Skip to Content

Tools

Pozidriv Impact Screwdriver Pocket Bit Set, 5 Piece
The Irwin Impact Screwdriver Bits are specifically designed for use in high torque impact drivers. They are manufactured from heavy-duty, high-grade steel and have a 3 times increased life compared to standard screwdriver bits. Their precision tip geometry delivers superior fitment, reducing stripping and cam-out. The bits are Power Groove designed for compatibility with the IRWIN Impact Performance Series™ magnetic screw-hold attachment. This set contains 5 x PZ2 screwdriver bits. Supplied in a moulded ABS resin case.
£ 17.98 17.98 GBP
Phillips Impact Screwdriver Pocket Bit Set, 5 Piece
The Irwin Impact Screwdriver Bits are specifically designed for use in high torque impact drivers. They are manufactured from heavy-duty, high-grade steel and have a 3 times longer life compared to standard screwdriver bits. Their precision tip geometry delivers superior fitment, reducing stripping and cam-out. The bits are Power Groove designed for compatibility with IRWIN Impact Performance Series™ magnetic screw-hold attachment. This set contains 5 x PH2 screwdriver bits.Supplied in a moulded ABS resin case.
£ 17.98 17.98 GBP
Phillips/Pozi/TORX Impact Screwdriver Pocket Bit Set, 5 Piece
The Irwin Impact Screwdriver Bits are specifically designed for use in high torque impact drivers. They are manufactured from heavy-duty, high-grade steel and have a 3 times longer life compared to standard screwdriver bits. Their precision tip geometry delivers superior fitment, reducing stripping and cam-out. The bits are Power Groove designed for compatibility with the IRWIN Impact Performance Series™ magnetic screw-hold attachment. This set contains the following:2 x PZ2 screwdriver bits.2 x PH2 screwdriver bits.1 x T20 screwdriver bit.Supplied in a moulded ABS resin case.
£ 17.98 17.98 GBP
Phillips Impact Screwdriver Bit Set, 10 Piece
The Irwin Impact Screwdriver Bits are specifically designed for use in high torque impact drivers. They are manufactured from heavy-duty, high-grade steel, and have a 3 times longer life compared to standard screwdriver bits. Their precision tip geometry delivers superior fitment, reducing stripping, and cam-out. The bits are Power Groove designed for compatibility with IRWIN Impact Performance Series magnetic screw-hold attachment. This set contains the following: 2 x PH1 screwdriver bits. 5 x PH2 screwdriver bits. 2 x PH3 screwdriver bits. 1 x Bit holder. Supplied in a moulded ABS resin case.
£ 25.15 25.15 GBP
Phillips/Pozidriv Impact Magnetic Screwdriver Bit Set, 5 Piece
The Irwin Impact Screwdriver Bits are specifically designed for use in high torque impact drivers. They are manufactured from heavy-duty, high-grade steel, and have a 3 times increased life compared to standard screwdriver bits. Their precision tip geometry delivers superior fitment, reducing stripping, and cam-out. The bits are Power Groove designed for compatibility with the IRWIN Impact Performance Series magnetic screw-hold attachment. This set contains the following:2 x PH2 screwdriver bits.2 x PZ2 screwdriver bits.1 x Magnetic screw hold attachment.Supplied in a moulded ABS resin case.
£ 12.57 12.57 GBP
Spectre Bit Set, 12 Piece
The ForgeFix 12 Piece Spectre™ Bit Set contains a selection of S2 heat-treated, hardened steel bits. Shock and wear proof, with precision machined tips for reduced cam out and screw head damage. Supplied in a handy carry case with the following: 4 x 25mm Pozidriv Compatible Bits: PZ1, PZ2(x2) and PZ3.7 x 25mm TORX Compatible Bits: TX10, TX15, TX20, TX25, TX27, TX30 and TX40.1 x Bit Holder 60mm.
£ 9.72 9.72 GBP
Spectre Bit Set, 31 Piece
The ForgeFix 31 Piece Spectre™ Bit Set contains a selection of S2 heat-treated, hardened steel bits. Shock and wear proof, with precision machined tips for reduced cam out and screw head damage. Supplied in a handy carry case with the following: 4 x 25mm Slotted Bits: 3, 4, 5 and 6mm.4 x 25mm Phillips Compatible Bits: PH1, PH2(x2) and PH3.5 x 25mm Pozidriv Compatible Bits: PZ1, PZ2(x3) and PZ3.13 x 25mm TORX Compatible Bits: TX10, TX15, TX20(x3), TX25(x3), TX27, TX30(x3) and TX40.4 x 25mm Hex Bits: 3, 4, 5 and 6mm.1 x Bit Holder 60mm.
£ 16.95 16.95 GBP
ForgeFast TORX® Compatible Impact Bit Set, 31 Piece
This ForgeFix 31 Piece ForgeFast Impact Bit Set contains a selection of ForgeFast TORX Compatible Impact Bits with a 1/4in hex shank. Made from specially engineered hardened steel to extend wear resistance and bit life. The optimal, shock absorbing torsion zone makes them ideal for high torque applications. The high tolerance machined tip reduces cam out and screw head damage. Supplied in a handy carry case with the following: 30 x 25mm TORX Compatible Impact Bits: TX10(x3), TX15(x3), TX20(x6), TX25(x7), T2X7(x2), TX30(x6) and TX40(x3).1 x Bit Holder 60mm. Finish: Black Phosphate
£ 21.77 21.77 GBP
ForgeFast TORX® Compatible Impact Bit Set, 12 Piece
This ForgeFix 12 Piece ForgeFast Impact Bit Set contains a selection of ForgeFast TORX Compatible Impact Bits with a 1/4in hex shank. Made from specially engineered hardened steel to extend wear resistance and bit life. The optimal, shock absorbing torsion zone makes them ideal for high torque applications. The high tolerance machined tip reduces cam out and screw head damage. Supplied in a handy carry case with the following: 11 x 25mm TORX Compatible Impact Bits: TX10, TX15, TX20(x2), TX25(x2), TX27(x2), TX30(x2) and T40.1 x Bit Holder 60mm. Finish: Black Phosphate
£ 12.36 12.36 GBP
ForgeFast PZ/TX Compatible Impact Bit Set, 31 Piece
This ForgeFix 31 Piece ForgeFast Impact Bit Set contains a selection of ForgeFast Impact Bits with a 1/4in hex shank. Made from specially engineered hardened steel to extend wear resistance and bit life. The optimal, shock absorbing torsion zone makes them ideal for high torque applications. The high tolerance machined tip reduces cam out and screw head damage. Supplied in a handy carry case with the following: 9 x 25mm Pozidriv Compatible Bits: PZ1(x2), PZ2(x5) and PZ3(x2).21 x 25mm TORX Compatible Bits: TX10, TX15(x2), TX20(x5), TX25(x5), TX27, TX30(x5) and TX40(x2).1 x Bit Holder 60mm. Finish: Black Phosphate
£ 21.77 21.77 GBP
ForgeFast Pozidriv Compatible Impact Bit Set, 12 Piece
This ForgeFix 12 Piece ForgeFast Impact Bit Set contains a selection of ForgeFast Pozidriv Compatible Impact Bits with a 1/4in hex shank. Made from specially engineered hardened steel to extend wear resistance and bit life. The optimal, shock absorbing torsion zone makes them ideal for high torque applications. The high tolerance machined tip reduces cam out and screw head damage. Supplied in a handy carry case with the following: 11 x 25mm Pozidriv Compatible Impact Bits: PZ1(x2), PZ2(x6) and PZ3(x3).1 x Bit Holder 60mm.Finish: Black Phosphate
£ 12.36 12.36 GBP
Screwdriver Bit Set, 61 Piece
The Faithfull Security Bit Set contains just about every screwdriver bit most tradesmen will ever need. With sixty Chrome Vanadium steel bits covering all popular drive systems. Supplied in a sturdy plastic storage case. Contains: 6 x Phillips Screwdriver Bits: PH0, PH1, PH2(3) PH3 6 x Pozidriv Screwdriver Bits: PZ0, PZ1, PZ2(3) PZ3 5 x Slotted Screwdriver Bits: 3, 4, 5, 6 7mm 12 x Hex Screwdriver Bits: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7 8mm 13 x Star Screwdriver Bits: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T35 T40 7 x Tamperproof Star Screwdriver Bits: TT10, TT15, TT20, TT25, TT27, TT30 TT35 6 x Hex Security Screwdriver Bits: 2, 2.5, 3, 4, 5 6mm 5 x Spanner Bits: 4 (2), 6, 8 10mm 1 x Magnetic Bit Holder 60mm
£ 13.30 13.3 GBP
Screwdriver Bit & Socket Set, 42 Piece
This high quality compact bit and socket set provides a useful addition to any toolkit. The 42 piece set contains a mix of the most commonly used screwdriver bits and popular sizes of ¼in hex sockets. This makes it ideal for a very high proportion of fixing activities across a multitude of trade, leisure, hobby and home applications. All of the screwdriver bits are precision manufactured in chrome vanadium S2 steel (desirable for its strength) and are colour coded for easy identification.The sockets have a satin chrome finish and have a ribbed centre section to enable fast hand tightening of nuts and bolts before final tightening via the ratchet handle. Supplied in a handy carry case.Contains: 9 x Pozidriv Bits: PZ1(2), PZ2(5) and PZ3(2).3 x Phillips Bits: PH1, PH2 and PH3.4 x Slotted Bits: 3, 4, 5 and 6mm.7 x Hex Bits - 2, 3, 4, 5, 6, 7 and 8mm.7 x Tamper-proof Bits: TTX10, TTX15, TTX20, TTX25, TTX27, TTX30 and TTX40.8 x 1/4in Square Drive Sockets - 5, 6, 7, 8, 9, 10, 12 and 13mm.1 x Ratchet Bar 90mm with an 8mm ring spanner and adaptor.1 x Socket adaptor 1/4in drive.1 x Quick-Change 60mm Magnetic adaptor.1 x Drill adaptor - 1/4in Hex to 1/4in Square x 50mm.
£ 32.99 32.99 GBP
Screwdriver Bit Set, 32 Piece
This Faithfull Screwdriver Bit Set is a useful addition to any toolkit. The 30 screwdriver bits are made from S2 steel and include the most popular types and sizes. Also included is a square drive adaptor and a quick-release holder. Contains:7 x 25mm Pozi Bits: PZ0, PZ1, PZ2 (x4), PZ34 x 25mm Phillips Bits: PH0, PH1, PH2, PH35 x 25mm Slotted Bits: 3, 4, 5, 6, 7mm7 x 25mm Hex Bits: 2, 3, 4, 5, 6, 7, 8mm7 x 25mm TORX (Star) Security Bits: TTX10, TTX15, TTX20, TTX25, TTX27, TTX30, TTX401 x 1/4in Hex to 1/4in Square Drive Adaptor1 x 1/4in Quick-Release Magnetic Ejector Bit Holder Supplied in a sturdy plastic case.
£ 15.42 15.42 GBP
Quick-Change S2 Security Bit Set, 25 Piece
The Faithfull Quick-Change Security Bit Set is a useful addition to any toolkit and contains 24 of the most popular 1/4in hex drive screwdriver bit types, including 18 of the most common security fixings used in industry on appliances and toys. Manufactured from hard-wearing S2 steel, these bits provide a long working life. Used in conjunction with the quick-release magnetic bit holder, they can be swiftly changed without the need to open the drill chuck. The set is supplied in a sturdy impact resistant plastic storage case. Contains: 3 x 25mm Pozidriv Bits: PZ1, PZ2 PZ33 x 25mm Phillips Bits: PH1, PH2 PH35 x 25mm Spanner Bits: 4, 6, 8, 10 12mm7 x 25mm Star Security Bits: T10S, T15S, T20S, T25S, T27S, T30S T40S6 x 25mm Hex Security Bits: 2, 2.5, 3, 4, 5 61 x Quick-Release Magnetic 1/4in Hex Drive
£ 14.79 14.79 GBP
Quick-Change Bit Set, 25 Piece
The Faithfull Quick Change Bit Set is a useful addition to any toolkit, containing 24 of the most popular bit types. These screwdriver bits have been manufactured from hard-wearing S2 steel to provide a long working life and, when used in conjunction with the quick-release magnetic bit holder, they can be swiftly changed without the need to open the drill chuck. Supplied in a sturdy plastic storage case. Contains: 8 x 25mm Pozi Screwdriver Bits: PZ1(2), PZ2(3) PZ3(3)3 x 25mm Phillips Screwdriver Bits: PH1, PH2 PH33 x 25mm Slotted Screwdriver Bits: 4, 5.5 6.5mm4 x 25mm Hexagonal Screwdriver Bits: 3, 4, 5 66 x 25mm Star Screwdriver Bits: T10, T15, T20, T25, T30 T401 x 1/4in Quick-Release Magnetic Ejector Bit Holder
£ 14.57 14.57 GBP
Diamond Bit Set S2 Torsion, 10 Piece
This Faithfull Diamond Bit Set contains the six most popular 1/4in drive hex screwdriver bits and a quick release magnetic bit holder. The bits are manufactured from S2 steel and have a coating of minute diamond particles on their tip to bite into the screw head and provide extra grip. This helps to prevent accidental slipping or cam out that can cause damage when screwdriving.The set is supplied in a sturdy, flip down storage case. Contains: 1 x Slotted screwdriver bit: 5mm.6 x Pozidriv screwdriver bits: PZ1 (2), PZ2 (4).2 x Star screwdriver bits: T30.1 x 1/4in Drive stainless steel magnetic bit holder 60mm.
£ 15.90 15.9 GBP
DT7944 Screwdriver Bit Set, 31 Piece
The DEWALT DT7944 31 Piece Screwdriver Bit Set is supplied in a sturdy plastic re-usable storage container. The bits feature a flexible torsion zone which absorbs torque peaks, and reduces breakage. Contains:6 x 25mm Pozidriv Bits: PZ1(x2), PZ2(x3) and PZ3.5 x 25mm Phillips Bits: PH1(x2), PH2(x2) and PH3.3 x 25mm Slotted Bits: 4.5, 5.5 and 6.5mm.12 x 25mm TORX Bits: TX10(x2), TX15(x2), TX20(x2), TX25(x2), TX30(x2) and TX40(x2).4 x 25mm Hex Bits:3, 4(x2) and 5mm.1 x Quick change magnetic bit tip holder.
£ 52.44 52.44 GBP
DT7916 Screwdriver Bit Set, 11 Piece
The DEWALT DT7916; Screwdriver Bit Set includes a selection of tough, professional quality screwdriver bits. The bits have a hardened core for strength and durability with 'Extra Grip' ribs to grip the screw and reduce slippage. Contains: 3 x 25mm Phillips Bits: PH1, PH2 and PH3.3 x 25mm Pozidriv Bits: PZ1, PZ2 and PZ3.4 x 25mm TORX Bits: TX10, TX15, TX20 and TX25.1 x Magnetic Bit Holder.
£ 24.32 24.32 GBP
DT7508 1/2in Drive to 1/4in Hex Impact Adaptor
The DEWALT DEWDT7508 impact adaptor has a hardened core for extra strength and durability and a flexible Torsion Zone absorbs torque peaks and reduces breakage (Torsion bits only). The impact adaptor has the following dimensions:1/2in (12.7mm) x 1/4in (6.35mm)
£ 18.40 18.4 GBP
DT7227 Torsion Bits PZ3 x 50mm (Pack 5)
DEWALT DT7227 Torsion Bits PZ3 x 50mm, pack of 5.They have a hardened core for extra strength and durability. The flexible torsion zone absorbs torque peaks and reduces breakage (Torsion bits only).The design features extra grip ribs gripping the screw and reduce slipping (specific bits only).They are tough quality, professional screwdriver bits. Specifications: Size: PZ3.Length: 50mm.Pack Quantity: 5.
£ 12.33 12.33 GBP
DT7226 Torsion Bits PZ2 x 50mm (Pack 5)
DEWALT DT7226 Torsion Bits, PZ2 x 50mm, in a pack of 5, have a hardened core for extra strength and durability. The flexible torsion zone absorbs torque peaks and reduces breakage (Torsion bits only). The design features extra grip ribs gripping the screw and reduce slipping (specific bits only).They are tough quality, professional screwdriver bits. Specifications: Size: PZ2.Length: 50mm.Pack Quantity: 5.
£ 12.33 12.33 GBP
DT70746T FLEXTORQ Screwdriving Set, 34 Piece
The DEWALT DT70746T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:4 x 25mm Phillips Bits: PH1, PH2(x2) and PH3.8 x 25mm Pozidriv Bits: PZ1, PZ2(x5) and PZ3(x2).2 x 25mm TORX Bits: TX20 and TX25.3 x 57mm Phillips Bits: PH1 and PH2(x2).13 x 57mm Pozidriv Bits: PZ1, PZ2(x10) and PZ3(x2).3 x 57mm TORX Bits: TX20(x2) and TX25.1 x Aluminium Magnetic Sleeve./p>
£ 51.35 51.35 GBP
DT70745T FLEXTORQ Screwdriving Set, 31 Piece
The DEWALT DT70745T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:1 x 25mm Phillips Bit: PH2.1 x 25mm Pozidriv Bit: PZ2.10 x 25mm TORX Bits: TX10, TX15(x2), TX20(x4), TX25(x2) and TX30.2 x 25mm TORX Security Bits: TTX20 and TTX25.1 x 57mm Phillips Bit: PH2.1 x 57mm Pozidriv Bit: PZ2.14 x 57mm TORX Bits: TX10(x2), TX15(x3), TX20(x5) and TX25(x4).1 x Magnetic Bit Tip Holder with Torsion Zone.
£ 51.19 51.19 GBP
DT70744T FLEXTORQ Screwdriving Set, 25 Piece
The DEWALT DT70744T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:2 x 25mm Phillips Bits: PH2(x2).3 x 25mm Pozidriv Bits: PZ2(x2) and PZ3.10 x 25mm TORX Bits: TX10, TX20(x2), TX25(x5) and TX30(x2).1 x 57mm Phillips Bit: PH2.1 x 57mm Pozidriv Bit: PZ2.4 x 57mm TORX Bits: TX15, TX20(x2) and TX25.2 x 89mm TORX Bits: TX20 and TX25.1 x Cleanable Socket Driver 8mm.1 x Compact Magnetic Drive Guide with Torsion Zone.
£ 52.20 52.2 GBP
DT70742T FLEXTORQ Screwdriving Set, 33 Piece
The DEWALT DT70742T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:7 x 25mm Phillips Bits: PH1, PH2(x5) and PH3.12 x 25mm Pozidriv Bits: PZ1(x2), PZ2(x8) and PZ3(x2).9 x 25mm TORX Bits: TX10(x2), TX15, TX20(x3), TX25(x2) and TX30.1 x 57mm Phillips Bit: PH2.1 x 57mm Pozidriv Bit: PZ2.2 x Socket Drivers: 8 and 10mm.1 x Compact Magnetic Drive Guide with Torsion Zone.
£ 69.18 69.18 GBP
DT70739T FLEXTORQ Screwdriving Set, 31 Piece
The DEWALT DT70739T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:3 x 25mm Phillips Bits: PH2(x2) and PH3.9 x 25mm Pozidriv Bits: PZ1, PZ2(x7) and PZ3.2 x 25mm TORX Bits: TX20 and TX25.4 x 57mm Phillips Bits: PH1 and PH2(x3).9 x 57mm Pozidriv Bits: PZ1, PZ2(x7) and PZ3.3 x 57mm TORX Bits: TX20, TX25 and TX30.1 x Magnetic Bit Holder with Torsion Zone.
£ 51.23 51.23 GBP
DT70738T FLEXTORQ Screwdriving Set, 31 Piece
The DEWALT DT70738T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:1 x 25mm Phillips Bit: PH1.1 x 25mm Pozidriv Bit: PZ2.10 x 25mm TORX Bits: TX10, TX15, TX20(x4), TX25(x3) and TX30.2 x 25mm TORX Security Bits: TTX20 and TTX25.1 x 57mm Phillips Bit: PH2.1 x 57mm Pozidriv Bit: PZ2.14 x 57mm TORX Bits: TX10(x2), TX15(x2), TX20(x6) and TX25(x4).1 x Magnetic Bit Holder with Torsion Zone.
£ 59.10 59.1 GBP
DT70737T FLEXTORQ Screwdriving Set, 31 Piece
The DEWALT DT70737T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:4 x 25mm Phillips Bits: PH1, PH2(x2) and PH3.8 x 25mm Pozidriv Bits: PZ1, PZ2(x6) and PZ3.2 x 25mm TORX Bits: TX20 and TX25.4 x 57mm Phillips Bits: PH1 and PH2(x3).9 x 57mm Pozidriv Bits: PZ1, PZ2(x6) and PZ3(x2).3 x 57mm TORX Bits: TX20(x2) and TX25.1 x Magnetic Bit Holder with Torsion Zone.
£ 58.99 58.99 GBP
DT70734T FLEXTORQ Screwdriving Set, 29 Piece
The DEWALT DT70734T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:5 x 25mm TORX Bits: TX10, TX15, TX20, TX25 and TX30.2 x 25mm TORX Security Bits: TTX20 and TTX25.1 x 57mm Phillips Bit: PH2.2 x 57mm Pozidriv Bits: PZ2 and PZ3.18 x 57mm TORX Bits: TX10(x2), TX15(x3), TX20(x7), TX25(x5) and TX30.1 x Aluminium Magnetic Sleeve.
£ 55.70 55.7 GBP
DT70733T FLEXTORQ Screwdriving Set, 38 Piece + Safety Glasses
The DEWALT DT70733T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. One pair of Tinted Safety Glasses are included. Contains:2 x 25mm Phillips Bits: PH1 and PH3.2 x 25mm Pozidriv Bits: PZ2 and PZ3.24 x 25mm TORX Bits: TX10(x3), TX15(x4), TX20(x8), TX25(x6), TX30(x2) and TX40.1 x 57mm Phillips Bit: PH2.1 x 57mm Pozidriv Bit: PZ2.3 x 57mm TORX Bits: TX15, TX20 and TX25.1 x 89mm TORX Bit: TX20.1 x 1/4in Hex to 1/4in Square Adaptor.1 x 1/4in Hex to 3/8in Square Adaptor.1 x Cleanable Socket Driver 8mm.1 x Bit Tip Holder.
£ 46.00 46.0 GBP
DT70731T FLEXTORQ Screwdriving Set, 37 Piece
The DEWALT DT70731T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:1 x 25mm Slotted Bit: 4-6mm.5 x 25mm Phillips Bits: PH1, PH2(x3) and PH3.13 x 25mm Pozidriv Bits: PZ1(x2), PZ2(x8) and PZ3(x3).2 x 25mm TORX Bits: TX20 and TX25.1 x 25mm TORX Security Bit: TTX25.2 x 57mm Phillips Bits: PH2(x2).7 x 57mm Pozidriv Bits: PZ1, PZ2(x5) and PZ3.2 x 57mm TORX Bits: TX20 and TX25.1 x 89mm Phillips Bit: PH2.1 x 89mm Pozidriv Bit: PZ2.1 x Compact Magnetic Drive Guide with Torsion Zone.1 x Aluminium Magnetic Sleeve.
£ 33.10 33.1 GBP
DT70730T FLEXTORQ Screwdriving Set, 25 Piece
The DEWALT DT70730T FLEXTORQ™ Screwdriving Set contains a selection of EXTREME FlexTorq™ screwdriving bits engineered for longer life. The built-in torsion zone has been designed to absorb and control high-impact forces, transferring them into the optimised geometry of the bit tip. Reducing the load on the driver and fastener, means secure fixing with longer life. The full fit head eliminates wobble and screw head rounding. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains:1 x 25mm Slotted Bit: 6mm.8 x 25mm Pozidriv Bits: PZ2(x7) and PZ3.6 x 25mm TORX Bits: TX20(x2) and TX25(x4).2 x 57mm Phillips Bits: PH2(x2).3 x 57mm Pozidriv Bits: PZ2(x2) and PZ3.1 x 89mm Phillips Bit: PH2.1 x 89mm Pozidriv Bit: PZ2.1 x 89mm TORX Bit: TX20.1 x Compact Magnetic Drive Guide with Torsion Zone.1 x Cleanable Socket Driver: 8mm.
£ 52.20 52.2 GBP
DT70561T Impact Torsion Set + 3in Holder, 34 Piece
The DEWALT DT70561T Impact Torsion Set contains a wide selection of impact rated bits. These CNC accurately designed bits with a torque zone that absorbs the highlights in the torque, allowing optimal bit flexibility for maximum life in more demanding applications. Selected by professional users for maximum fastness and accessibility, with no reduction in performance. The bit holder combines the 10-times-so-powerful MagLock system with ease of use, versatile products like an Aluminium Screw Lock case for use with 50mm screwdrivers, 85mm bit tip holder with removable cover for use with 25mm bits. Supplied in a convenient TOUGH CASE storage box. Contains: 5 x 25mm Phillips Bits: PH1, PH2(x3) and PH3.9 x 25mm Pozidriv Bits: PZ1, PZ2(x7) and PZ3.2 x 25mm TORX Bits: TX20 and TX25.1 x 25mm Slotted Bit: 4-6mm. 6 x 50mm Phillips Bits: PH1(x2) and PH2(x4).8 x 50mm Pozidriv Bits: PZ1(x2) and PZ2(x6).2 x 50mm TORX Bits: TX20 and TX25. 1 x Magnetic Bit Holder.
£ 105.49 105.49 GBP
DT70547T Aluminium Magnetic Screwlock Sleeve for Impact Torsion Bits 50mm
The DEWALT DT70547T Aluminium Magnetic Screwlock Sleeve has been precisely CNC machined with a torsion zone to absorb peaks in torque. This allows optimum bit flex for maximum life in impact/high torque applications. It has a specially designed bit tip which optimises the fit into the fastener and eliminates wobble and stripped screws. Preferred by professional users for excellent hold, reach, stability and accessibility in all screwdriving applications even the most awkward to reach. The aluminium screw lock sleeve is for use with 50mm torsion bits.
£ 7.78 7.78 GBP
DT70545T Extreme Impact Torsion Set, 34 Piece
The DEWALT DT70545T contains bits that are specially-designed to have an increased life, the Optimized Torsion Zone allows the bit to flex rather than break, even when used in extreme applications. The contoured area of the tip flexes to absorb the torque of the impact driver. Contains:5 x 25mm Pozidriv Bits: PZ1, PZ2(x3) and PZ3.3 x 25mm Phillips Bits: PH1, PH2 and PH3.16 x 50mm Pozidriv Bits: PZ1(x3) and PZ2(x13).7 x 50mm Phillips Bits: PH1(x2) and PH2(x5).2 x 50mm TORX Bits: TX20 and TX25.1 x Magnetic Sleeve.
£ 106.54 106.54 GBP
DT70512T Impact Torsion Screwdriver Bit Set, 14 Piece
The DEWALT DT70512T Impact Torsion Screwdriver Bit Set contains a selection of high performance impact torsion bits that have been designed for use with impact drivers. Preferred by professional users for maximum hold, tight access and no run out. The CNC precisely machined bits have a torsion zone that absorbs peaks in torque allowing optimum bit flex for maximum life in tough Impact or High Torque industrial applications. The bit holder features a magnetic screw lock system that is 10x stronger than the average holder, with an aluminium screw lock sleeve for use with torsion bits 50mm and above. Plus an 85mm bit tip holder with removable sleeve for use with 25mm bits and a compact rapid load for use with bits 25mm and above. Both provide excellent hold, reach, stability and accessibility in all screwdriving applications, even the most awkward to reach. Supplied in a compact bit case to safely store screwdriver bits and long and short magnetic screw guides. Contains:3 x 25mm Phillips Bits: PH1, PH2 and PH3.5 x 25mm Pozidriv Bits: PZ1, PZ2(x3) and PZ3.1 x 25mm Slotted Bit: SL6.3 x 25mm TORX Bits: TX20, TX25 and TX30.1 x Compact Magnetic Drive Guide.1 x Long Magnetic Drive Guide.
£ 18.86 18.86 GBP
Hex to Square Drive Adaptor Set, 3 Piece
The Faithfull set of 3 hex to square drive adaptors. It converts any 1/4in Hex Drive or Drill Chuck to accommodate 1/4, 3/8, or 1/2in Drive sockets. Contains:1/4, 3/8 and 1/2in Square Drive.
£ 7.95 7.95 GBP
Single Pocket Hole Jig
The Trend PH/JIG/BS Single Pocket Hole Jig is for fast and accurate joining of solid timber and plywood giving strong instant joints in single or multiple fixing positions. It can help to build cabinets, furniture and small joinery projects with ease. The hardened drilling sleeves provide accurate, consistent pockets. There is also a handy built-in drill depth gauge that can be reversed for new or repair work. Works with timber thicknesses from 12mm to 38mm. Portable and adaptable. Supplied with: 1 x Pack of Assorted Screws, 1 x 150mm Square Drive Bit and 1 x HSS Drill Bit with Collar.
£ 51.80 51.8 GBP
KWJ/Pin/4 Pins 10mm (4 Pack)
This pack contains 4 spare location pins, which are suitable for the KWJ700 and KWJ900 worktop jigs. Made from ABS plastic for strength.
£ 16.41 16.41 GBP
KWJ900 Kitchen Worktop Jig 900mm
Tradesman ALL IN ONE work top jig for up to 900 mm worktops. Hard wearing solid laminate 12 mm thick jig that cuts both parts of the joint in 15-minutes including setting up and left hand and right hand corners, 400 mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100 mm radius corner, 40 mm radius corner, 35 mm kitchen door hole and 3/4 inch BSP hole for mixer taps. It covers fixed lengths for 400 mm, 500 mm, 550 mm, 600 mm, 616 mm, 650 mm, 700 mm and 900 mm wide worktops and can cuts up to 40 mm thick worktops with or without anti-drip postformed edge. Three open-ended bolt recesses (dog bone style) for 150 mm bolts. Engraved lines for short 65 mm bolts and worktop cross-cut. 10 mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Engraved markings for identification of pin holes. Specification:Length: 1185 mm. Width: 390 mm. Thickness: 12 mm. Weight: 7.7 Kg. End cut: 45 degrees. Corner radius: 40 mm. Corner radius: 100 mm. Corner radius: 400 mm. Corner mitre joint: 45 degrees.
£ 227.41 227.41 GBP
Kitchen Worktop Jig with Peninsular Cut 650mm
Trend Kitchen Worktop Jig for worktops up to 650mm. Made from hard-wearing, CNC machined Compact Grade High-Pressure Laminate, 12mm thick. Cuts both parts of the joint in 15 minutes, including setting up. For cutting: left and right-hand corners, 400mm radius peninsular joint and 35mm kitchen door hole. With fixed lengths for 600mm, 616mm, 635mm and 650mm wide worktops. Cuts worktops up to 40mm thick, with or without anti-drip postformed edge. It can also be used to cut 2 open ended bolt recesses (dog bone style) for 150mm bolts. 10mm plastic pins with tapered shoulders for tight fit provides 3-point pin contact to ensure ease of setting up. The pins are made from ABS plastic for strength.
£ 127.92 127.92 GBP
CraftPro Folding Sharpening Stone
The Trend CR/DWS/F4/FC is a 4 inch double sided diamond stone with folding handle and monocrystalline diamonds for fast, clean, stock removal which gives excellent sharpening performance. It is double sided for coarse sharpening and fine honing: Coarse 360 grit (nom. 40 microns) and fine 600 grit (nom. 25 microns). The Coarse is ideal for carpentry as it rapidly fixes or restores a damaged edge or blunt tools, including chisels and plane irons. The Fine is ideal for cabinet making for a fine finish and refines the cutting edges of chisels, small knives, etc - achieves a razor edge in seconds. With plastic ABS folding handle, that folds to protects diamond surface and oval holes design to collect and hold metal residue. Ideal for saw blades, chisels, knives, domestic and garden tools. Recommended use with Trend lapping fluid to prevent clogging or rusting and assist in keeping tools clean.
£ 34.26 34.26 GBP
Router Bit Set for Worktop Jig, 4 Piece
This Faithfull 4 Piece Router Bit Set is for use with kitchen worktop jigs. Tungsten carbide bits suitable for all routers with 1/2in collet. Contains: 3 x 1/2in Shank Straight: 12.7mm x 60mm, 12.7mm x 50mm(x2).1 x 1/4in Shank Flush Trim: 12.7mm x 25.4mm.
£ 31.96 31.96 GBP
1/2in TCT Router Bit Set, 35 Piece
The Faithfull 35 Piece Router Bit Set with 1/2in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank Diameter: 12.7mm (1/2in) Contains: 1 x Straight: 3.2 x 14mm.1 x Straight: 6.5 x 20mm.1 x Straight: 10 x 25mm.1 x Straight: 12.7 x 20mm.1 x Straight: 12.7 x 25mm.1 x Straight: 19 x 20mm.1 x Dovetail: 12.7 x 8mm.1 x Dovetail: 15.0 x 12mm.1 x Panel Pilot: 6.5 x 30mm.1 x Guided Flush Trimmer: 10 x 13mm.1 x Guided Flush Trimmer: 10 x 25mm.1 x Guided Flush Trimmer: 12.7 x 12mm.1 x Guided Flush Trimmer: 12.7 x 25mm.1 x Guided Flush Trimmer: 19.1 x 25mm.1 x Mortising Cutter: 12.7 x 13mm.1 x Core Box: R3.2mm, 7 x 6mm.1 x Core Box: R6.3mm, 12.7 x 8mm.1 x Core Box: R6.3mm, 12.7 x 20mm.1 x 90 V-Groove: 12.7 x 10mm.1 x 45 Guided Chamfer: 30 x 14mm.1 x Guided Cove: R6.35mm, 25 x 10mm.1 x Guided Cove: R9.5mm, 30 x 14mm.1 x Guided Rabbeting Cutter: 30 x 6.5mm.1 x Guided Rabbeting Cutter: 30 x 8mm.1 x Guided Rabbeting Cutter: 30 x 10mm.1 x Guided Classical Cove: R8mm, 30 x 15mm.1 x Guided Wave Edge: 30 x 18mm.1 x Guided Beading: R12.7mm, 37 x 20mm.1 x Guided Double Roman: 32 x 14mm.1 x Guided Double Roman: 36 x 19mm.1 x Guided Roman Ogee: 25 x 12mm.1 x Guided Roman Ogee: 36 x 16mm.1 x Guided Rounding: R6.5mm, 25 x 12mm.1 x Guided Rounding: R10mm, 32 x 16mm.1 x Guided Rounding: R12.7mm, 36 x 20mm.
£ 113.31 113.31 GBP
1/4in TCT Router Bit Set, 30 Piece
The Faithfull 30 Piece Router Bit Set with 1/4in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 6.3mm (1/4in). Contains: 1 x Straight: 5.0 x 12mm.1 x Straight: 6.0 x 20mm.1 x Straight: 8.0 x 20mm.1 x Straight: 10.0 x 20mm.1 x Straight: 12.0 x 20mm.1 x Straight: 14.0 x 20mm.1 x Straight: 16.0 x 20mm.1 x Straight: 18.0 x 20mm.1 x Straight: 20.0 x 20mm.1 x Dovetail: 12.7 x 13mm.1 x 90 V-Groove: 9.5 x 9mm.1 x 90 V-Groove: 12.7 x 9mm.1 x Core Box: R3.2mm, 6.0 x 6mm.1 x Core Box: R6.3mm, 12.7 x 10mm.1 x Classical Panel: 12.7 x 9mm.1 x Guided Flush Trimmer: 12.7 x 13mm.1 x 25 Guided Chamfer: 16.0 x 9mm.1 x 45 Guided Chamfer: 32.0 x 13mm.1 x Roman Ogee: R4mm, 25.0 x 12mm.1 x Guided Rabbeting Cutter: 28.6 x 13mm.1 x Guided Cove: R6.3mm, 22.0 x 12mm.1 x Guided Cove: R9.5mm, 28.0 x 12mm.1 x Guided Round Over: R3.2mm, 15.0 x 7mm.1 x Guided Round Over: R6.3mm, 22.0 x 12mm.1 x Guided Round Over: R7.9mm, 25.0 x 14mm.1 x Guided Round Over: R9.5mm, 28.0 x 14mm.1 x Guided Beading: R3.2mm, 16.0 x 8mm.1 x Guided Beading: R6.5mm, 22.0 x 12mm.1 x Guided Beading: R7.9mm, 25.0 x 14mm.1 x Guided Beading: R9.5mm, 28.0 x 15mm.
£ 82.74 82.74 GBP
1/2in TCT Router Bit Set, 15 Piece
The Faithfull 15 Piece Router Bit Set with 1/2in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 12.7mm (1/2in). Contains: 1 x Straight: 3.2 x 14mm.1 x Straight: 6.5 x 20mm.1 x Straight: 12.7 x 25mm.1 x Straight: 19.0 x 20mm.1 x Dovetail: 12.7 x 8mm.1 x Panel Pilot: 6.5 x 30mm.1 x Guided Flush Trimmer: 12.7 x 12mm.1 x Mortising Cutter: 12.7 x 13mm.1 x Core Box: R3.2mm, 7 x 6mm.1 x 90 V-Groove: 12.7 x 10mm.1 x 45 Guided Chamfer: 30 x 14mm.1 x Guided Cove: R9.5mm, 30 x14mm.1 x Guided Rabbeting Cutter: 30 x 10mm.1 x Guided Roman Ogee: 25 x 12mm.1 x Guided Rounding: R10mm, 32 x 16mm.
£ 48.67 48.67 GBP
1/4in TCT Router Bit Set, 12 Piece
The Faithfull 12 Piece Router Bit Set with 1/4in shank. Tungsten Carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 6.3mm (1/4in). Contains: 1 x Dovetail: 12.7 x 13mm.1 x Straight: 6 x 20mm.1 x Straight: 12 x 20mm.1 x Straight: 16 x 20mm.1 x Flush Trim: 12.7 x 13mm.1 x Rounding Over: R7.9mm, 25 x 14mm.1 x Rounding Over: R9.5mm, 28 x 14mm.1 x Roman Ogee: R4mm, 25 x 12mm.1 x Core Box: R6.3mm, 12.7 x 10mm.1 x Cove: R6.3mm, 22 x 12mm.1 x 45 Chamfer: 32 x 13mm.1 x 90 V-Groove: 12.7 x 9mm.
£ 36.76 36.76 GBP
£ 10.41 10.41 GBP
Morse Taper Arbor 4MT Series 6JT Arbor
These Rohm 4MT Series precision machined and ground Morse Taper 6JT Arbors, for mechanism performance, are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, are used on lathes and pillar drills for mounting 3 jaw chucks.Made from high-quality tool steel. Specifications: Size/Type: 4MT/6JT.
£ 36.80 36.8 GBP
Morse Taper Arbor 4MT Series 3JT Arbor
These Rohm 4MT precision machined and ground Morse Taper 3JT Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 4MT/3JT.
£ 36.80 36.8 GBP
Morse Taper Arbor 3MT Series 6JT Arbor
These Rohm 3MT Series precision machined and ground Morse Taper 6JT Arbors are for mechanism performance, and are ideal for use with custom tool and work holder designs. For use adapting Jacobs taper mounted chucks to morse taper spindles, and used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 3MT/6JT.
£ 26.46 26.46 GBP
Morse Taper Arbor 3MT Series 33T Arbor
These Rohm 3MT precision machined and ground Morse Taper 33T Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks.Made from high-quality tool steel. Specifications: Size: 3MT/33T.
£ 26.46 26.46 GBP
Morse Taper Arbor 2MT Series 6JT Arbor
These Rohm 2MT precision machined and ground Morse Taper 6JT Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 2MT/6JT.
£ 19.84 19.84 GBP
Morse Taper Arbor 2MT Series 33JT Arbor
These Rohm precision machined and ground Morse Taper Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 3MT/33JT.
£ 19.84 19.84 GBP
Morse Taper Arbor 2MT Series 3JT Arbor
These Rohm 2MT precision machined and ground Morse Taper 3JT Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks.Made from high-quality tool steel. Specifications: Size/Type: 2MT/3JT.
£ 19.84 19.84 GBP
Morse Taper Arbor 2MT Series 2JT Arbor
These Rohm 2MT precision machined and ground Morse Taper 2JT Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks.Made from high-quality tool steel. Specifications: Size/Type: 2MT/2JT.
£ 19.84 19.84 GBP
Morse Taper Arbor 2MT Series 1JT Arbor
These Rohm 2MT precision machined and ground Morse Taper 1JT Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 2MT/1JT.
£ 19.84 19.84 GBP
Morse Taper Arbor 1MT Series 1JT Arbor
These Rohm 1MT Series precision machined and ground Morse Taper 1JT Arbors, are for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 1MT/1JT.
£ 15.92 15.92 GBP
QUICK LTX Angle Attachment
Quick change angle attachment for drilling and screwdriving in the narrowest of spaces and up to forces of 100Nm. Ideal for drilling at right angles through joists for laying pipe work. Attachment rotates 360?. For use with BS/SB18 LTX Quick and BS/SB18 LTX Quick brushless models.
£ 82.80 82.8 GBP
DWE74912 Scissor Leg Stand for DWE7491
The DEWALT DWE74912 Scissor Leg Stand is for use with the DWE7491 table saw. It enables easy transportation, and then set up on the actual jobsite.Specification: Weight: 6.8kg. (15lbs).
£ 110.40 110.4 GBP
Impact Torsion Screwdriving Set, 15 Piece
The DEWALT Impact Torsion Screwdriving Set features CNC precisely machined bits with a torsion zone to absorb peaks in torque. The set allows optimum bit flex for maximum life in Impact/High Torque applications.The 15 piece set has a longer life, faster, more accurate screw driving thanks to a specially designed bit tip which optimises the fit into the fastener and eliminates wobble and stripped screws.Preferred by professional users for maximum hold, tight access, and no run out.Supplied in a Magnetic Tough Case. Contains:3 x 25mm Phillips Bits: PH1, PH2, PH3.4 x 25mm Pozidriv Bits: PZ1, PZ2(2), PZ3.2 x 25mm TORX Bits: T20, T25.2 x 50mm Phillips Bits: PH2, PH3.3 x Socket Drivers: 7mm, 8mm, 10mm.1 x Magnetic Bit Tip Holder.
£ 56.54 56.54 GBP
DT71517T-QZ Right Angle Torsion Drill Attachment
The DEWALT DT71517T-QZ Right Angle Torsion Drill Attachment is durable and has a compact design that allows it to fit in tight spaces where work is difficult to perform and is perfect for driving screws and drilling holes at awkward angles. It is ideal for cordless drills and accepts standard 1/4in hex shank accessories. Torsion bits have a Flexible Torsion Zone that absorbs torque peaks and reduces breakage. Includes the following: 3 x 25mm Pozidriv Bits: PZ2.2 x 25mm Phillips Bits: PH2.4 x 25mm Torx Bits: T10, T15, T20 T25.
£ 65.96 65.96 GBP
DEWDE7400-XJ Heavy-Duty Rolling Table Saw Stand
The DEWALT DE7400-XJ Rolling Table Saw Stand is fitted with large heavy-duty wheels designed to easily roll over steps, kerbs, and jobsite debris. The folding legs are fitted with quick release levers which retract under the stand in a few seconds for easy and quick transport.The stand is made from lightweight aluminium, which improves the portability.The heavy-duty kick stand allows it to balance upright for mobility and storage, and there is also a retractable soft grip handle that slides out, allowing the user to pull the saw behind him comfortably.The design allows portability when the table saw is attached to the stand, increasing productivity. Perfect for correct height and stability, for all applications, as well as ripping skirting, sheet material and roofing timbers on site.Supplied with universal brackets which attach to most table saws.
£ 145.36 145.36 GBP
DE7260 Mitre Saw Folding Rolling Stand
The DEWALT DE7260 Mitre Saw Folding Rolling Stand has an easily adjustable mounting system that simplifies tool attachment and ensures universal compatibility. It has 2 height settings and is fitted with wide supports that extend up to 2.4m, with a capacity up to 135kg, providing excellent material support. The stand is fitted with pneumatic assists for easy set up and collapse, XL rubber wheels for improved jobsite mobility and no punctures and a kickstand for vertical storage. This compact vertical storage option provides improved mobility and ease of transport. Specification: Max. Load: 135kgMax. Extension: 2.4m
£ 391.92 391.92 GBP
DE7033 Heavy-Duty Short Beam Leg Stand
DEWALT DE7033 Heavy-Duty Short Beam Leg Stand accommodates all DEWALT mitre saws. It has a lightweight aluminium construction that provides portability in and around the jobsite (only 14kg), the 1.1 metre beam extends to support up to 2.5 metres for use with large workpieces and the beam can support up to 227kg. Work stops can be converted into end stops for repetitive cutting to length. Integral folding legs avoid unnecessary assembly and the integrated carry handle provides ease of transportation. Applications include: cutting to length, roofing timbers, all material support requirements, and large workpiece support.Comes with: 2 x work stops / support and mitre saw brackets.
£ 184.00 184.0 GBP
DuraSpin® Collated Screws Fermacel Fibre Board to Wood 3.9 x 30mm (Pack 1000)
Senco DuraSpin Collated Screws for Fermacell board to wood applications. Phillips No.2 drive, black phosphate finish, coarse thread, small head with countersink nibs. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines. Size: 3.9 x 30mm.
£ 21.16 21.16 GBP
16 Gauge Galvanised Finish Nails 64mm (Pack 2500)
1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 64mm
£ 23.33 23.33 GBP
16 Gauge Galvanised Finish Nails 57mm (Pack 2500)
1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 57mm
£ 21.79 21.79 GBP
16 Gauge Galvanised Finish Nails 50mm (Pack 2500)
1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 50mm
£ 20.24 20.24 GBP
16 Gauge Galvanised Finish Nails 45mm (Pack 2500)
1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 45mm
£ 18.68 18.68 GBP
16 Gauge Galvanised Finish Nails 38mm (Pack 2500)
1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 38mm
£ 15.57 15.57 GBP
16 Gauge Galvanised Finish Nails 32mm (Pack 2500)
1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 32mm
£ 14.00 14.0 GBP
16 Gauge Galvanised Finish Nails 25mm (Pack 5000)
1 x Box of 5000 DEWALT 16 Gauge Galvanised Finish Nails 25mm
£ 23.33 23.33 GBP
BSC/20/1000 Biscuits No.20 (Pack 1000)
Trend BSC/20/1000 Biscuits Size: No.20 (60 x 23 x 4mm).Pack Size: 1000.
£ 64.29 64.29 GBP
BSC/20/100 Biscuits No.20 (Pack 100)
Trend BSC/20/100 Biscuits Size: No.20 (60 x 23 x 4mm).Pack Size: 100.
£ 14.61 14.61 GBP
BSC/10/1000 Biscuits No.10 (Pack 1000)
Trend BSC/10/1000 Biscuits Size: No.10 (53 x 19 x 4mm).Pack Size: 1000.
£ 61.84 61.84 GBP
BSC/10/100 Biscuits No.10 (Pack 100)
Trend BSC/10/100 Biscuits Size: No.10 (53 x 19 x 4mm).Pack Size: 100.
£ 14.61 14.61 GBP
BSC/0/100 Biscuits No.0 (Pack 100)
Trend BSC/0/100 Biscuits Size: No.0 (47.5 x 15.5 x 4 mm).Pack Size: 100.
£ 14.61 14.61 GBP
Contract Diamond Blades 115 x 22.2mm (Pack 3)
This Faithfull Contract Diamond Blade has the following specification: Size: 115mmBore Size: 22.2mmPack Quantity: 3
£ 10.56 10.56 GBP
Cassette Cable Reel 240V 13A 4-Socket Thermal Cut-Out White 4m
The Masterplug SCT04134W 240V cassette cable reel has a thermal cut out to stop cable overheating, a safety reset button, 4 sockets and 4 metres of 13 amp arctic cable. When you need a cable reel around the home, this compact cassette cable reel is perfect. This sturdy yet light portable extension lead has a four-metre cable, ideal for use in the home or garden. Manufactured to BS EN 61242.
£ 18.11 18.11 GBP
PRO-XT Open Cable Reel 240V 13A 2-Socket & 2 USB (2.1A Shared) 25m
The Masterplug PRO-XT Open Cable Reel is lightweight and sturdy. This portable cable reel has two shuttered sockets, two USB charging ports, LED indicator, integrated power switch and a safety thermal cut-out for protection against overloading when fully reeled. Designed and engineered for longevity, the plastic drum provides reliable protection when in use, transported or stored. This open cable reel is the professionals choice when it comes to using portable power. Specification: Fully Unwound: 3120W (13A), Fully Wound: 720W (3A)Switch: Double PoleCable Length: 25mCable Size: 1.25mm (H05VV-F)Standards: BS EN 61242. ASTA Approved
£ 63.00 63.0 GBP
PRO-XT Case Cable Reel 240V 13A 4-Socket 15m
The Masterplug PRO-XT Case Cable Reel provides a compact, portable solution with an innovative design. Fixing points in the base allow the reel to be mounted for storage or while in use. The reel features 4 shuttered sockets, LED power indicator and the double pole switch allows you to control the power where you are working. This case reel is perfect for home, garden or workshop use and is ideal for DIY. For your additional safety, a thermal cut-out is integrated into the reel and cuts the power if the reel becomes warm due to overloading when reeled. Specification: Voltage: 240VFully Unwound: 3120W (13A), Fully Wound: 720W (3A)Switch: Double PoleCable Length: 15mCable Size: 1.25mm (H05VV-F)Standards: BS EN 61242. ASTA Approved
£ 41.00 41.0 GBP
PRO-XT Cassette Cable Reel 240V 13A 4-Socket 10m
The Masterplug PRO-XT Cassette Cable Reel is lightweight and portable. It has four shuttered sockets, LED indicator, integrated power switch and a safety thermal cut-out for protection against overloading when fully reeled. The compact nature allows for easy transportation and storage. Specification: Voltage: 240VFully Unwound: 3120W (13A), Fully Wound: 720W (3A)Switch: Double PoleCable Length: 10mCable Diameter: 1.25mm (H05VV-F)Standards: BS EN 61242. ASTA Approved
£ 31.28 31.28 GBP
Extension Lead 240V 6-Gang 13A White 2m
1 x Masterplug Extension Lead 240V 6-Gang 13A White 2m
£ 12.38 12.38 GBP
Heater Transformer 3kVA Continuous Rate
The Faithfull Power Plus TRANHEAT is a 110V vented portable transformer suitable for use with 110V electric heaters or other applications where a continuous load is to be applied. This model has 2 x 110V sockets, one is 16 amp and the other is 32 amp. Safety features include a resettable thermal overload protection function and a heavy-duty rubber cable fitted with BS approved 13 amp rubber plug. The vented steel case conforms to IP20 for water and dust ingress protection. Continuous rating: 3KVA.
£ 312.78 312.78 GBP
Transformer 5kVA Triple Outlet
The Faithfull TRAN5 is designed for use on the worksite, or anywhere where a 110V supply is required, to provide power to industrial powertools. This 110V transformer has 3 outlets 2 x 16 amp and 1 x 32 amp and has a heavy-duty GRP waterproof case which is rated to IP44, making it fully weatherproof and therefore suitable for use in most types of outdoor and worksite conditions. This Faithfull 5 kVA transformer has a great safety features include a re-settable thermal overload protection function and a rubber cable fitted with BS approved 13 amp rubber plug. Not suitable for use on 110V heaters where a continuous load is required.
£ 220.78 220.78 GBP
Transformer 3.3kVA Dual Socket
The Faithfull Power Plus TRAN33A is a 16 amp 3.3kVA Twin Outlet transformer, ideal for site use. It has a heavy-duty GRP weatherproof case which is rated to IP44. It has a resettable thermal overload protection and is fitted with BS approved 13 amp plug. It also includes a unique blue LED Power On indicator, which provides the user with an at a glance confirmation that the unit is live. This model has 2 x 110V 16 amp sockets. NOT suitable for use on 110V heaters where a continuous load is required.
£ 103.67 103.67 GBP
Transformer 1.5kVA Single Outlet
The Faithfull TRAN15 is designed for use on the worksite to provide power to industrial powertools.This single outlet 110V 16 amp transformer has a heavy-duty GRP weatherproof case which is rated to IP44, making it fully weatherproof and therefore suitable for use in most types of outdoor and worksite conditions. This Faithfull 1.5kVA transformer has great safety features that include a resettable thermal overload protection function and a heavy-duty rubber cable fitted with a BS approved 13 amp rubber plug. Not suitable for use on 110V heaters.
£ 95.20 95.2 GBP
Yellow Socket 32A 110V
These Faithfull 110V sockets can be fitted to 110V extension cables for use with Faithfull transformers. The sockets are easy to fit and you can also purchase plugs from the Faithfull range that are compatible. Voltage: 110VAmp: 32AType: BSEN60309 Socket
£ 6.96 6.96 GBP
Festoon Lights 10 ES Bulbs 110V 22m
The Faithfull Festoon Light Set, comes on a 22 metre arctic cable supplied with 10 x ES GLS rough service bulbs (110V), each bulb is protected by a lightweight yellow plastic cage. These festoon lights will provide a very effective solution to illuminating a large area on site by hanging the lights in one room and to another across a landing, etc. Instant light without the possibility of shadows that can be caused by using tripod lighting. Fitted with a 16 amp 110 volt plug. Replacement bulbs are available, FPPSLBA6010W.
£ 71.93 71.93 GBP
Festoon Lights Low Energy 10 LED Bulbs 110V 22m
The Faithfull LED Festoon Light Set, comes with a 22 metre arctic cable supplied with 10 x bulbs (110V), each bulb is protected by a lightweight yellow plastic cage. These festoon lights will provide a very effective solution to illuminating a large area on site by hanging the lights in one room and to another across a landing, etc. Instant light without the possibility of shadows that can be caused by using tripod lighting. Fitted with a 16 amp 110 volt plug. Replacement bulbs are available, FPPSLBA6010W.
£ 95.20 95.2 GBP
Single Tripod Site Light 500W 240V
The Faithfull Single Tripod Site Light offers excellent illumination to suit both commercial and domestic use. Each lamp is constructed from a die-cast body and is equipped with a metal grille to prevent accidental contact with the hot lens and to protect it against damage.Mounted on a sturdy telescopic stand that enables the lamp height to be adjusted between 780mm and 1830mm (31in and 72in). The spread of the tripod feet are independently adjustable to suit uneven terrain. Supplied with C class energy saving halogen tubes which offer a 20% saving on energy. All lamps are fitted with an approved BS plug. Conforms to IP54 for water and dust ingress protection.Faithfull Single Tripod Site Light 500 Watt 240 Volt Version.
£ 36.63 36.63 GBP
Black Plug 13A
Black plug, 240V, 13A. This plug features a sturdy nylon base and cover cap that is manufactured to BS 1363/A.
£ 2.30 2.3 GBP
Cable Reel 240V 10A 4-Socket 10m
Designed to fit comfortably in the hand, this compact cassette reel not only ensures that the cable is fully protected while in storage or transit but also safe while in use, using a thermal overload protection system to prevent overheating damaging the cable. The cable reel feature four shuttered plug sockets, a BS-approved plug and a back grip handle with a rotating winding knob making it easy to wind and to use. Manufactured to Kitemark KM61209. Specifications: Length: 10mAmps: 10Sockets: 4Voltage: 240VMax. Load Fully Unwound: 2400W (10A)Max. Load Fully Wound: 720W (3A) Type: Cassette NOTE: All cable reels should be fully unwound before they are used to carry their recommended maximum load.
£ 22.19 22.19 GBP
Yellow Socket 16A 110V
16A, 110Vcoupling socket for 14mm trailing leads. Voltage: 110VAmp: 16A Conforms to IP44 for water and dust ingress protection.Type: BS EN 60309 Socket.
£ 4.84 4.84 GBP
Extension Lead 240V 4-Gang 13A White 5m
Masterplug Extension Lead eliminates the problem of having more electrical items than sockets available. Great to use in the home as well as in the office. Manufactured to BS 1363-2 Standards. Specification: Number of Gangs: 4Cable Length: 5mFuse: 13 ampColour: WhiteVoltage: 240V
£ 12.62 12.62 GBP
Blue Replacement Plug 16A
Waterproof electrical plug for use with site transformers and trailing leads. Voltage: 240VAmp: 16AType: BS EN 60309 Plug.
£ 3.99 3.99 GBP
BB70-3 Pack Bandsaw Blades For BS250
3 Piece BB70-3 Replacement Bandsaw Blade Set to suit the BS250 Bandsaw. Contains: 1 x 1/4in Blade 6 TPI.1 x 1/2in Blade 6 TPI.1 x 3/8in Blade 6 TPI.
£ 83.96 83.96 GBP
Sabre Saw Blade Set, 15 Piece
The Faithfull Sabre Saw Set contains an assortment of 15 sabre saw blades in 5 popular types and allows the cutting of a wide variety of both wood and metal. These high quality blades are manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform.Contains the following:3 x FAISBS811H Blades: For coarse wood, free of nails, pruning green wood3 x FAISBS617K Blades: For coarse wood, free of nails, pruning green wood and for performing curved cuts/plunge cuts3 x FAISBS1531L Blades: For coarse fast cuts in wood and tree cutting and pruning3 x FAISBS1118BF Blades: For pallet repair, with nails/metal, sheet metal, pipes, aluminium profiles provide a flexible flush cut3 x FAISBS1411D Blades: For the fast cutting of coarse wood wooden panels, boards, plywood, plastic, pruning green wood.
£ 31.35 31.35 GBP

Don't see what you need?

We use over 35 years of experience in the MRO supply sector, enabling us to source and supply the exact product for your project or machinery requirement's, no matter how specialist or common-place it is.

Let Howcroft source it for you

Howcroft Group Latest Content