, BGB, BHD, BHZ, BLR, BLX, BLY, BMB, BPG, BPJ, BPY, BUL, BE, BVX, BVY, BVZ, BWA, BWA1, BWE, BWJ, BWT, BYD, BYK, BZC, CAWA, CAWB, CBFA, CCTA, CCZA, CCZB, CCZC, CCZD, CDBD, CDLA, CDLB, CDLC, CDLD, CDLK CDMA, CFPA, CHHA, CHHB, CPLA, CRUA, CUAA, CUNS, CUUA, , DNUE, DKTA, DJHC, DJHA, DEDA, CZPA, CZPB, CZPC, CPPA, CULA, CULC, CJSC, DAJA, DAJB, CJKA, CJKB, CJXA, CJXB, CJXC, CJXD, CJXE, CJXG

2.0D:
AZV, BKD, BKQ, BMM, BMN, BNA, BPW, BRA, BRC, BRD, BRE, BRF, BVA, BVF, BVG, BUY, BLB, BRT, BVH, BEW, BDJ, BSS, BST, BMP, BDK, BGW, BHW, BKP, BMA BMR, BUZ, BVE, BWV, CAGA, CAGB, CAGC, CAHA, CAHB, CBAA, CBAB, CBBB, CBEA, CEGA, CFHC, CFJA, CFFA, CFFB, CFFE, CFGB, CFGC, CFGD, CLCB, CFHA, CFHB, CFHD, CGLA, CGLB, CGLC, CGLD, CGLE, CJCA, CJCB, CJCC, CJCD, CKFB, CKFC, CRMB, CRVA, CRVC, CUPA, CRKB, CLCA, CFHF, CRCB, , CFHJ, CDBA, CDCA, CNFA, CNFB, CNEA, CSHA, CUVC, CLJA, CMGB, CSUE, CFHE, DFMA, CFFD, CKTB, CKUB, CKUC, CKTC, CBDA, CBDC, CJAA, CMEA, CMFA, CMFB, CNHA, CNHC, CUNA, CRFA, CRFC, CRLB, CRBD, CRBC, CRLC, CSUA, CBAC, CLLA, CUVA, DFLA DFLD, CBBA, CFCA, CAAC, CAAA, CAAB, CAAD, CAAE, CCHA, CCHB, DFCA

Nett Weight:
13kg

OEM Tool(s):
VAG:

T10352, T10352C, T10355, T10368, T20208, T40011, T10492, T10409, T10490, T10051, T40001, T10494, T10504, T10499, T10476, T10477, T10475, T10414, T10016, T10115, T20102, T10265, T10264, T10008, T10060A, 3359, T10100, T10050, T10171A, T10170A, T10340, T10353, T10354, 6341, T10120, T10123, T10121, T10172, T10093, 3341, 3369, MP 1-300, 2064, 3418, VAG159, T20044, T10252, T40011, T40266, T40267, T40271, T10567, T20208, T40266, T10567, T40267, T40271

WINDOW SOCKETS – Allows for easy access to difficult components.
WIDE VARIETY OF APPLICATIONS – For removal and installation of top and wired sensors, thermo switches, ABS pipes, master cylinder pipes and diesel injection pipes. Also suitable for nuts and bolts of bent pipes.
MANUFACTURED FROM CHROME VANADIUM STEEL – Heat treated for strength and durability.
6PC SET- Contents: 3/8"Sq Drive; 10, 11, 12, 14mm, 1/2"Sq Drive; 17, 19mm.
SUPPLIED IN STORAGE CASE – For easy storage solutions.

Contents:
3/8"Sq Drive; 10, 11, 12 &, 14mm, 1/2"Sq Drive; 17, 19mm.

Nett Weight:
0.5kg

DURABLE - Aluminium die-cast head and steel body.
COMPREHENSIVE - With rigid extension tube, coupler and 3oz grease cartridge.
DIVERSE - Suits smaller jobs or hard-to-reach applications
CONVENIENT - 3-Way loading with either easy loading cartridge, bulk or suction fill.
SIMPLE - Lever type pistol grip mechanism.

Capacity:
3oz/85g Cartridge

Delivery per Stroke:
0.8g per stroke

Delivery Pressure:
3500psi

Nett Weight:
0.69kg

Optional Accessories:
SCS140 - Multipurpose Lithium Grease Cartridge 85g - Pack of 3

EXTENDED - 6" Extended anvil allows user to access hard-to-reach bolts.
VERSATILE - Suitable for commercial and agricultural vehicle use.
ERGONOMIC - Well-designed handle offers smooth operation, reducing vibrations for enhanced operator comfort.
LIGHTWEIGHT - Manufactured from durable aluminium housing, ensuring a strong yet lightweight tool for ease-of-use.
HEAVY DUTY - Suitable for all needs with high power and resistance.
3 YEAR GUARANTEE*.

Air Consumption:
17.6cfm

Breakaway Torque:
1550lb.ft(2100Nm)

Drive:
1"Sq

Fastening Torque:
1000lb.ft(1350Nm)

Free Speed:
7500rpm

Inlet Size:
3/8"BSP

Nett Weight:
5.4kg

Noise Power/Pressure:
116/105dB(A)

Operating Pressure:
90psi

Vibration/Uncertainty:
11.37/0.98m/s²

ULTRA COMPACT AND LIGHTWEIGHT - Ultra-compact and lightweight unit weighing just 4kg approx.
IDEAL FOR A MOBILE TECHNICIAN - Portability allows the welder to be taken to the job at hand, ideal for mobile technicians.
SUITABLE FOR MOST ARC/MMA WELDING RODS - Unit can ARC/MMA weld a variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø5mm.
USER FRIENDLY FUNCTIONS - Features LED display, with thermal cut-out protection, anti-stick, arc force and hot start functions.
SUPPLIED WITH - Supplied with 1.6m 25mm² cable with electrode holder and a 1.4m 25mm² earth clamp and cable, both with 10-25 dinse connectors.

Nett Weight:
4.8kg

Welding Current:
20-200A

Duty Cycle:
60% @ 200A, 100% @ 155A

Absorbed Power:
9kW

Electrode Capacity:
1.6-5.0mm

Supply:
230V - 16A*

Plug Type:
Bare Wire

Power Supply Cable Length:
2m

IP Rating:
IP21S

Weight:
4.8kg

*Note
To achieve maximum power a 16A supply may be required.

IGBT INVERTER TECHNOLOGY - IGBT Inverter fan-cooled DC power supply for MIG/TIG and MMA/ARC welding applications up to 160A.
3-IN-1 FUNCTION - Multi-functional welder bringing together MIG/TIG and MMA application all into one compact unit ideal for workshops, garages, bodyshops and mobile technicians.
HIGHLY PORTABLE - Ultra-compact and lightweight weighing just 6.9kg and supplied with handy carry strap making this unit highly portable allowing the welder to be taken to the job at hand.
FEATRUING - Featuring hot start, anti-stick, forced air cooling and thermal cut out protection.
WELDING CAPABILITY - Unit can MIG weld using 1kg Ø0.8/0.9/1.0mm solid wire and Ø0.8/0.9mm flux cored MIG wire, MMA/ARC weld Ø1.6 up to Ø4.0mm electrode.
SUPPLIED WITH - Supplied with fixed non-live MIG torch, 1.4m earth cable/clamp, 1.6m electrode holder.
DUTY CYCLE – MIG - 60% @ 160A, TIG - 60% @ 160A, MMA/ARC - 60% @ 160A.

Nett Weight:
6.9kg

Welding Current:
10-160A

Duty Cycle MIG:
60% @ 160A, 100% @ 124A

Duty Cycle MMA/ARC:
60% @ 160A, 100% @ 124A

Duty Cycle TIG:
60% @ 160A, 100% @ 124A

Wire Capacity:
1kg Ø0.8/0.9/1.0mm solid wire and Ø0.8/Ø0.9mm flux cored MIG wire

Electrode Capacity:
1.6-4mm

Absorbed Power:
4.4kW

Supply:
230V 16A*

Insulation Class:
H

IP Rating:
IP21S

Note *
To achieve maximum power a 16A supply may be required.

Part of the SV20 Series designed for the professional, offering heavy-duty, high performance, durable tools with lightweight composite designs for superior control and comfort.
Powerful, lightweight cordless impact wrench.
Durable composite housing with soft grip for added comfort.
Brushless motor, which gives an improved performance and requires less maintenance than the brushed equivalent, giving you a more efficient, longer lasting tool.
Produces torque of up to 350 Nm.
Variable speed trigger switch for easy control.
All metal gear construction for ultimate durability and performance to help you tackle the toughest of jobs.
Built-in LED worklight.
Forward, reverse and trigger-lock.
Supplied with belt hook for safer storage whilst not in use.
Requires compatible 20V battery and mains charger, sold separately.
3 Year guarantee*.

Battery:
20V 2Ah - 6Ah Lithium-ion (not included)

Breakaway Torque:
350Nm(258lb.ft)

Consumable Parts:
CP20VBP2 - 2Ah Battery, CP20VBP4 - 4Ah Battery, CP20VBP6 - 6Ah Battery

Drive:
1/2"Sq Drive

Fastening Torque:
240Nm(177lb.ft)

Impact Rate:
0-3780bpm

Nett Weight:
1.16kg

No-Load Speed:
0-2700rpm

Replacement Parts:
CP20VMC - Mains Charger (not included)

Compact and lightweight unit.
Unit can ARC/MMA weld a variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø3.2mm.
Features thermal cut-out protection, anti-stick, arc force and hot start functions.
Portability allows the welder to be taken to the job at hand, ideal for the mobile technicians.
Supplied with 2m 16mm² cable with electrode holder and a 2m 16mm² earth clamp and cable, both with 35-70 quick connectors.
Forced air cooling system.
3 Year guarantee*.

Nett Weight:
4.9kg

Welding Current:
20-140A

Duty Cycle:
100% @ 63A, 60% @ 81A, 20% @ 140A

Electrode Capacity:
Ø1.6-3.2mm

Absorbed Power:
5.75kW

Supply:
230V-13A* *Note: To achieve maximum power a 32A supply may be required.

Protection:
IP21S

Weight:
4.9kg

LITHIUM BATTERY & SOLAR POWERED - Lithium battery powered blower unit gives the user a cooling stream of air to their head and face for up to 8 hours. Solar power panel supply for welding helmet.
FULLY ADJUSTABLE - Adjustable airflow settings of 170 and 200L/min. Welding helmet has adjustable shade control from 9-13. Additional shades 5-8 for gas welding and cutting. Adjustable headband for added comfort.
SENSITIVITY & DELAY CONTROLS - Helmet features sensitivity and delay controls for switching light to dark. Fully automatic switching from light to dark on striking arc.
REDUCES & REMOVES DUST - Designed to reduce or remove dust and particles but not vapours and gases.
COMPLIANT WITH BS & DIN STANDARDS - Welding helmet complies with BS EN 379, BS EN 175, EN12941 and DIN standards.

Grinding Function:
Yes

Nett Weight:
3.91kg

Operating Temperature:
-5°C to +55°C

Operating Time Light/Dark:
0.1ms

Power:
Solar Cells/Rechargeable Lithium Battery

Shade Active:
5-8 Switchable & 9-13 Variable

Shade Inactive:
4

Shade Active:
5-8 Switchable & 9-13 Variable

Shade Inactive:
4

Grinding Function:
Yes

Viewing Area:
120 x100mm

Internal Safety Visor:
No

Operating Time Light/Dark
0.1ms

Operating Temperature:
-5°C to +55°C

Power:
Solar Cells/Rechargeable Lithium Battery

Viewing Area:
120 x 100mm

Steel cabinet with replaceable viewing screen and internal illumination.
Fitted with shot blasting gun and suitable for proprietary brands of glass beads, silicone carbide, aluminium oxide only.
Excellent for a wide variety of workshop and bodyshop cleaning applications.
Requires a standard, dry workshop air supply.
Supplied assembled and ready for use.
Overall Size (W x D x H): 640 x 490 x 490mm.

Air Consumption:
12cfm

Door Size:
530 x 440mm

Doors:
1

Inlet Size:
1/4"BSP

Nett Weight:
15.99kg

Operating Pressure:
90psi

Overall Dimensions (W x D x H):
640 x 490 x 490mm

Viewing Area:
490 x 395mm

Knitted wrist smooth latex waterproof gloves provide excellent protection and resistance to water, oil and grease-based applications.
Extra textured coating on palm for superior grip and control for use in wet environments whilst maintaining flexibility and comfort.
Conforms to BS EN 388:2016 + A1:2018 - performance levels 3-1-4-1-X.
Size 10.
Contains materials that may cause allergic reactions to susceptible individuals - refer to care instructions for material contents.

Nett Weight:
0.080kg

Qty:
1 Pair

Size:
X-Large

HI-GRIP® - Capable of providing more grip than conventional hose clips.
MADE IN UK - Manufactured to exceed BS5315 and kitemark approved.
EXTERNAL THREAD - Pressed thread leaves the inside of the clip smooth to maximise contact with the hose.
ROUNDED EDGES - Prevents damage to the hose.
ZINC PLATED - Provides protection against corrosion.
ASSORTMENT - Contains 81pcs, including sizes Ø9.5-55mm.
CONTENTS - Approximate Quantity: Band Width 9.5mm; Ø9.5-12 (x10), Ø11-16 (x10), Ø13-20mm (x8), Band Width 12mm; Ø14-22 (x8), Ø17-25 (x10), Ø22-30 (x10), Ø25-35 (x5), Ø30-40 (x5), Ø35-45 (x5), Ø35-50 (x5), Ø40-55mm (x5).

Contents:

(Approximate Quantity): Band Width 9.5mm; Ø9.5-12 (x10), Ø11-16 (x10), Ø13-20mm (x8), Band Width 12mm; Ø14-22 (x8), Ø17-25 (x10), Ø22-30 (x10), Ø25-35 (x5), Ø30-40 (x5), Ø35-45 (x5), Ø35-50 (x5), Ø40-55mm (x5).

Nett Weight:
2.40kg

One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.
Range: 60-330Nm(44.3-243.5lb.ft).
Flip reverse Chrome Vanadium steel ratchet head with smooth action mechanism.
Scale graduated in Nm and lb.ft.
Calibration tolerance in accordance with BS EN ISO 6789-1:2017.
Wrenches are individually tested to standards with ±4% accuracy and each wrench is issued with an individually numbered test certificate.
Aluminium knurled handle for comfort and control.
Supplied in an EVA tray.
Lifetime guarantee*.

Drive:
1/2"Sq Drive

Length:
575mm

Nett Weight:
1.38kg

Range:
60-330Nm (44.3-243.5lb.ft)

One-person brake and clutch bleeding the professional way. Bleeding requires no external power source - simply fill and pump.
Reservoir holds 2.5L of hydraulic fluid - flush the entire system with one fill, without the risk of running the reservoir dry.
Pressure range makes unit suitable for use with ABS systems.
Fitted with Ø45mm cap with 90° angled connector which is suitable for most European models.
For alternative Brake & Clutch Bleeder Caps, order Model No's VS820SA, VS820UA, VS0204B, VS0204T, VS0204C4 and VS0204C.

Nett Weight:
1.22kg

Adaptors:
Ø45mm Cap

Capacity:
2.5L

Maximum Pressure:
28psi

Optional Caps:
VS820SA, VS820UA, VS0204B, VS0204T, VS0204C4, VS0204C

Fastening Torque: 1475lb.ft(2000Nm).
Breakaway Torque: 1660lb.ft(2250Nm).
Combination of composite materials, alloyed metals and twin hammer design result in a durable and powerful air impact wrench.
Soft grip handle with downward facing exhaust make this wrench comfortable on the hands and ears and limits the circulation of brake dust on wheel applications.
Fingertip power control and direction via a dial on rear of wrench.
Suitable for professional garage use.
Supplied with side handle.

Air Consumption:
38cfm

Breakaway Torque:
1660lb.ft(2250Nm)

Drive:
1"Sq

Fastening Torque:
1475lb.ft(2000Nm)

Free Speed:
4200rpm

Inlet Size:
3/8"BSP

Nett Weight:
5.87kg

Noise Power/Pressure:
115/104dB(A)

Operating Pressure:
114psi

Vibration/Uncertainty:
9.4/1.3m/s²

Compact and easy-to-use to raise a vehicle either manually or with an electric drill of 90Nm or more (do not use an impact wrench as this will damage the mechanism).
While raising, the lift can be stopped at any height before locking the vehicle level.
Once raised, it can be tilted forwards or backwards to allow greater access to underside of car (always use suitably rated axle stands before getting under a vehicle).
Three adjustable width settings (775/1130/1530mm) allows narrow chassis cars to be lifted, such as MGs and other small classic cars.
Even with modern wider cars, this style of lift allows easy-access to sills and edges of vehicle that some lifts would obscure.
This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.

Capacity:
1500kg

Lock Spacing:
N/A

Locking Positions:
3

Maximum Lift Height:
585mm

Nett Weight:
67kg

Overall Size (W x D x H):
1185 x 775 x 160mm (minimum)

PORTABLE - A transportable lifting system which makes total vehicle lifting, for maintenance or detailing, a much easier task.
LIGHTWEIGHT - Each Strut weighs less than 40kg, and is on wheels for easy positioning.
CONTROLLABLE - A simple up and down control unit, has a long lead, making it possible to observe the entire lift at all angles.
SAFETY LOCKS - Automatic safety lock bars, with dual locking positions.
LOW-PROFILE - A low clearance height of just 75mm, making it ideal for custom, sports and race vehicles.

Capacity:
2250kg

Lock Spacing:
237, 77, 48

Locking Positions:
311, 38, 436

Maximum Lift Height:
445mm

Nett Weight:
104.4kg

Overall Size (W x D x H):
Lowered/Extended: 1780/1555mm x 280mm x 74/445mm

A universal device that enables the removal and installing of hubs, bearings and silent blocks from their housings, thanks to a dedicated support base and accessories. The support is designed to adapt to the irregular geometries shapes on which the operator must work.
Can be used with 3027N and 3028 presses.


Technical data:
• Working range: min. 135 mm - max. 150 mm
• Maximum load bearing capacity: 20 t
• Dimensions: 250x202 mm
 7,5 Kg

Up to 1000V power.
Equipped with a high-visibility digital screen and a convenient self-test function, the tool ensures both accuracy and reliability in each measurement.


Features:
• Voltage: 24÷1000VAC / 6÷1000VDC
• Bar voltage indicator: 6-12-24-50-120-230-400-690-1000
• Accuracy: ± (3% + 3)V
• Response time: < 1s (09%)
• Maximum absorbed current @1000V: < 3,5mA
• Contact-free voltage detection: > 90VAC
• Phase rotation test:100÷1000VAC (50/60Hz)
• Phase angle: 120° ±5°
• Continuity test:0±1.3 MΩ
• Current (continuity test): ≤5 μA
• Pollution level:
• Power supply:
 312 g

Portable tyre inflator with automatic and manual charging. This outstanding instrument, fitted with a double scale (bar/psi) gauge, is essential for garages and service stations. Ideal for testing and restoring tyre pressure accurately and quickly. The quick coupler with wall bracket allows the tank to be automatically charged. As a result, the device is always ready for use. Convenient, lightweight and compact, this tyre inflator is an irreplaceable partner for rescue and quick jobs. Do not miss the opportunity to improve your efficiency with this versatile, reliable tool!


Technical data:
• Tank capacity: 10 l
• Max. tank pressure: 16 bar (232 psi)
• Tank pressure gauge, Ø 50 mm: 0÷16 bar (232 psi)
• Operating pressure gauge: 0÷16 bar (232 psi)
• Inflating hose length: 1550 mm
• Empty weight: 9.3 kg
 9,3 Kg

Beta's assortment 1477/C38, your partner for accurate tightening jobs on belt tighteners and engine parts. The 500-mm long ratchet lever, with central joint, allows the ideal angle to be determined, thereby making jobs easier. The short sockets, available with several different heads, fit small spaces perfectly. Hence no additional parts must be removed.

Kit contents:
• Swivel lever with 500-mm long reversible ratchet
• Short sockets for Torx® head screws: E10-E12-E14-E16-E18
• Short hexagon sockets: 8-9-10-11-12-13-14-15-16-17-18-19-24
• Bits for Torx® head screws: T20-T25-T27-T30-T40-T45-T50-T55-T60
• Bits for cross head Phillips® screws: PH2
• Hexagon bits: 4-5-6-7-8-10 mm
• Magnetic bit holder
• 3/8" extension, 75 mm


 2 Kg
 630x130x55 mm -  2 kg

The tool for manually pushing back brake pistons, fitted with two swivel plates and a ratchet movement mechanism, means an effective, flexible solution for quick jobs - e.g. on commercial vehicles.


 819 g

Composed of:

C55B/2.8
Workbench with worktop 2850x700 mm covered with a shockproof, nonscratch, ABS coat resistant to oils and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55MS
Fixed service module
• Built-in waste bin
• Paper roll compartment
• Storage drawer, 305x270 mm

C55C7
Mobile roller cab with seven drawers
(588x367 mm), with ball bearing slides
• 4 castors, Ø 100 mm, 2 fixed and 2 steering (one with brake)
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with foam trays

C55M7
Fixed module with seven drawers
(588x367 mm), with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with thermoformed trays


C55PM + C55PT1,0x0,6 + C55/PF
• 2 suspended cabinets (1024x400x300 mm) fitted with gas springs
• 2 under-cabinet panels (1024x620x25 mm)
• 2 perforated under-cabinet tool panels (1024x620x25 mm)

C55PM/M0.8 + C55PT0.8x0.6 + C55/1PF
• 1 suspended cabinet (800x400x300 mm) fitted with gas springs
• 1 under-cabinet panel (800x620x25 mm)
• 1 perforated under-cabinet tool panel (800x620x25 mm)


 467 kg

Composed of:

C55B/2.8
Workbench with worktop 2850x700 mm covered with a shockproof, nonscratch, ABS coat resistant to oil and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55M7
Fixed module with seven drawers
(588x367 mm), with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with foam trays

C55MA
Fixed two-door module
• Push-pull opening system
• With lock
• Interior shelf, vertically adjustable

C55M4
Fixed module with four drawers
(588x367 mm), with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with foam trays

C55PM + C55PT1,0x0.6 + C55/PF
• 2 suspended cabinets (1024x400x300 mm) fitted with gas springs
• 2 under-cabinet panels (1024x620x25 mm)
• 2 perforated under-cabinet tool panels (1024x620x25 mm)

C55PM/M0.8 + C55PT0.8x0.6 + C55/1PF
• 1 suspended cabinet (800x400x300 mm) fitted with gas springs
• 1 under-cabinet panel (800x620x25 mm)
• 1 perforated under-cabinet tool panel (800x620x25 mm)

C55A2
• 1 two-door tool cabinet


 535 kg

Composed of:

C55B
Workbench with worktop (2050x700 mm) covered with a shockproof, nonscratch ABS coat resistant to oils and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55C7
Mobile roller cab with seven drawers (588x367 mm) with ball bearing slides
• 4 castors Ø 100 mm, 2 fixed and 2 steering (one with brake)
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralized lock
• Can be fitted with thermoformed trays

C55MA
Fixed two-door module
• Push-pull opening system
• With lock
• Interior shelf, vertically adjustable

C55PS
Tool wall system with shutter and framework
• Aluminium shutter, vertically adjustable, with lock
• Removable perforated tool panel


 347 kg

Composed of:

C55B
Workbench with worktop (2050x700 mm) covered with a shockproof, nonscratch ABS coat resistant to oils and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55M7
Fixed module with seven drawers (588x367 mm) with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralized lock
• Can be fitted with thermoformed trays

C55MS
Fixed service module
• Built-in waste bin
• Paper roll compartment
• Storage drawer, 305x270 mm

C55/2PM + C55/PF
Tool wall system with 2 suspended cabinets
• 2 suspended cabinets, 1024x400x300 mm, with gas springs
• 2 under-cabinet panels, 1024x620x25mm
• 2 under-cabinet perforated tool panels, 1024x620x25 mm


 350 kg

Quick, functional

Ideal for removing:
• hail dents
• dents caused by doors
• small dents in general
ideal for removing:
• hail dents
• dents caused by doors
• small dents in general

Takes just a few seconds to test compression.

Allows endothermic engine compression to be tested within just a few seconds, without requiring connection to engine, taking power from vehicle battery, through a dedicated software.

Step 1: calculating engine rpm
Step 2: testing battery voltage trend during each revolution
Step 3: displaying absorbed power and compression calculated through starter operation for each piston
Step 4: testing battery charge and efficiency

Technical data:
• Operating voltage: 12V DC (vehicle battery)
• Dimensions: 140x75x30 mm
• Clamp cable length: 1300 mm
• Weight: 215 g

https://youtube.com/watch?v=mWyKL-TJfaA%26hl%3Den%26fs%3D1%26rel%3D0

Suits most car seats, steering wheels and gear knobs


• One size fits all
• Reusable and washable
• Made of hard-wearing nylon with stretch strings
• Material: 98% polyamide/nylon, 2% polyurethane

• Die-cast aluminium body plated with black chemical nickel
• Nylon cup with drip-catching device, 3/8M BSP thread
• Body thread: 1/4" BSP cylindrical gas thread
• Pressure and airflow regulator
• Jet regulator from round to fan spray pattern
• Paint quantity regulator
• Supplied with service spanner for maintenance operations

1567
Lever for removing wishbone heads and shock absorbers from pillar
One operator can position lever effortlessly
and proceed with disassembly.

It is enough to apply a force of 20 Nm.

Ideal for cars and commercial vehicles

allows quicker replacement jobs on:
- timing belt
- water pump
- alternator

ADVANTAGES
- it takes operator just a few seconds to apply cross member and fix it under vehicle
- includes 2 pairs of stabilizer pins, to work on cars, vans and commercial vehicles
- loading belt allowing cross member to be held steady, even when chassis does not have any holes

TECHNICAL DATA
max. capacity: 250 kg
length: 1050 mm
height: 120 mm
max. jack height: 260 mm
weight: 12 kg

Portable induction heater
Quick loosening of nuts and bolts.
Maximum safety without using flames.


Heats and loosens bolts, hubs and bearings without using flames.
Allows any type of ferromagnetic metal to be heated.

Standard equipment:
• Two front attachable coils, Ø 19 and 26 mm, for loosening nuts
• One flat coil for heating surfaces
• One flexible coil, 800 mm long
• Supplied in plastic case

Technical data:
• Input voltage: 230V AC, 50/60 Hz
• Input current: max. 7,5A
• Power: max. 1.75 kW

Optional Equipment:
• Coils are also available in other sizes

Benefits:
• Time saving: quick, extremely accurate heating
• Fire safety: does not produce flames, maximum operator safety
• Functional: can be used with one hand, and coils can be easily interchanged

Fields of Application:
• Automotive industry
• Industrial maintenance
• Aviation industry
• Naval industry
• Petrochemical industry

480x370x130 mm -  4,5 kg

Makes it possible to work on vehicles that are high from the ground and have a long shock absorber travel:

Features:
• Controlled descent speed
• Quick approach pedal
• Nylon wheels

Main features:
• 6 fully removable drawers (588x367 mm), with ball bearing slides:
4 drawers 70 mm high
1 drawer 140 mm high
1 drawer 280 mm high

Features:
• ABS reinforced worktop, solid and sturdy
• Multi-purpose top with anti-fall edges and 8 holes for accommodating screwdrivers
• 4 castors Ø 125 mm - 2 fixed and 2 steering (one with brake)
• Front centralised safety lock
• Static load capacity: 800 kg

Mobile roller cab with 7 drawers, with wood worktop and anti-tilt system, long model
Work surface increased by no less than 25%!
Long model with 7 fully removable drawers (882x367 mm), with ball bearing slides:
• 5 drawers, 70 mm high
• 1 drawer, 140 mm high
• 1 drawer, 210 mm high

• Multi-ply wood worktop with holes for a vice 1599F/100 or 1599GI/100 (to be ordered separately)
• Sturdy nylon front, with built-in label holder
• Drawer bases protected by foamed rubber mats
• 4 castors, Ø 125 mm: 2 fixed and 2 steering (one with brake)
• Front centralized safety lock
• Static load capacity: 1.100 kg
• Built-in side bottle holder (can be applied on both sides)
• Built-in paper roll holder
• Each drawer can accommodate up to 6 EVA foam or ABS thermoformed trays


Following accessories can be added:
• perforated tool panel with supports 2400 RSC24AXLP/PF
• computer bracket 2400 RSC24/SPC
• side tool tray 2400 RSC24AXLP/VL
• waste bin 2400 RSC24AXLP/CPR
• folding side shelf 2400 RSC24/MP
 105 kg

The evolution of the C24S roller cab!
Reinforced worktop and a wide range of dedicated accessories!
Available in 7 different colour combinations!
New ABS reinforced worktop, designed to support tool chests RSC22, RSC23, RSC23C and RSC23T.
Main features:
• 7 fully removable drawers (588x367 mm), with ball bearing slides:
5 drawers, 70 mm high
1 drawer, 140 mm high
1 drawer, 210 mm high
• Multi-purpose top with anti-fall edges and eight holes for accommodating screwdrivers
• Four castors Ø 125 mm:
2 fixed and 2 steering (one with brake).
• Front centralized safety lock.
• Static load capacity: 800 kg.
• Built-in bottle holder (can be applied on both sides).
• The following accessories can be added:
wood worktop 2400 RSC24/PL
perforated tool panel 2400 RSC24/PF
folding shelf 2400 RSC24/MP
computer wall bracket 2400 RSC24/SPC
document holder 2400 RSC24//PD (available in anthracite grey or black)
paper roll holder 2400 RSC24/PC (available in anthracite grey or black)
• Drawer bases protected by foamed rubber mats.
• Each drawer can accommodate up to 4 EVA foam or ABS thermoformed trays.

A professional solution, ideal for light carpentry and maintenance jobs, the inverter welding machine, 1860BHT/160A, stands out as a first-rate item developed from the merger of BETA S.p.A. and the Italian-based welding industry leader, HELVI S.p.A.
This DC-powered inverter welding machine can be used for both MMA welding with rutilic, basic and stainless steel electrodes, and TIG steel welding.
Compact and lightweight, the welding machine supports the arc force, STICK/TIG (lift arc), hot start, anti-sticking and thermostatic protection features.


Features:
• Adjustment current: 10÷160A
• Power supply: 1x230V
• Use factor (40 °C) :
35% - 160 A
60% - 130 A
100% - 95 A
• Protection: IP23S
• Usable electrodes: Ø 1.6 - 4 mm rutilic, basic, stainless steel.
• Supplied with 25 mm² cables
• Dimensions: 360x140x230 mm
• Welding machine weight: 6.2 kg
• Torch length: 4 m

Workshop equipment Beta RSC50.
The new range of workshop equipment is characterised by attention to detail and refined finishes.

Comprehensive combination comprising:
• 1 single-door tool cabinet (RSC50 A1)
• 1 750-mm-long worktop (RSC50 PG/1-0,7MT)
• 1 2.240-mm-long worktop (RSC50 PG/3-2,2MT)
• 1 mobile roller cab with 7 drawers (RSC50 C7)
• 1 fixed module with 4 drawers (RSC50 M4)
• 1 fixed module with 7 drawers (RSC50 M7)
• 1 fixed service module (RSC50 MS-AVV) with compressed air hose reel item 1900S 8x10 (included)
• 1 tool wall system with aluminium shutter and framework (RSC50 PS)
• 2 wall-mounted cabinets (RSC50 PM)
• 2 upper perforated tool panels (RSC50 PFS)
• 2 lower perforated tool panels (RSC50 PFI)
• 2 pairs of right/left uprights (RSC50 P/2MDX-SX)
• 1 two-door tool cabinet (RSC50 A2)

Design and Quality Made in Italy

The new workshop equipment is designed and manufactured in Beta's Italian factories, with the utmost attention to detail and choice of quality materials. The new range comprises preassembled combinations, developed by Beta for professionals; alternatively, you can design your workplace on your own, choosing from many under-bench modules, wall-mounted cabinets and furnishing accessories.


Deep and sturdy work surface
New sturdy and very deep worktop (63 cm) for a large, comfortable and functional work surface. It can be fitted with a vice, thereby allowing heavy-duty jobs to be carried out.

Wide range of compatible assortments
The drawers in Beta’s standard dimensions (588x367 mm) can accomodate the numerous tool modules, which are available in both soft and hard versions, made from EVA and ABS respectively.

Customisable modules
The customized colours of the drawer handles and lights under the worktops and wall-mounted cabinets result in unique workshop equipment.

Simple, Quick Installation
RSC50 range’s modules have been conceived and designed so that they can be assembled intuitively and quickly. In fact, thanks to optimized production of the various parts of the range, assembly of the RSC50 equipment involves fewer steps than other lines of workshop equipment.

The Bahco Mechanical Carpenter's HB Pencil requires no sharpening. It has a wide, strong lead that holds perfectly against rough materials. The angled shaped tip is ideal for precision marking when using a square. All contained within a high-impact ABS body that is rectangular shaped to avoid rolling. Replaceable lead that lasts up to 3x longer than standard pencils. Supplied with 3 leads.