Portable induction heater
Quick loosening of nuts and bolts.
Maximum safety without using flames.


Heats and loosens bolts, hubs and bearings without using flames.
Allows any type of ferromagnetic metal to be heated.

Standard equipment:
• Two front attachable coils, Ø 19 and 26 mm, for loosening nuts
• One flat coil for heating surfaces
• One flexible coil, 800 mm long
• Supplied in plastic case

Technical data:
• Input voltage: 230V AC, 50/60 Hz
• Input current: max. 7,5A
• Power: max. 1.75 kW

Optional Equipment:
• Coils are also available in other sizes

Benefits:
• Time saving: quick, extremely accurate heating
• Fire safety: does not produce flames, maximum operator safety
• Functional: can be used with one hand, and coils can be easily interchanged

Fields of Application:
• Automotive industry
• Industrial maintenance
• Aviation industry
• Naval industry
• Petrochemical industry

480x370x130 mm -  4,5 kg

This Trend GRAB/SE1/set Damaged Screw Remover Set (2pc) has versatile double-ended bits to remove damaged screws, machine screws and broken bolts from wood, metal and plastic. Made from high-speed steel they can remove screw sizes from Nos. 6 - 14 and broken bolts from size M4 - M8, they will remove these cleanly from wood, metal or plastic.Removing screws made of any alloy, including soft brass, and also removes free spinning screws. They have a Winslow tip for self-centring and are double ended (burnisher and tapered thread). The hex shoulder aids removal of jammed screws or bolts and the serrated extracting end of the tool results in torque for hard to remove screws. Specifications: Set of two bits, Size No 2 and No 3.Screw Sizes: No 6 to No 14.Bolt Sizes: M4 to M8.

Screw pitch gauges quickly determine the pitch of various external and internal threads. These gauges consist of a substantial steel case with a number of folding leaves at both ends, each leaf having teeth corresponding to a definite pitch. Whitworth standard - 55 threads No. of leaves: 30 TPI range: 3 1/2 - 60 With positive stop.

Supplied with a tapping drill.Kit 1/2 Whit x 12 tpiLength 1 1/2 X Diameter

Supplied with a tapping drill.Kit 3/8 Whit x 16 tpiLength 1 1/2 x Diameter

Supplied with a tapping drill.Kit 5/16 Whit x 18 tpiLength 1 1/2 X Diameter

Supplied with a tapping drill.Kit 1/4 Whit x 20 tpiLength 1 1/2 x Diameter

Kit 1/4 BSP x 19tpiLength 1 1/2 x Diameter

Kit 3/8 BSF 20tpi

Kit 5/16 BSF 22tpi

Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplifiy changeover from unified to metric or vice versa.They reduce thread wear and are interchangeable with other brands of inserts or tooling. Size. 1/4 BSF X 26TPI Length. 1 1/2 x Diameter.

An extremely handy pocket sized reference booklet of data charts and tables for the drawing office, toolroom or workshop. This metric revision publication is produced by Zeus Precision Charts Ltd, who are members of the British Standards Institution. The 28 laminated pages contain data on standard drill sizes and decimal equivalents, tapping drills and clearances for metric and imperial threads, BS4500 tolerances, hardness comparisons, jig boring co-ordinates for equally spaced holes, allowances for sheet metal bending and Morse tapers. Also, long tables for sine, cosine, tangents and cotangents.

The Moore Wright 891 Series Adjustable Depth Micrometer features interchangeable depth rods, with a 4mm diameter. These adjustable depth micrometers conform to BS6468:1984. Base Length: 63.5mm / 2.1/2in. The Moore Wright 891M150 Adjustable Depth Micrometer has the following specification: Range: 0-150mm.Resolution: 0.01mm.

The Moore Wright 890M Fixed Type Depth Micrometer has a fixed depth rod with a 6.5mm diameter. It is fitted with a 'speeder' type ratchet and a lock screw for added user convenience. Conforms to BS 6468:1984. Specification: Base Length: 63.5mm (2.1/2in)Range: 0-25mmResolution: 0.01mm

The Moore Wright MW496-01 Magnetic Snake Stand has a corrosion resistant chrome plated flex arm that will hold rigidly in almost any position. The V-shaped base is perfect for mounting on rounded surfaces. There is a powerful magnetic base that can be turned on and off depending on the user requirements and the magnetic force is equal to 40kg/85lbs.

The Moore Wright MW475-01 Magnetic Indicator Stand features fine adjustment and accepts dial test indicators, digital indicators, and normal indicators. It is a universal model which can be used for indicators with or without a lug style back plate. The stand's powerful magnetic base can be turned on and off depending on the user requirements, and there is a magnetic force of 80kg/175lbs.

The Moore Wright 200 Series Digital External Micrometer has a tapered design that provides easier access to difficult areas and a hammertone finished frame with a high quality insulated grip. It also has tungsten carbide measuring faces and a constant force ratchet on the thimble. The large LCD display allows for 4 types of measurement (mm/inch conversion and Absolute/Incremental reading) and a zero setting. The micrometers are manufactured to DIN 863 standards. Specification Range: 0-25mm/0-1in.Resolution: 0.001mm/.00005in.

The Moore Wright Traditional External Micrometer has a pearl chrome plated frame with insulation pads, tungsten carbide measuring faces and a tapered bow frame. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards. Supplied in plastic pocket case. The 1961M Traditional External Micrometer has the following specification: Micrometer Range: 0-25mm. Measuring Faces: Flatness: 0.001mm, Parallelism: 0.003mm, Accuracy: 0.003mm.Resolution: 0.01mm.

The Moore Wright Water Resistant Series Digital Calliper are fitted with a patented ceramic capacitive sensor and a large LCD display offering 4-way measurement (mm/inch, absolute/incremental). They can be zeroed at any point on the scale and are fitted with a conveniently located on/off switch. The callipers are manufactured to DIN 862 standards, and are water and dust resistant to IP54 specifications. Supplied with a CR2032 battery. Specification:Range: 0-150mm (0-6in).Resolution: 0.01mm (0.0005in).Jaws: 40mm.

The Moore Wright DPC Series Digital Calliper has a polycarbonate frame and offers 4-way measurement (mm/inch, absolute/incremental) with an accuracy of 0.2mm/0.008in. The calliper can be zeroed at any point on the scale.Supplied with a CR2032 battery and a vinyl pouch. Specification:Range: 0-150mm (0-6in).Resolution: 0.01mm (0.0005in).Jaws: 40mm.

This Facom 11 piece shock absorbing punch set contains drift, nail and centre punches. Contains: 6 x Drift punches 2, 3, 4, 5, 6 and 8mm.4 x Nail punches 4, 5, 6 and 8mm.1 x Centre punch 6mm.

The Facom 249.GJ7 7-piece set consists of 7 sheathed impact tools/drift punches. The punches are tough and durable. With very high tensile strength, they feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption. Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener. This set contains:1 x 249.G2 punch - 2mm x 140mm.1 x 249.G3 punch - 3mm x 150mm.1 x 249.G4 punch - 4mm x 190mm. 1 x 249.G5 punch - 5mm x 200mm.1 x 249.G6 punch - 6mm x 210mm.1 x 249.G8 punch - 8mm x 216mm.1 x 249.G10 punch - 10mm x 230mm.

This compact set of engineering tools contains 6 essential marking and measuring tools. Supplied in a wooden storage case, the set contains the following tools: Faithfull FAIESMEASURE Engineers Marking Measuring Set 6 Piece comprises:3 x Precision Stainless Steel Squares 50mm (2in), 100mm (4in), 150mm (6in), accurate to BS939 Grade B standard.1 x Steel Centre Finder 38mm capacity.1 x Stainless Steel Rule 150mm (6in).1 x Scriber 135mm (5¼in).

The Boa Micro Grabit extractor is a precision instrument, designed for the electronics and precision engineering industries. It removes delicate screws and bolts in more restricted areas and the set combination will allow fast and efficient removal of all small size diameter screws and bolts. Great for fixing cameras, glasses, tech. equipment etc. Works with all standard variable drills. Fits: Micro R #56: Screw sizes 0-2 / Bolt size 56Micro R #8: Screw sizes 2-4 / Bolt size 8Micro R #10: Screw sizes 4-7 / Bolt size 10Micro R #12: Screw sizes 7-10 / Bolt size 12

The BOA Grabit - the worlds best-selling screw and bolt remover. The Grabit quickly and easily removes broken, damaged or embedded screws and bolts from wood, metal, plastic etc. It will work on all of the most popular screw head types. Simply burnish, flip the tool and extract. Compatible with all standard variable speed drills. Made from high-quality hardened steel, precision engineered for multiple use and maximum performance. Fits: Grabit #2: Screw sizes 8-10 / Bolt size 1/4inGrabit #3: Screw sizes 11-14 / Bolt size 5/16in

Faithfull Engineer's Squares Set supplied in a wooden storage case. Carefully crafted from high-quality tool steel, these squares are accurate to BS939 Grade B standard. The stock and blade are precision ground to ensure straightness and accuracy, and the spring steel blade is hardened and tempered for increased durability. Sizes: 50, 75, 100, 150mm

The Faithfull Feeler Gauge contains 20 blades that cover the sizes from 0.05mm to 1.00mm. The blades are 100mm long and made from hardened, tempered and polished steel. A knurled thumbscrew allows the blades to be locked in place. Feeler gauges are used to measure the size of small gaps between 2 objects that are in close proximity. Ideal for setting gaps between components in vehicle engines such as valve adjustment, setting distributors and checking spark plugs.

Dormer 14pc Set, features E500 straight flute taps and A002 TiN Coated Jobber Drills is ideal for a wide range of general purpose machining applications. It features the Dormer E500 straight flute taps and A002 TiN coated jobber drills. E500 Metric coarse straight flute taps: M3, M4, M5, M6, M8, M10 M12 Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. Tolerance: Class 2 for 6H Fit.Surface treatment: Bright.Material: HSS High Speed Steel.Chamfer No: 1,2 and 3, Serial no 4 and 5.Flute Geometry: Straight Flutes. A002 HSS-TiN Coated Jobber Drills : 2.5mm, 3.3mm, 4.2mm, 5.0mm, 6.8mm, 8.5mm and 10.2mm. General purpose drills, made from High Speed Steel with a Titanium Nitride coating for longer life, with good self centring capability on a wide range of materials. Particularly suitable for aluminium and other abrasive materials. Ideal for drilling wood and chipboard. Suitable for both hand and machine use. DIN338RN/BS328/ISO235.