Pest-Stop Super Rat Mouse Killer Sachets are ready to use, no need to open or touch the bait. Contains difenacoum (legally compliant 25ppm). It has an aniseed scent, highly attractive to rodents. Packed into plastic tubs for freshness and security. Recommended for use with bait station. Directions for use included. Each tub contains 6 x 25g sachets.

This Pest-Stop rat bait station has a larger design specifically to control rat infestations. Highly durable and shock resistant, the unit is completely lockable for child and animal safety. It provides a highly effective method to deal with mouse infestations, and is often the chosen solution for pest control professionals. It provides a highly effective method of dealing with rat infestations, and is often the chosen solution for pest control professionals. Also suitable for attracting and killing mice.

For use with rodenticides, this Pest-Stop bait station has a triangular design, which allows it to be used discreetly in corners of rooms and buildings. Highly durable and shock resistant, the unit is completely lockable for child and animal safety. It provides a highly effective method to deal with mouse infestations, and is often the chosen solution for pest control professionals.

The Pest-Stop Systems Bird Scarer Rods help to keep birds off your property. To do this they rotate in the wind and reflect light. Easy-to-use, simply hang up outside. Ideal for use in gardens, allotments and on balconies. Supplied as a pack of 3.

These Pest-Stop Professional Bird Spikes can be fixed to window sills, ledges, guttering and walls etc. They are excellent at discouraging birds and can prevent birds from landing. Supplied in handy 50cm strips, the Bird Spikes are easy to fit and highly effective. The tough steel spikes are fitted on a strong but flexible plastic base which is easy to cut to required size and easy to fix with screws or glue. Supplied in a pack of 10.

Unibond Aero 360 Moisture Absorber Lavender Garden Refill Tab with a 2-in-1 technology: anti moisture anti odour. The integrated Lavender scent with essential oils provides a fresh, clean scent of Lavender in the air. Aero 360 Moisture Absorber Refills last for approximately 3 months in a 20m room. 2 x 450g Lavender Garden Refill Tabs.

The Unibond Aero 360 Optimum Moisture Absorbing System helps prevent condensation, damp and bad smells, as well as the development of mould and dust mites, which could cause allergies. Ideal for every room inside the home and caravans/boats. No noise and no electricity. Suitable for large rooms up to 20m.

Unibond Aero 360 Moisture Absorber Refills last for approximately 3 months in a 20m room. 2 x 450g Refill Tabs.

The Rustins Sticky Off is ideal for removing gum, glue, labels, sticky tape and adhesives. Suitable for the following surfaces: glass, plastic, metal, wood, worktops and clothes. Simple and easy-to-use. Liberally spray onto the substance you want to remove, then allow a few minutes for Sticky-Off to start working. Gently rub the surface with a clean cloth until the substance is totally removed. Repeat the process if required. Supplied in a handy pump spray bottle. Do NOT USE on leather or rubber.

Marigold Let It Shine! Microfibre Cloths remove over 99% of bacteria, with just water*. Strong and absorbent, these cloths remove dirt, grease and dust with ease - without the need for chemicals. Use wet or dry, they are ideal for deep cleaning, wiping down surfaces and dusting. They come in a pack of 4 colours, so you can assign each cloth to a task/room and are even machine washable. *Removes E. coli and S. aureus from laminate countertops and ceramic tile as tested at a 3rd party lab. Pack of 4 Cloths.

The Marigold Wiper Upper is a super absorbent, multi-purpose cloth with microfibre and anti-bac treatment, it not only picks up dirt and grease with ease but stays hygienic for longer*. It's even machine washable. *Product contains the antibacterial ingredient silver chloride. Reduction in bacteria growth tested by 3rd party lab for S. aureus. Bacteria reduction helps to avoid bad odours and improves hygiene in the cloth. Pack of 2 Cloths in a Box of 12 Packs.

Bar Keepers Friend Power Cream Surface Cleaner is based on the same great formulation as the original Bar Keepers Friend but in an 'easy to squirt' application. It cleans a wide variety of household surfaces, ideal for removing limescale/hard water stains. It has a non-scratch formula making it ideal for cleaning delicate surfaces, such as hobs and oven doors, ceramic and stainless steel sinks and baths, tiles, removing baked-on food and rust from cookware, etc.

The Kew Nilfisk Alto C110.7-5 X-TRA Pressure Washer is a compact and handy sized high-pressure washer for basic outdoor cleaning tasks. It has a lightweight design with integrated wheels making it easy to transport. This machine has a number of functions that cover basic cleaning needs and is used for many jobs around the house and garden. It has a reliable and long lasting universal motor, aluminium pump head and auto start stop. The standard Nilfisk bayonet coupling on the new G1 gun ensures compatibility to all the Nilfisk consumer accessories range. It has on board storage for the gun, lance, nozzles and cable. The Click Clean nozzle system makes it quick and easy to change the nozzles. Quick connection of hose with integrated swivel function. It can also be operated from a standing water source such as a water butt tap. Standard Accessories: 1 x 5m High-Pressure Hose1 x Click Clean Extension Lance1 x Click Clean Powerspeed Nozzle1 x Click Clean Tornado Nozzle1 x Click Clean Foam Sprayer and Bottle1 x 5m Mains Supply Cable1 x Nozzle Jet Cleaning Tool1 x Hose Connector Comes with a 2 year warranty. Extend your warranty to 3 years by registering your product on www.yournilfisk.com within 30 days of purchase. Specification Max. Pressure: 110 barFlow Rate: 440 L/hr.Motor: 1,400WMax. Water Feed Temperature: 40CHose Length: 5mDimensions: 260 x 295 x 660mmWeight: 6.5kg

The Kew Nilfisk Alto Drain Tube Cleaner is compatible with all Kew Domestic Power Washers. This high-pressure Hose comes with a drain nozzle and tube cleaning adaptor. Drain nozzle drives itself down the drain to the obstruction which is then attacked by the high-pressure jet. Ideal for reaching blockages up to 15m underground. Tube attachment has flexible nozzle end to help move around U-Bends etc, in sinks and toilets. Length: 15m.

The Kärcher EasyFix Microfibre Hand Nozzle Cloths are highly absorbent and hard-wearing. Ideal for grease and stubborn dirt located in areas such as bathrooms, kitchens and can even be used on oven doors and hobs. They offer an improved cleaning performance of at least 20% compared to terry cloths.

The Airmaster UFH2TN Upright Fan Heater is constructed from flame-retardant material with a streamline upright design that is stable and versatile. Fitted with an adjustable thermostat offering 3 settings: Normal (Cool Air), Warm (1,000W) or Hot (2,000W) for instant heat. A neon power indicator light shows that the device is working. For added safety it has automatic thermal cut-out, frost watch and Thermo-Guard overheat protection. Thermal link protected to increase element life expectancy. It also has an integrated carrying handle for easier movement around the home or office. Complies to British Safety Standards BS EN 60335-2-30, International Standards IEC 335-2-30. Specification: Input Voltage: 220-240VOutput Rating: 2,000WFrequency: 50HzCable Length: 1.7mClass: 1Dimensions: 250 x 215 x 130mmWeight: 1.0kg

U-Care PVA Synthetic Chamois. Super strong. High absorbency. Dries cars, glass and tiles. Resistant to grease, oil and detergents. Size: 64 x 43cm

High quality, long lasting, super absorbent jumbo sponge. Ideal for washing cars, vans, boats etc. Size: 22 x 12 x 6cm.

Turtle Wax Power Out! Odor-X Whole Car Blast is a whole car fogger which seeks and destroys odours at a molecular level. This one time use product incorporates Odor-X technology, leaving its kinetic new car scent lasting for up to 30 days. It contains 3 key active ingredients that penetrate deeply absorbed odours in fabrics, carpets, headliners and air vents to permanently eliminate unwanted smells. Size: 100ml.

HMMUBSZ1L Underbody Seal has the following specifications:Pack type: Schutz.Size: 1 litre.

HMMUBSA600 Underbody Seal has the following specifications:Pack type: Aerosol.Size: 600ml.

HMMUBS500ML Underbody Seal has the following specifications:Pack type: Tin.Size: 500ml.

HMMUBS25L Underbody Seal has the following specifications:Pack type: Tin.Size: 2.5 litres.

HMMUBS1L Underbody Seal has the following specifications:Pack type: Tin.Size: 1 litre.

HMMSCSBSZ1L Stonechip Shield has the following specifications:Pack type: Schutz.Size: 1 litre.Colour: Black.

The D/ISHA4 is a concentrated all year round protection anti-freezing liquid type with low freezing point, designed for all engine types including full-aluminium ones. This D/ISHA4 S Hook 4.5 litre blue liquid protects the cooling systems against damage by freeze to -36C and corrosion. Also the S Hook D/ISHA4 will keep you car cooler in summer months, so getting all year round protection for a great low price. Antifreeze blue is the optimum composition of top grade ethylene glycol, combined with treated, de-mineralized water and high-performance additive package that prevents formation of rust and scum. The S Hook antifreeze will protect and help to prolong the pump bearing service life, prevent water pump seizure and other rubber parts of the cooling system from dry out and cracking. D/ISHA4 Antifreeze blue is notable for its high heat-transfer capacity, low viscosity, excellent detergency. 4.5 litrePasses BS6580 1992.

The D/ISHA1 is a concentrated all year round protection anti-freezing liquid type with low freezing point, designed for all engine types including full-aluminium ones. This D/ISHA1 S Hook 1litre blue liquid protects the cooling systems against damage by freeze to -36C and corrosion. Also the S Hook D/ISHA1 will keep you car cooler in summer months, so getting all year round protection for a great low price. Antifreeze blue is the optimum composition of top grade ethylene glycol, combined with treated, de-mineralized water and high-performance additive package that prevents formation of rust and scum. The S Hook antifreeze will protect and help to prolong the pump bearing service life, prevent water pump seizure and other rubber parts of the cooling system from dry out and cracking. D/ISHA1 Antifreeze blue is notable for its high heat-transfer capacity, low viscosity, excellent detergency. 1 litrePasses BS6580: 2010

Over time, the build-up of sludge and rust can impair the performance of cooling systems. This can lead to blocked coolant channels and subsequent overheating and increased pressure. Silverhook Radiator Flush effectively clears blockages and removes any sludge and rust accumulation. May be used with all radiator types and is harmless to rubber hoses and gaskets.

U-POL Easy 1 is an easy-to-use, smooth textured, polyester filler for deep repairs. The non-sag formula is ideal for use on vertical or horizontal repairs and its lightweight formula bonds to multiple substrates including galvanised steel, metal and GRP.

The Faithfull Tractor Funnel is a heavy-duty funnel for quickly transferring large volumes of liquid. It is made from high density polyethylene, with a large, easy to fill oblong aperture to accommodate pouring from drums. The funnel is supplied with an integral filter to help remove particulate contamination. It has a tapered spout design with venting ribs to aid fast filling. Funnel aperture: 260 x 170mmSpout diameter: 29mmSpout length: 120mm

The Stanley Tools FatMax Demolition Wrench is made from hardened steel, making it perfect for the toughest jobs. It can be use as a nail puller and pry bar. It also features a dedicated, reinforced strikeface meaning it can be used in conjunction with a hammer.

The Boa Constrictor Strap Wrench is the original and best strap wrench. Useful for many jobs including plumbing, automotive, A/C installation/maintenance, pool, pond and oil filters. Both strength and flexibility are provided by the braided rubber strap, which fits into a slot in the handle of the tool and provides a perfect fit on the work piece. Provides over 2,000lb of pressure without marking the workpiece with a pro use capacity of up to 160mm. Capacity: 10mm (3/8in) to 160mm (6.1/4in)

The worlds original and number one selling strap wrench. Invented by Boa, copied by everyone! The Baby Boa strap wrench is ideal for many applications including plumbing, jobs in the car, workshop or kitchen where a stronger grip and more torque is needed. The reinforced strap enables a wide range of uses on any shaped object. Works on all materials and will not scratch or mark. Provides a strong grip and high leverage. 25 million plus customers cant be wrong! Capacity: 100mm (4in)

The BOA Baby Boa Strap Wrench is used for many plumbing jobs, on cars and irregular shapes and provides over 2,000lb of pressure without marking the workpiece. Both strength and flexibility are provided by the braided rubber strap, which fits into a slot in the handle of the tool and provides a perfect fit on the workpiece. Capacity: 100mm (4in).

The Boa Aluminium Strap Wrench is the original and best strap wrench. Useful for many jobs including plumbing, automotive, A/C installation/maintenance, pool, pond and oil filters. Both strength and flexibility are provided by the braided rubber strap, which fits into a slot in the handle of the tool and provides a perfect fit on the work piece. Provides over 2,000lb of pressure without marking the work piece with a pro use capacity of up to 305mm. Capacity: 10 (3/8in) to 275mm (11in).

The Bahco Adjustable Wrenches have been developed according to the scientific ERGO™ process and are made from high-performance alloy steel with a comfortable non-slip thermoplastic grip handle. The jaw does not fall out even at the maximum opening of the wrench and they are scaled in mm for pre-adjusting and accurate measurement. The head has a 16 angle that provides better accessibility and has a left-handed screw with a reversible jaw for pipe use. The head is chrome plated, precision hardened and anti-corrosion treated. Conforms to the following standards: ISO 6787, DIN 3117, ASME B107.8M - 1996 and BS 6333. Set of 3: 1 x 9070P: Length: 158mm, Capacity: 20mm. 1 x 9071P: Length: 208mm, Capacity: 27mm. 1 x 9072P: Length: 257mm, Capacity: 31mm.

The Stanley 151R is a professional spokeshave which is fully adjustable for depth of cut with twin thumbscrews. Machined from fine grey iron with round bottom. Precision machined bases are suitable for work on any concave surface. Specification Type: Round.Cutter Width: 55mm (2.1/8in).Length: 250mm (10in).

The Stanley 151 is a professional spokeshave which is fully adjustable for depth of cut with twin thumbscrews. Machined from fine grey iron with a flat bottom. Precision machined bases are suitable for work on any convex surface. Type: Flat.Cutter Width: 55mm (2.1/8in).Length: 250mm (10in).

A manually adjustable general-purpose Block plane. Ideal for model makers, craft applications and light-duty jobs. Cutter Width: 35 mm (1.3/8in).Length: 140 mm (5.1/2in).

The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen. This Set of 6 Marples M444 Series Blue Chip Bevel Edge Chisels includes the following: Sizes: 6, 10, 13, 19, 25 32mm (1/4, 3/8, 1/2, 3/4, 1 1.1/4in). Supplied in a wood presentation box.

The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen. This set of 5 Marples M444 Series Blue Chip Bevel Edge Chisels contains sizes:6, 10, 12, 18 25mm (1/4, 3/8, 1/2, 3/4 1in).

The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen. This set of 4 Marples M444 Series Blue Chip Bevel Edge Chisels contains sizes:6, 12, 18 25mm (1/4, 1/2, 3/4 1in).

The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen. This set of 3 Marples M444 Series Blue Chip Bevel Edge Chisels contains sizes:12, 18 25mm (1/2, 3/4 1in).

The Hultafors Set of 4 HDC Heavy-Duty Chisels, that have a perfect ground blade, bevelled at 25 for the best ratio possible between sharpness and durability. It is forged in one piece with an I-beam going all the way through for extreme durability and to maximise the force transmission down to the work piece. The entire chisel including the handle can be positioned flat against the surface for an increased number of applications. The chisel is fitted with a santoprene handle, optimised for both power and precision. Chisels with perfect precision, sharp, heavy duty, and always close at hand. They are ready for tasks requiring extreme strength and precision. They come with a smart holster made from durable PP plastic for increased accessibility, the holster can easily be attached to a belt or on a button. Comes with one of each size: 20, 25, 32, 40mm Each chisel is supplied in a ventilated ABS holster to protect the user and cutting edge during transportatoin.

Hultafors 5 Piece Scandinavian Butt Chisel Set is ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic Deposition (EPD). They are an everyday chisel, sharp, reliable and always at hand. Comes with one of each size: 32mm, 25mm, 18mm, 12mm and 6mm. Each chisel is supplied in a ventilated ABS holster to protect the user and cutting edge during transportation.

The Faithfull FAIWCBS3BC set of three blister carded bevel edge chisels have the following dimensions: Sizes: 13, 19, and 25mm (1/2, 3/4 and 1in) Blade Length: 140mm

The Faithfull No.80 cabinet scraper removes fine shavings from wood to give a very smooth finish. Very useful for smoothing knots, burrs, crossed grain and removing old surface finishes on large areas. Unlike an abrasive it does not produce dust which can clog the grain.The 70mm wide, 1.8mm thick blade is held in a fine grey iron cast body with a machined base. The wing handles allow for comfortable use over long periods. The cut can be changed from coarse to fine by turning the thumbscrew which forces the blade to bend slightly and protrude through the scrapers base.The blade can be easily resharpened with a sharpening stone and a burr turned with a burnishing tool.Replacement blade code: FAISCRAPERRB

The Faithfull No.6 Fore plane performs a dual role between stock removal and truing up long edges or levelling wide boards. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 60mm (2.3/8in).Overall Length: 457mm (18in).

This Faithfull No.5 Bench or 'Jack' Plane has a long base and is used for the initial preparation of rough timber.Made with a quality grey cast iron body for strength and stability with precision ground base, and sides for flatness and squareness. The machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools.Presented in a fine hinged wooden storage case.The blade will require honing before use.Specifications: Blade width: 50mm (2in).Overall length: 355mm (14in).

This Faithfull Plane Set is supplied in 2 zip-up canvas carry bags, designed to protect the planes against damage during transport or when in storage. Provides the essentials you need for planing wood: 1 x No.4 Smoothing Plane, designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 50mm.Overall Length: 250mm. 1 x No.60 1/2 Block Plane has the plane iron set at 13.5. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single-handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain. Cutter Width: 35mm.Overall Length: 160mm.

This Faithfull Plane Set comes in a wooden storage box and provides the essentials you need for planing wood: 1 x No.4 Smoothing Plane, designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 50mm.Overall Length: 250mm. 1 x No.60 1/2 Block Plane with plane iron set at 13.5. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single-handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain. Cutter Width: 35mm.Overall Length: 160mm.

The Faithfull No.3 Finishing Plane is ideal for final finishing of cabinet work and general joinery, precision machined for accurate adjustment. Suitable for both hard and soft woods. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 45mm.Overall Length: 230mm.

The Faithfull Hand Rasp Shaver Tool is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. The lightweight and strong ABS plastic body features a small head to allow fast stock removal in confined spaces. The durable metal rasp blade clicks into place, making its replacement tool-free and fast. Specification: Blade Size: 60 x 40mmOverall Length: 185mm

The Faithfull Hand Rasp Round File is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. This cylindrical rasp features an ABS plastic handle plus a thumb grip at the tip for extra control and is ideal for hole enlargement or contour shaving. Specification: Blade Size: 255 x 17mmOverall Length: 400mm

The Faithfull Hand Rasp Plane is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. The lightweight and strong ABS plastic body is shaped like a plane to allow single or dual handed operation for fast stock removal. The durable metal rasp blade clicks into place, making its replacement tool-free and fast. Specification: Blade Size: 255 x 40mmOverall Length: 270mm

The Faithfull Hand Rasp File is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. The lightweight and strong ABS plastic body design allows this rasp to be used with a single or dual handed operation for fast stock removal. The durable metal rasp blade clicks into place, making its replacement tool-free and fast. Specification: Blade Size: 140 x 40mmOverall Length: 310mm

The Faithfull Hand Rasp Block Plane is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. The lightweight and strong ABS plastic body is shaped like a block plane for easy single handed operation. The durable metal rasp blade clicks into place, making its replacement tool-free and fast. Specification: Blade Size: 140 x 40mm Overall Length: 155mm

A small portable vice with a swivel base and an integral clamp that allows it to be attached to workbenches or table tops. Ideal for clamping smaller woodworking pieces and many other objects, the swivel base also allows the work piece to be rotated through 360. The vice has a 75mm (3in) width jaw with a clamping capacity of up to 55mm (2in). Manufactured from high quality grey iron castings that are machined to close tolerances to ensure a smoothly operating sliding jaw. The main screw features an Acme thread that provides a smooth quick closing jaw action, both the main screw and handle are chrome plated to provide better corrosion resistance, the vice is finished with an attractive Blue enamelled coating.Ideal for use by DIY enthusiasts or model makers.Jaw width: 75mm (3in)Clamping capacity: 55mm (2in)Throat depth: 30mm (1in)Tommy bar length: 100mm (4in)Clamp capacity: 45mmWeight: 2.93Kg (6½lbs)

The Faithfull VW150B Workbench Vice has the following specification: Jaw Width: 175mm (7in)Clamping Capacity: 185mm (7.1/4in)Throat Depth: 65mm (2.1/2in)Tommy Bar Length: 150mm (6in)Weight: 3.157Kg (7lbs)

The Faithfull VW150B Workbench Vice has the following specification: Jaw Width: 150mm (6in)Clamping Capacity: 145mm (5.3/4in)Throat Depth: 60mm (2in)Tommy Bar Length: 125mm (5in)Weight: 2.27Kg (5lbs)

The Faithfull FAIVMULTI360 is a truly versatile multi vice, which is ideal for use by both mechanics and engineers. The body and sliding jaw are constructed from fine grey cast iron and are machined to provide a smooth and reliable clamping action. The jaws, handle and main screw assembly are made from hardened steel. This strong durable vice offers many features including a four point bench mounting 360 swivel base and an ingenious rotating jaw head that allows the selection of either a standard parallel serrated jaw, or pipe jaws with an integral V-jaw assembly depending on the work in hand. The jaw head can be pivoted 180 either side of vertical and locked in position, meaning it is able to provide the perfect working angle for any application. To avoid over-loading, the vice is fitted with a fused steel main handle. Standard Jaw Capacities: Width: 140mm.Opening: 130mm.Throat depth: 75mm.Pipe clamping Jaw capacities: Jaw opening: 130mm.Maximum pipe diameter: 70mm. Tommy bar length: 230mmAnvil size: 80 x 65mm. Weight: 18kg (40lbs)Dimensions: L450 x W200 x H240mm All measurements are approximate.

This Vitrex 10 2908 Margin Trowel has a hardened and tempered steel base, ground and polished for lasting durability. The trowel has a comfortable handle with soft grip for prolonged use and a long shank with 6 rivets.It is designed for use by the professional installer and is ideal for patch jobs, and for working in difficult and awkward spaces. Specification: Blade Size: 2in.

This RST Groover trowel creates an expansion groove in concrete slabs to help control cracking. It has a double hang soft touch handle which allows weight to be distributed more evenly. Size: 150 x 75mm (6 x 3in).

The RST124BST Finishing Trowel is fitted with a banana-shaped soft touch handle for user comfort.

This trowel has a projecting groove along its base which is upturned at one end for dividing fresh concrete slabs into equal parts to control cracking.Wood handle.Double hang.Carbon steel blade.Blade Size 150 x 75mm (6 x 3 in) , with a 12mm (1/2 in) radius edge.

Blade width: 1/2in (13mm).Blade length: 6in (150mm).

Size: 130 x 50mm (5.1/2 x 2in).

The Ragni R319-4 Tiler's Trowel is fitted with a carbon steel blade that provides quality finishes and ensures trowel longevity. The U-shaped serrated edges are suitable for thin bed fixing mosaic and wall tiles up to 100mm x 100m. Its ABS plastic handle provides increased comfort for all day use. The blade-to-rivet bonding system is guaranteed for life. Comes with a 1 year guarantee. Type: Serrated Edge 4mm (U-Type)Blade Size: 280 x 120mm (11 x 4.3/4in)

This Marshalltown M180D Groover is made of stainless steel with a sturdy steel mounting, and a DuraSoft handle for added comfort.It has a, properly, shaped bit and leading edge to cut a sharp groove, and will create ½ inch wide by ½ inch deep grooves in concrete slabs to help control stress cracking. Size: 76mm x 152mm (3 x 6 in).

This Stanley FatMax Triple Pack contains the following: 1 x FatMax BladeArmor Tape has a Mylar coated steel blade and an impressive stand-out of 3.35m. The Mylar coated blade is up to 10 times more resistant to abrasion than normal lacquered blades. Its high-impact ABS plastic case has an oversized rubberised bumper, to prolong the life of the hook. With rubber overmould to deliver additional comfort and control, whilst also increasing durability and impact resistance. The 3-rivet, corrosion-resistant, Tru-zero hook allows for accurate inside and outside measurements. This particular hook also features top, bottom and side hooks for easy above, below or side measurements. The forward blade lock design makes it easier to lock and unlock the blade. Length: 5m/16ftTape Width: 32mmAccuracy: EC Class II 1 x FatMax Retractable Knife has an instant blade change mechanism. There is also a blade clamp for heavy-duty applications and a push-button blade door release for quick and easy blade change. An auto rise blade storage holder presents a single blade for changing and there is a blade wiper to remove debris from the blade. The thumb pad and ergonomic cutting angle make it comfortable to use and ideal for flooring applications. Supplied with 5 x FatMax Utility Blades. 1 x FatMax Utility Blades, Pack of 10.

The Stanley Tools FatMax Classic Tape has a Mylar coated steel blade, with both metric and imperial graduations, and an impressive stand-out of 3.35m. The Mylar coated blade is up to 10x more resistant to abrasion than normal lacquered blades. There is also BladeArmour coating on the first 50mm, this reduces the risk of breaking the blade by 95%. The 32mm wide blade makes reading the numbers easy. Its high-impact ABS plastic case is fitted with a cushion grip, providing a sturdy, slip-resistant hold. Specially designed hook grabs on the side, bottom or top for added versatility. Blade Length: 8m/26ftBlade Width: 32mmAccuracy: EC Class II

The Stanley Key Ring Tape has a Mylar coated steel blade with metric graduations and an impressive stand out of 90cm. It has a high-impact ABS plastic case with a soft-grip, rubberised outer casing to help it withstand the usual knocks and bumps. The 2-rivet, corrosion resistant, tru-zero hook allows for accurate inside and outside measurements. The blade is kept firmly in place via a strong, smooth action locking mechanism.

The Stanley Closed Case Steel Long Tape has a 10mm wide yellow steel blade with polymer coating for durability and easy to read markings in both metric and imperial graduations. The closed high visibility yellow ABS case protects the blade and internal workings due to its hard-wearing, high impact properties. Other features include a folding crank, easy wind drum and a hook with spurs for ease of use. Blade Length: 30m/100ftBlade Width: 10mmAccuracy: EC Class II

The Stanley PowerLock Top Reader Tape has a clear viewing window on the top of the case. Ideal for those taking internal measurements on a regular basis as the length of the case is taken into account by the measurement you see within the viewing window. Its Mylar coated steel blade with metric graduations. That is up to 10 times more resistant to abrasion than normal lacquered blades. Tipped by a super-strong 3 rivet, automatically adjustable tru-zero end hook. Supplied in a high-impact, chrome plated ABS plastic case with a smooth, quick-grab auto-locking mechanism and a conventional steel belt clip.

The Komelon PowerBlade™ II Pocket Key Ring Tape is small enough to fit in your pocket or purse, but big enough to handle your measuring needs. It has a durable ABS plastic case, a sturdy nylon coated steel blade with metric graduations and secure slide lock. Fitted with a quick-release clasp, for attaching to your keys or belt loop. Specification: Blade Length: 2mBlade Width: 13mmAccuracy: Class II

The Hultafors ST30/15 Satellite Tape has a 10mm Matt Coat polyester coated steel blade that has graduations in both metric and imperial. Fitted with a unique triple action end-loop and fold-in claw that enables the tape to be anchored into or over a wide variety of objects and surfaces. With a closed case design that protects the blade and internal workings with a hard-wearing, high-impact ABS case, ultrasonically welded for added strength, that fits comfortably into the palm of your hand. Rewinding is made easy and comfortable with the sturdy winding handle and rotating winding knob, which can then be stored neatly back into the centre of the tape. There is also an ABS belt clip moulded on to the rear of the case. Made in Britain. Specification: Length: 30m/100ftBlade Width: 10mmAccuracy: EC Class II

The Hultafors Brick-Mate Tape provides an innovative way to set out dry bonds and accurately calculate brick and breeze block quantities. The blade is marked with 4 scales: 1 Bricks, 2 Blocks, 3 Courses and 4 Conventional metric. The bright, ergonomic ABS case has a non-slip rubber grip pad and easy-to-operate positive action lock, minimising blade slip. With a bump stop for added blade and end-hook protection, and a unique snap-in quick-release belt clip holster. Made in Britain. Accuracy: EC Class IThis Hultafors BM8M Brick-Mate Pocket Tape has metric measurements only.SpecifiationBlade Length: 8mBlade Width: 25mm

This Fisco XFY Yellow ABS Nylon Rule is a general purpose four-fold rule for home, workshop, and trade use, it is made from hard-wearing ABS plastic.The brass hinged pins and end pieces extend the square's life and it has precisely inscribed and permanent graduations.Specifications: Length: 1m (3ft).Width: 32mm.

The Faithfull Fully Enclosed Fibreglass 30m / 100ft Long Tape features a 15mm wide blade clearly marked in both metric and imperial measurements. The fibreglass blade is resistant to stretching, impervious to moisture and resistant to scuffs and fitted with an ABS end loop. The large clear measurement increments are easy to read in most conditions and the tape is also easy to wipe clean after use. The tape is stored in a tough closed ABS, soft grip case, with a fold flat rewind handle and rotating winding knob with 3:1 gearing that allows the tape to be quickly rewound after use. Accuracy: EC Class III.

Colour: White

Colour: Yellow

The Advent 2-In-1 Gap Tape is a unique product for normal and internal measurements. It has a double sided, non reflective steel blade with metric and imperial graduations. Contained with an ergonomically designed ABS case with a moulded rubber grip for increased comfort. With normal measurements on the top of the blade, the reserve blade markings take into account the tape case dimensions, so when you measure internal spaces you simply butt the case up to the end and read the measurement.

The Faithfull Diamond Whetstone Kit contains 3 stones for quick, easy and effortless sharpening of any blade. The 70 x 200mm metal stones are electroplated with monocrystalline diamond in three grits, 400G Coarse, 600G Medium and 1000G Fine. The ABS plastic base has non-slip pads for use on most surfaces, and each stone can be removed to be used separately. The benefit of these stones over a traditional abrasive sharpening stone is that the sharpening surface remains absolutely flat and will not groove over time. This is essential in order to provide consistent straight edges on precision cutting tools such as wood chisels and plane irons. Diamond stones will sharpen carbon steel, HSS and tungsten carbide tools and may also be used to abrade glass, ceramic tiles and porcelain. Ideal for general purpose sharpening of knives, scissors, chisels, plane blades, cutting blades, TCT router bits and any tool that requires a sharp edge. Can be used dry or with water as a lubricant, no oils are necessary. Blade Size: 70 x 200mmOverall Size: 232 x 225 x 40mm

The Faithfull Diamond Sharpening Stone Kit is ideal for quick, easy and effortless sharpening of any blade and many other tools. The double sided 8mm thick metal stone is electroplated with monocrystalline diamond in two grits, 400G Coarse 1000G Fine, each can be easily accessed by simply releasing the stone from the docking station and turning it over.The benefit of this stone over a traditional abrasive sharpening stone is that the sharpening surface remains absolutely flat and will not groove over time. This is essential in order to provide consistent straight edged on precision cutting tools such as wood chisels and plane irons.Diamond stones will sharpen carbon steel, HSS and tungsten carbide tools and may also be used to abrade glass, ceramic tiles and porcelain and may be used dry or with water as a lubricant. Used for general purpose sharpening of knives, scissors, chisels, plane blades, cutting blades, TCT router bits and any tool that requires a sharp edge.The docking station is constructed using three solid, non-slip rubber pads and robust steel rods that are fitted with easy grip screw nuts for precise and firm fixing of the stone. The docking station is adjustable to accept stones from 135 to 216mm in length and has a 6mm deep recess to provide a secure and firm base for all sharpening operations.Supplied with a handy storage wallet.

The Stanley 0-54-925 Ratchet Screwdriver Set is ideal for all trades or DIY job applications, as it is well equipped with all the most common sockets and screwdriver bits for small jobs. Ideal for mechanics, model making, general garden/appliance repairs and lots lots more. Contents: 1 x Stanley Ratchet Screwdriver. 6 x Metric 1/4in Drive 6 Point Socket: 5mm, 6mm, 7mm, 8mm, 9mm, 10mm. 6 x Imperial 1/4in Drive 6 Point Socket: 1/4in, 5/16in, 11/32in, 3/8in, 7/16in, 1/2in. 5 x 25mm Phillips Bits: PH1(2), PH2(2), PH3. 3 x 25mm Parellel Bits: 6mm(2), 7mm. 5 x 25mm Torx Bits: TX10, TX15, TX20, TX25, TX27. 2 x 25mm Hex Bits: 3mm, 4mm. 1 x 1/4in Adaptor.

The Faithfull Interchangeable VDE Screwdriver Set offers a neat solution to the problem of both limited space and portability. Many electricians and service engineers are reluctant to take bulky toolboxes around with them as they are often working in restricted areas or are up and down ladders and need their tools readily to hand. The soft grip handle features an automatic locking system; a twist to release function allows the blades to be changed quickly with the minimum of fuss. Faithfull VDE screwdrivers are manufactured to BS EN 60900:2012 and are individually tested at 10,000V in a water bath before leaving the factory. This guarantees a safe working limit of up to 1,000V providing the maximum level of safety. Supplied in a compact storage case with the following: 1 x Auto-Locking, Quick Release Soft Grip Handle.4 x Slotted Blades: 0.5 x 3 x 100mm, 0.8 x 4 x 100mm, 1 x 5.5 x 100mm and 1.2 x 6.5 x 100mm.2 x Phillips Blades: PH1 x 80mm and PH2 x 100mm.2 x Pozidriv Blades: PZ1 x 80mm and PZ2 x 100mm.3 x Star Blades: TX10 x 100mm, TX15 x 100mm and TX20 x 100mm.1 x Single-Pole Voltage/Mains Tester: 3 x 140mm 100-250V (not VDE certified). Specification: Screwdriver Length (inc. handle): 190/210mmStorage Case Dimensions: 210 x 130 x 44mm

The Faithfull Multi-Tester is more than just a conventional voltage tester. The built-in battery powered sensor allows the multi-tester to perform a number of different functions without the need to dismantle a suspected faulty item or have any contact with live parts. The multi-tester is fully insulated and is supplied complete with full operating instructions and will perform the following tests: continuity, bulbs, fuses, short circuits, cable tracking, mains sockets and microwave oven leakage. SAFETY NOTEAlways read and the instruction supplied with the multi-tester.Never use a multi-tester until you are fully conversant with its use and applications. Never work on live equipment, and if in any doubt, always contact a qualified electrician.

Bahco ERGO™ Through Blade Screwdrivers have been developed according to the scientific ERGO™ process. The high-performance alloy steel blade has been chrome plated and entirely hardened for high protection against corrosion, long life tool. A black oxide tip provides higher accuracy. The blade continues through the handle with no loss of hammer blow energy. A metallic cap provides protection during jobs requiring high impact. The three-component handle provides maximum user comfort. Its soft material with ridged surface provides superior grip and greater force transmission. A flat face prevents the screwdriver from rolling away. Its easy to choose the right tip, thanks to the colour-coded handle and permanent symbol on the domed end. Contains: 4 x Slotted: 3.5 x 0.6 x 75mm, 4.5 x 0.8 x 100mm, 5.5 x 1.0 x 100mm and 6.5 x 1.2 x 125mm 2 x Pozidriv: PZ1 x 100mm and PZ2 x 125mm

Bahco Series 039 Through shank Phillips screwdriver colour coded (Red for Phillips) for quick identification of tip type. The striking metal cap at the top of the handle gives ultimate protection during jobs requiring high impact and added force. The shank continues through the handle before contacting to a striking metal cap for ultimate strength. The hole in the handle allows the insertion of a T bar for added force transmission. Bahco Tekno Through Shank Screwdriver. Phillips Tip PH2 x 125mm.

The Vaughan Coarse/Medium Japanese-Style 'Bear' Pull Saw that cuts on the pull stroke. Made from spring steel that is plated for rust resistance. It is interchangeable with other 'Bear' Saw blades and locks securely, yet can be disassembled for convenient storage. The specially ground, triple edged teeth are impulse hardened to retain sharpness. Blade Length: 333mm (13in). Made in Japan.

The Vaughan BS265M Medium / fine Japanese-style 'Bear' Pull Saw that cuts on the pull stroke. Made from spring steel that is plated for rust resistance. It is interchangeable with other 'Bear' Saw blades and locks securely, yet can be disassembled for convenient storage. The specially ground, triple edged teeth are impulse hardened to retain sharpness. Blade length: 265mm (10.1/2in). Made in Japan.

The Vaughan BS250D Bear Saw has the following specifications: Blade Length: 250mm (10in).Total Length: 585mm (23in).

The Vaughan BS240P Extra Fine Japanese-style 'Bear' Pull Saw that cuts on the pull stroke. Made from spring steel that is plated for rust resistance. It is interchangeable with other 'Bear' Saw blades and locks securely, yet can be easily disassembled for convenient storage. The specially ground, triple edged teeth are impulse hardened to retain sharpness. Blade Length: 240mm (8.3/8in). Made in Japan.

The Vaughan BS150D Bear Saw has the following specifications: Blade Length: 150mm (5.1/2in).Total Length: 300mm (12in).

Replacement blade for the Vaughan BS333C Bear Saw.Made from spring steel and plated for rust resistance. With specially ground triple edged teeth, which are impulse hardened.Blade length: 333mm (13 inch).Blade toothing: Coarse/ Medium.

Replacement blade for the Vaughan BS265M Bear Saw.Made from spring steel and plated for rust resistance. With specially ground triple edged teeth, which are impulse hardened.Blade length: 265mm (10.1/2 inch).Blade toothing: Medium / Fine.

Replacement blade for the Vaughan BS250D Bear Saw.Made from spring steel and plated for rust resistance. With specially ground triple edged teeth, which are impulse hardened.Blade length: 250mm (10 inch).

Replacement blade for the Vaughan BS240P Bear Saw.Made from spring steel and plated for rust resistance. With specially ground triple edged teeth, which are impulse hardened.Blade length: 240mm (8.3/8 inch).Blade toothing: Extra fine.

Replacement double edged blade for the Vaughan BS150D Bear Saw.Made from spring steel and plated for rust resistance. With specially ground triple edged teeth, which are impulse hardened.Blade length: 150mm (5.1/2 inch).

100 x Starrett Bi-Metal Unique Safe-Flex Hacksaw Blades 300mm (12in) x 32tpi