The Stanley FatMax 30 metre Chalk Line is enclosed in a durable die-cast aluminium housing with a patented chalk view window to see exactly how much chalk is left. It contains 100ft of 50lb polyester/nylon string and will hold over 1.5oz of chalk.A release button allows a line extension without handle rotation, the line can be quickly rewound due to the 5:1 gear ratio. The specially designed hook grabs on side, top or bottom for versatility. Specifications: Length: 30m (100 ft).

Stanley Power Winder Chalk Line with a stainless steel hook for added durability and rust prevention. It has an ergonomic design, holds 30m of string and has a 45g chalk capacity. The weight and style combination provides an excellent plumb bob facility. With a high impact ABS case for durability, a 3.5:1 gear ratio which rewinds faster and a metal crank which folds into the case for storage.

This Stanley Chalk Line has an ergonomic design, with a high impact ABS case for durability. It has an on-board hook storage, a crank which folds into a case for storage and a sliding door which allows for quick and easy refill (30g. Chalk Capacity). It has a stainless steel end hook for added durability and rust prevention, and can hold 30m of string.Supplied with 113g blue chalk and line level.

This Stanley 047440 Chalk Line has a 30g/1oz chalk capacity and holds 100ft of string. It can be used vertically as a plumb bob with the crank folding into the case for storage. It has an ergonomic design and high impact ABS case for durability. There is a sliding door for quick, easy refill and a stainless-steel end hook which does not rust.Specification: Cord Length: 30m.

The Stanley Compact Chalk Line is less than half the size, by volume, of standard chalk reels. It has a 9m precision line that snaps clean with accurate lines and a high impact ABS housing that is durable and light. It also has soft grip over-moulding that provides more user comfort and a secure grip. The 3:1 rewind gear ratio retracts the line 3x faster than a standard 1:1 reel. The chalk lines slide-open door allows for quick chalk refills and has a compact reel chalk capacity that gives up to 50 lines per refill. Also features a belt clip for easy transport and storage.

The Sharpie Twin Tip Permanent Marker can be used on most surfaces. With a 1mm fine tip at one end and a 0.5mm fine nib at the other. Ideal for everyday use; at home, on the jobsite etc. The high-quality ink dries quickly and resists both fading and water. The cap quickly identifies the colour inside, there is also a handy clip that allows the marker to be attached to a pocket or folder.

The Sharpie Retractable Fine Permanent Marker has a 1mm tip and no cap to remove or lose, this enables easy one-handed operation. A unique safety seal valve prevents drying out. It can be used on most surfaces. Ideal for everyday use; at home, on the jobsite etc. The high-quality ink dries quickly and resists both fading and water.

CDU of 30 MarXman Standard Professional Marking Tools. The MarXman Standard Professional Marking Tool has a unique design. With one push, it quickly, easily and clearly marks almost any surface. For jobs with fixing holes up to depths of 45mm. Each pen contains 250 bursts of removable, fluorescent green pigment and is capable of marking all surfaces including brick, metal, wood, pebbledash, porcelain and ceramic. The perfect drilling companion for electrical, plumbing, building jobs and much more.

The MarXman Standard Professional Marking Tool has a unique design. With one push, it quickly, easily and clearly marks almost any surface. For jobs with fixing holes up to depths of 45mm. Each pen contains 250 bursts of removable, fluorescent green pigment and is capable of marking all surfaces including brick, metal, wood, pebbledash, porcelain and ceramic. The perfect drilling companion for electrical, plumbing, building jobs and much more.1 x MarXman Standard Professional Marking Tool

CDU of 30 MarXman Standard Deep Hole Professional Marking Tools. The MarXman Professional Marking Tool has a unique design. With one push, it quickly, easily and clearly marks almost any surface. Each pen contains 250 bursts of removable, fluorescent green pigment and is capable of marking all surfaces including brick, metal, wood, pebbledash, porcelain and ceramic. The perfect drilling companion for electrical, plumbing, building jobs and much more. This CDU contains the following mix: 20 x MarXman Standard Professional Marking Tools. For jobs with fixing holes up to depths of 45mm. 10 x MarXman Deep Hole Professional Marking Tools. Recommended for jobs with fixing holes exceeding depths of 45mm, e.g. fence posts. Its special nozzle is designed to shoot the green pigment further and more accurately. Not advised for marking distances under 45mm.

CDU of 30 MarXman Deep Hole Professional Marking Tools. The MarXman Deep Hole Professional Marking Tool has a unique design. With one push, it quickly, easily and clearly marks almost any surface. Each pen contains 250 bursts of removable, fluorescent green pigment and is capable of marking all surfaces including brick, metal, wood, pebbledash, porcelain and ceramic. Recommended for jobs with fixing holes exceeding depths of 45mm, e.g. fence posts. Its special nozzle is designed to shoot the green pigment further and more accurately. Not advised for marking distances under 45mm. The perfect drilling companion for electrical, plumbing, building jobs and much more.

This Hultafors square is semi-professional with fibreglass-reinforced ABS plastic stock and millimetre graduations on the upper and lower edges of the blade. The blade is made from stainless steel, measuring 1.0 x 45 mm, and has a fibreglass-framed ABS plastic stock, with an 18 mm wide working surface.The graduations are deep etched, and highly resistant to wear. Size: 200mm.

The Hultafors CLP30 Chalk Line has a 30m line, metal crank and quick gear function 3:1. The housing is made from ABS plastic, has a big opening for refilling and a cap with bayonet joint and contains up to 100g of chalk. The line is braided cotton/polyester with high absorbing chalk capacity and considerable increased numbers of distinct lines - up to 10 lines. The crank is fitted with an ergonomic release button and knob. It can be locked in the open and closed position. The cap is secured by the hook, no line is left hanging loose. There is also a secure strap function.

The Hultafors Chalk Line comes with a cast powder-coated aluminium body with a sliding filler cover. The cord is braided cotton/polyester, the cotton absorbs the chalk while the polyester provides the strength, and the braid ensures the cord never tangles. The cord is 1 mm in diameter, and has a rupture limit of 16 Kg. 30m / 100ft.Capacity: 80g of chalk.

This Faithfull Mortice Gauge is made from the finest hardwood, and enhanced with brass facing plates and fittings. A nylon friction pad is fitted under the knurled brass thumbscrew to reduce wear to the stem and to ensure secure, smooth and accurate setting of the gauge. Used for laying out mortices and for marking out with the grain. The second pin is used for mortice work can be accurately set by means of the pullslide.

This Faithfull Marking Gauge is made from the finest hardwood, and enhanced with brass facing plates and fittings. A nylon friction pad is fitted under the knurled brass thumbscrew to reduce wear to the stem and to ensure secure, smooth and accurate setting of the gauge. Used to mark parallel lines either with or across the grain.

This Faithfull Cutting Gauge is made from the finest hardwood, and enhanced with brass facing plates and fittings. A nylon friction pad is fitted under the knurled brass thumbscrew to reduce wear to the stem and to ensure secure, smooth and accurate setting of the gauge. Primarily used for scoring across the grain but can be used for cutting small strips of veneer. The re-sharpenable cutter is held securely in place by a solid brass wedge.

This Faithfull Combination Gauge is made from the finest hardwood, and enhanced with brass facing plates and fittings. A nylon friction pad is fitted under the knurled brass thumbscrew to reduce wear to the stem and to ensure secure, smooth and accurate setting of the gauge. Used for laying out mortices and for marking out with the grain. The second pin is used for mortice work can be accurately set by means of the screwslide.

The Bahco Mechanical Carpenter's HB Pencil requires no sharpening. It has a wide, strong lead that holds perfectly against rough materials. The angled shaped tip is ideal for precision marking when using a square. All contained within a high-impact ABS body that is rectangular shaped to avoid rolling. Replaceable lead that lasts up to 3x longer than standard pencils. Supplied with 3 leads.

Stabila 96-2-K 3 Vial Double Vertical Plumb Masons Level. Superior quality masons level with plastic shield to protect the level against hits with a trowel. The second vertical vial is positioned closer to the centre of the level for better readability in lower positions. Easy-to-clean due to chamfered edges and new vial plastic parts. Extra-strong profile with ribs and reinforced upper and lower side for daily use on the construction site. High-precision vials are firmly moulded in place to ensure complete accuracy. Other features include: Removable end caps for difficult-to-reach corners and anti-slip stoppers for convenient marking of walls. Length: 800mm (32 in).

Stabila superior quality masons level with plastic shield to protect the level against hits with a trowel. The second vertical vial is positioned closer to the centre of the level for better readability in lower positions. Easy-to-clean due to chamfered edges and new vial plastic parts. Extra-strong profile with ribs and reinforced upper and lower side for daily use on the construction site. High-precision vials are firmly moulded in place to ensure complete accuracy. Other features include: removable end caps for difficult-to-reach corners, anti-slip stoppers for convenient marking of walls and rubberised grips for better handling. Has 3 vials. Length: 1220mm (48in)

The Stanley 0-42-294 Torpedo Level has a plastic ABS body and 3 fixed vials: 1 vertical, 1 horizontal and 1 for setting 45 angles. Its top and bottom edges are parallel and grooved.; Overall Length: 200mm (8in).

Small, neat line level made of impact-resistant plastic with a vial and hooks at both ends. Hang the level on a tensioned string so that you can check the incline between 2 points. Made from ABS plastic which makes the level both light and durable. The tube vial is made of Plexiglas while the vial fluid is a low viscosity, oil mixture that gives the bubble the best possible conditions for movement.

An impact-resistant ABS plastic level that will withstand temperatures between -15C and60C. It has impact-resistant tubular vials with extremely high transparency and durability. Sensitivity of 13 mm/m and a tolerance in normal position of 1.5 mm/m. The vial fluid is a low viscosity, coloured oil mixture that gives the bubble the best possible conditions for movement and is resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.

An extra robust aluminium level with highly transparent and durable unbreakable block vials. The horizontal luminous vial magnifies at30%. Impact absorbing secure end guards. Sensitivity of 10mm/m and a tolerance in normal position of 0.5 mm/m (inverted 0.5 mm/m). The vial fluid is a low viscosity, coloured oil mixture that gives the bubble the best possible conditions for movement and is resistant to UV light and temperature fluctuations. The bubble is also not affected by static electricity as the fluid is anti-static.1 x Hultafors PV 120 Professional Spirit Level 3 Vial 120cm

Red, impact-resistant plastic level with 2 right-angled vials. Ideal for checking the incline of 2 horizontal surfaces simultaneously. Made from ABS plastic which makes the level both light and durable. The tube vials are made of Plexiglas.

Stabila OLS 26 Optical level with a 26-fold magnification in optical system. No batteries required to use with the focusing and easily accessible adjusting screw. It has a robust IP54 protection rated casing with easy-grip, shock-absorbing soft shell and solid protection of optical unit. Supplied with: 1 x Geo-folding Rule 2m, 1 x Plumb Line, Rain Protection, Adjusting Tools and 1 x Robust Carry Case. Specification: Accuracy of Height (Single Measurement): 1mm/10mMin. Focussing Distance: approx. 1mObjective Lens Aperture: 38mmStandard Deviation: < 2mm/kmMagnification: 26-foldProtection Class: IP 54

The Stabila LD 520 Laser Distancer is a compact measuring device with easy to operate measuring functions. Including: length, area, volume, timer, calculator, indirect distance, inclination, triangular area measurement, continuous measurement, indirect height measurement, inclined objects, trapezoidal measurement, elevation profile measurement and stake-out function. It also has a memory function that stores and recalls the previous 30 measurements. Has a digital target locator's using a built-in camera with crosshairs and allows distances of up to 200m to be measured. The 360 inclination sensor provides flexible measurement from any position (displays 180). Allows absolute horizontal measurements to be made and is also the basis for several new functions. It has a 61mm colour display with a 4x zoom and high resolution for pin-sharp images even in strong light. A built-in calculator that enables measurements to be multiplied or divided by fixed values (e.g. hourly rates or material costs). This provides usable calculated figures, to make meaningful quotations on site. With a robust, impact-resistant housing and a shock-absorbing soft-grip cover. In addition, it has IP54 class protection against rain and dust. Integrated Bluetooth Smart technology enables measurement data to be wirelessly transferred from the laser to a smartphone or tablet. The free 'Stabila Measures' App allows measurements to be transferred directly to photos of the building site or drawings. Specification: Accuracy:1.0mm.Operating Range: 0.05-200m.Power: 2 x AAA batteries (supplied).Protection Class: IP54 (dust rain).Laser Class: 2.Laser Wavelength: 635nm.

The Stabila LD 320 Laser Distancer is a compact measuring device with easy to operate measuring function. Including: length, area, volume, tracking (continuous measurement), Pythagoras with 2 or 3 measuring points and min/max tracking. With a large, backlit screen and large readout making it easy to read in any environment. Its impact-resistant housing with shock absorbing soft grip casing provide excellent durability for the worksite. Provides all the measuring technology that most craftsmen need on the building site. Fulfils the international standard ISO 16331-1 certification for repeatable accuracy. Specification: Accuracy:1.5mmOperating Range: 0.05-60mPower: 2 x AAA batteries (supplied)Laser Class: 2Laser Wavelength: 635nm

The Stabila LD 220 Laser Distancer is a compact, easy-to-use laser with 4 basic measuring functions: length, area, volume and continuous measurement. It has a large, back lit screen with large readout making it easy to read in any environment. With an impact-resistant, IP54 rated housing with shock-absorbent soft-grip casing. The laser delivers quick measurement results and assists in daily work, e.g. calculating how much material is needed. Specification: Accuracy:3.0mm.Operating Range: 0.2-30m.Power: 2 x AAA batteries (supplied).Protection Class: IP54 (dust water splash).Laser Class: 2.Laser wavelength: 635nm.

The Stabila LAX 400 Multi-Line Laser rotates horizontally through 360 for line marking and levelling around an entire room. It has a manual alignment function, where two lines form a 90 angle. With fine adjustment, the laser lines can be pivoted to a target position without losing the position of the plumb-line dot. The laser has a vertical beam which is directed downwards and is clearly visible through the adjustable feet. Above, the two vertical lines intersect precisely over the plumb line dot. The LAX400 is ideal for transferring a layout from floor to the ceiling and for quick and accurate plumb bobbing. It has a shock-absorbent soft-grip case. Specification Level Accuracy:± 0.3 mm/m.Self-Levelling Range:± 4.0.Working Range: 20m.Power: 4 x AA batteries (supplied).Average Battery Life: 10 Hours. Tripod Thread: 1/4in.Laser Class: 2.Line Straightness:± 0.2mm/m, 90 Angle Precision:±0.3mm/m.Protection Class: IP54 rated, against splash dust damage.

The Stabila LAX 300 G Cross Line Laser Level is the ideal partner for interior construction professionals who need accurate laser lines with optimum visibility. The innovative STABILA GREENBEAM technology provides razor-sharp, extremely bright laser lines. You can perform plumb-line and levelling work on the floor, wall and ceiling, all at the same time. The laser produces 1 horizontal line, 1 vertical line and plumb-line dots, upwards and downwards. The vertical line almost covers the entire room. It has a quick self-levelling function and pendulum technology that has been designed specifically for the construction site. With easy to change functions, via the single-button operation. Fitted with energy-saving laser diodes that provide an operating time of up to 15 hours. Can be used directly on the floor, attached to a tripod (1/4in thread) or fastened to metallic objects/wall bracket by its rare earth magnet. The compact housing features an extendable foot for height adjustment and working directly on U-profiles. With shock absorbent STABILA soft grip casing that is IP54 rated, against splash and dust damage. The laser can be pivoted 360 inside the housing. Supplied with: 1 x Target Plate, 1 x Wall Bracket, 1 x Belt Pouch 3 x AA 1.5V Batteries Specification: Level Accuracy: 0.3mm/m.Self-Levelling Range: 4.5.Working Range: 30m.Power: 3 x AA batteries (supplied).Average Battery Life: 15 Hours.Tripod Thread: 1/4in.Laser Class: 2.Line Straightness:± 0.2mm/m.Protection Class: IP54 rated, against splash dust damage.

The Stabila LAX 300 Cross Line Laser Level is ideal for marking out floors, walls and ceilings. It has 3 functions and a visible line range of 20m with a red laser diode. Has 3 lines: one horizontal line, one upwards vertical line, and one downwards plumb-line make the laser well suited for the transfer of the layout from floor to roof. The laser also allows quick and precise plumbing. A very bright, narrow and clear laser line is visible up to 20m. The laser can be rotated through 360 in its housing and can be used directly on the floor, attached to a tripod (1/4in thread), fastened to metallic objects by its rare earth magnet and V-groove or secured by the metal lugs using a strap. The laser level has a shock-absorbent STABILA soft-grip casing, providing high protection (class IP 54). There is optimal protection of the optical equipment against dust and scratches by rotation inside the U-shaped housing. Thanks to the pulsed laser lines, the LAX 300 can be used both inside and out. Specification Level Accuracy:± 0.3 mm/m.Self-Levelling Range:±4.5.Working Range: 20m.Power: 3 x AA batteries (supplied).Average Battery Life: 20 Hours. Tripod Thread: 1/4in.Laser Class: 2.Line Straightness:± 0.2mm/m.Protection Class: IP54 rated, against splash dust damage.

The Stabila LAR 350 Rotation Laser is a fully automatic motor-driven rotation laser for horizontal and vertical applications, as well as manual inclination in 2 axes. With innovative motion control for quick, reliable and convenient laser operation via the supplied remote control. It has several useful functions, including: Dual slope inclination function, which allows for controlled inclination setting of up to 5 on 2 axes; Section mode enables you to set up a working area, meaning that the laser beam is only emitted in a defined area; Manual alignment function provides a pivoting axis in vertical operation; The integrated LED assist system allows for easy operation and safety in the workplace. It alerts the user at various points, for example, which axis is currently tilted or is being tilted. The body of the laser is IP65 rated, dust and waterproof. It also incorporates the patented STABILA PROTECTOR system, which offers maximum protection, even when the laser is dropped from a tripod at a height of up to 1.80m. Supplied with the Stabila REC300 Receiver which has 2 displays: one each on the front and back with digital display of the reference deviation in mm, inches in (fractions) and ft. Allowing you to read the deviation from the reference height directly. Acoustic guidance with selectable volume and a series of symbols will indicate your distance from the reference height and whether you are too high or low. Its loud signal can be heard even with loud background noise. Also supplied with: 1 x RC-LAR 350 Remote Control, 1 x BST-S Construction Tripod, 1 x NL Levelling Rod, 1 x 90 Angle Rail, 1 x Laser Goggles, 1 x Target Plate, 1 x Carrying Case, 2 x D 1.5V Batteries and 4 x AA 1.5V Batteries. Specification: Levelling Accuracy:0.10mm/mRange: 800mSelf-Levelling Range:5Laser Class: 2Operating Life: 80 hoursPower: 2 x 1.5V D Cell batteries (supplied)Protection Class: IP65Tripod Connection: 5/8in

The Stabila LAR 160 Rotation Laser has a high levelling accuracy of 0.1mm/m, fast self-levelling within 20 seconds. Fully automatic with four laser functions: horizontal and vertical rotation, plumb line function and right angle (90) in vertical operation. Easy to use, via three control buttons: on/off, tilt mode and manual mode. Covered with a shock-absorbent soft grip casing that provides protection against impacts whilst the stable housing cover protects the laser optics. Dustproof and waterproof to IP65. With two integrated 5/8in threads in the housing, for horizontal and vertical tripod use. Supplied with: 1 x BST-S Construction Tripod, 1 x NL Levelling Rod, 1 x REC 160 RG Receiver, 1 x Laser Goggles, 1 x Target Plate, 2 x D 1.5V Batteries, 2 x AA 1.5V Batteries and 1 x Carrying Case. Specification: Laser Type: RedAccuracy: 0.1mm/mDiameter of Working Area with Set Receiver: 600mLaser Class: 2Laser Wave Length: 635nmIP Rating: IP65

The Stabila LAR 160 Rotation Laser has a high levelling accuracy of 0.1mm/m, fast self-levelling within 20 seconds. Fully automatic with four laser functions: horizontal and vertical rotation, plumb line function and right angle (90) in vertical operation. Easy to use, via three control buttons: on/off, tilt mode and manual mode. Covered with a shock-absorbent soft grip casing that provides protection against impacts whilst the stable housing cover protects the laser optics. Dustproof and waterproof to IP65. With two integrated 5/8in threads in the housing, for horizontal and vertical tripod use. Supplied with: 1 x REC 160 RG Receiver, 1 x Laser Goggles, 1 x Target Plate, 2 x D 1.5V Batteries, 2 x AA 1.5V Batteries and 1 x Carrying Case. Specification: Laser Type: RedAccuracy: 0.1mm/mDiameter of Working Area with Set Receiver: 600mLaser Class: 2Laser Wave Length: 635nmIP Rating: IP65

The Stabila LAR 160 G Rotation Laser has a high levelling accuracy of 0.1mm/m, fast self-levelling within 20 seconds. Fully automatic with four laser functions: horizontal and vertical rotation, plumb line function and right angle (90) in vertical operation. Easy to use, via three control buttons: on/off, tilt mode and manual mode. Covered with a shock-absorbent soft grip casing that provides protection against impacts whilst the stable housing cover protects the laser optics. Dustproof and waterproof to IP65. With two integrated 5/8in threads in the housing, for horizontal and vertical tripod use. Utilises Stabila Greenbeam technology for improved visibility of the rotating laser beam. Green laser beams are 4x more visible to the human eye than red beams. Supplied with: 1 x REC 160 RG Receiver, 1 x Target Plate, 2 x D 1.5V Batteries, 2 x AA 1.5V Batteries and 1 x Carrying Case. Specification: Laser Type: GreenAccuracy: 0.1mm/mDiameter of Working Area with Set Receiver: 600mLaser Class: 2Laser Wave Length: 510-530nmIP Rating: IP65

The Stabila BST-S 5/8in Thread Construction Tripod extends between 100-160cm in height. The aluminium construction is lightweight and durable and its spiked feet are stable on any terrain. The adjustable legs feature a rapid locking function and spread stopper. Also comes with a carrying strap for easy transportation. It accepts the Stabila laser level base plate.

The Stabila BST-K-M Mini Column Construction Tripod extends between 69 - 170cm in height. It has a compact design, that makes it easy to store and also enables working at lower heights than when working with traditional tripods.

The Stabila BST-K-L Column Construction Tripod extends between 98-220cm in height.

The Stanley Intelli Tools 360 Cross Green Line Laser Level projects a 360 horizontal line and 100 vertical line. Ideal for use in a wide variety of jobs, including woodworking, drywall installation, framing and roofing. The body is fitted with overmould housing for protection against knocks. Easy-to-use, fitted with a touch pad control panel and a 3-position lock switch with manual mode. It is IP50 rated, making it ideal for indoor DIY and residential construction jobs. Supplied with: 4 x AA alkaline batteries, 1 x QuickLink™ Bracket and 1 x Storage Pouch. Specification: Level Accuracy:0.4mm/mWorking Range: 25mPower: 4 x AA batteries (supplied)Thread: 1/4in

The Stanley Intelli Tools Cross90™ Green Beam Laser is self-levelling and projects a 100 vertical beam, horizontal beam and an additional 90 vertical beam. The 90 beam is ideal for tile or flooring installation or to lay out partition walls with ease. The green beams allow for enhanced visibility while working. The body is fitted with overmould housing and rubber bumpers on all corners for protection against knocks. Easy-to-use, fitted with a touch pad control panel and a 3-position lock switch with manual mode. It is IP50 rated, making it ideal for indoor DIY and residential construction jobs. Supplied with: 2 x AA alkaline batteries, 1 x QuickLink™ Bracket and 1 x Storage Pouch. Specification: Level Accuracy:0.5mm/mWorking Range: 16mPower: 2 x AA batteries (supplied)Thread: 1/4inWeight: 0.6kg

The Stanley Intelli Tools 360 Cross Red Line Laser Level projects a 360 horizontal line and 100 vertical line. Ideal for use in a wide variety of jobs, including woodworking, drywall installation, framing and roofing. The body is fitted with overmould housing for protection against knocks. Easy-to-use, fitted with a touch pad control panel and a 3-position lock switch with manual mode. It is IP50 rated, making it ideal for indoor DIY and residential construction jobs. Supplied with: 4 x AA alkaline batteries, 1 x QuickLink™ Bracket and 1 x Storage Pouch. Specification: Level Accuracy:0.4mm/mWorking Range: 20mPower: 4 x AA batteries (supplied)Thread: 1/4in

The Stanley Intelli Tools Cross90™ Red Beam Laser is self-levelling and projects a 100 vertical beam, horizontal beam and an additional 90 vertical beam. The 90 beam is ideal for tile or flooring installation or to lay out partition walls with ease. The body is fitted with overmould housing and rubber bumpers on all corners for protection against knocks. Easy-to-use, fitted with a touch pad control panel and a 3-position lock switch with manual mode. It is IP50 rated, making it ideal for indoor DIY and residential construction jobs. Supplied with: 2 x AA alkaline batteries, 1 x QuickLink™ Bracket and 1 x Storage Pouch. Specification: Level Accuracy:0.5mm/mWorking Range: 12mPower: 2 x AA batteries (supplied)Thread: 1/4inWeight: 0.6kg

The Stanley Intelli Tools Cubix™ Cross Line Laser Level is ideal for indoor use, DIY and light residential construction jobs, including levelling chair rails and hanging cabinets. By projecting bright green vertical and horizontal lines onto flat surfaces, users can easily level what they are installing. The Cubix™ is protected by a durable, overmoulded housing. It projects a green vertical line and horizontal line. Fitted with a touch pad control panel, locking pendulum and a 3 position lock switch with manual mode. Supplied with: 1 x Protective Pouch1 x Removable QuickLink™ Bracket2 x AA batteries1 x Quick Start Guide Specification: Level Accuracy:0.6mm/mWorking Range: 16mPower: 2 x AA batteries (supplied)Thread: 1/4in

The Stanley Intelli Tools Cubix™ Cross Line Laser Level is ideal for indoor use, DIY and light residential construction jobs, including levelling chair rails and hanging cabinets. By projecting bright red vertical and horizontal lines onto flat surfaces, users can easily level what they are installing. The Cubix™ is protected by a durable, overmoulded housing. It projects a red vertical line and horizontal line. Fitted with a touch pad control panel, locking pendulum and a 3 position lock switch with manual mode. Supplied with: 1 x Protective Pouch1 x Removable QuickLink™ Bracket2 x AA batteries1 x Quick Start Guide Specification: Level Accuracy:0.6mm/mWorking Range: 12mPower: 2 x AA batteries (supplied)Thread: 1/4in

The Stanley FatMax 77-123 CLLi Cross Line Laser Kit has a 25m range for use in an interior or exterior working environment. It projects 1 horizontal and 1 vertical line to create a cross line, making this ideal for quick layout jobs. It has an Out of True level sensor, magnetically damped pendulum and a pendulum lock for safe transportation. Supplied with a 2.7m Floor to Ceiling Pole Kit. Specification: Level Accuracy: 4mm @10mWorking Range: 25mPower: 3 x AA batteries (supplied)Laser Class: 1Thread: 1/4in

The Stanley Intelli Tools C-Line Cross Line Laser Level projects bright red vertical and horizontal lines onto flat surfaces. Perfect for DIY and light residential construction jobs including levelling chair rails and hanging cabinets. Users can easily ensure that the item they are installing is level. Fitted with a 3-position pendulum lock (on/off/manual mode) for safe transportation. Rated to IP50 to protect against dust. Supplied with a magnetic L-Bracket. Specification: Level Accuracy: 6mm @10mWorking Range: 10mPower: 2 x AA batteries (supplied)Protection: IP50 RatedThread: 1/4in

The DEWALT DCE0825D1G 5 Spot Cross Line Laser Green projects a full cross line (horizontal vertical) and 5 independent spot points. The cross line function features a 150 fan angle, providing ample coverage with little set-up time. It has an integrated magnetic bracket, so it can be directly mounted to metal track, ensuring accurate projections all around. The body of the level is IP54 rated, meaning it is resistant to debris/water. The overmoulded housing and thick glass protect the tool and helps maintain calibration under jobsite conditions. Full-time pulse mode allows use with detector (NOT SUPPLIED) which help to maintain full brightness for visibility and extends range. Supplied with: 1 x 12V 2.0Ah Li-ion Battery, 1 x DCB107 Battery Charger, 1 x Target Green Card, 1 x Green Glasses, 1 x Integrated Magnetic Bracket and 1 x TSTAK Compatible Kitbox. Specification: Laser Class: 2, Level Accuracy:3mm@10m.Self-Levelling Range: 4.Visibility: Indoor: 30m, Dot: 45m.Thread: 1/4in.

The DEWALT DW089K is a 3-Way Self-Levelling Multi Line Laser used for marking Horizontal, Vertical and Side Lines. With overmoulded housing which helps maintain calibration under jobsite conditions. an adjustment dial for fine line movement (vertical side) with built-in magnetic pivot bracket mounts easily on metal surfaces. The 3 button operation and low battery indication allows for ease of use and is accurate to0.3 mm/m in levelling applications with self-levelling up to 4 degrees surface angle with automatic out of level indication, marks a levelled line in seconds. Can be used for a variety of applications: acoustical drop ceilings, cabinet installation, chair rail installation, electrical outlet installation, interior trim carpentry, raised flooring installation, and bathroom and kitchen tiling installation. Supplied with: 1 x Wall Mount Bracket, 1 x Heavy-Duty Carry Case and 4 x AA Batteries. Specification: Level Accuracy0.3 mm/mWorking Range: 15m Indoor (up to 50m with Detector)Power: 4 x AA batteries (supplied)Laser Class: 2 <1mWBeams: 3 vertical/horizontal/sideThread: 1/4inWeight: 0.8kg

The DEWALT DW088K 2-Way Self-Levelling Line Laser is accurate to0.3mm/m in levelling applications. Self-levelling up to 4 surface angle with automatic out of level indication. It uses a simple 2 button operation with a low battery indication for ease of use. The built-in magnetic pivot bracket mounts easily on metal surfaces, whilst the overmoulded housing and thick glass protects the tool and helps maintain calibration under jobsite conditions. The included kit box helps to protect the unit and helps maintain calibration when stored in the gang box. Supplied with: 1 x Wall Mount Bracket, 1 x Heavy-Duty Carry Case and 3 x AA Batteries. Specification: Laser Class: 2, Level Accuracy:0.3mm/mSelf-Levelling Range: 4Visibility Indoor: 15m (50m with Detector)Power: 3 x AA batteries (supplied)Thread: 1/4inWeight: 0.46kg

The DEWALT DW088CG Cross Line Green Laser is self-levelling up to 4 and accurate to0.3 mm/m in levelling applications. It has an integrated magnetic pivoting base with 1/4in thread for use with tripod. With automatic out of level indication that can mark a levelled line in seconds and maintains full brightness for visibility. The body of the level is IP54 rated, meaning it is resistant to debris/water. The overmoulded housing and thick glass protect the tool and help maintain calibration under jobsite conditions. Full-time pulse mode allows use with detector. Works with DE0892G detector (not supplied) up to the distance of 50 metres. Specification: Laser Class: 2, Level Accuracy:3mm@10mSelf-Levelling Range: 4Visibility Indoor: 20mThread: 1/4inPower: 3 x AA batteries (supplied)

This Stanley 10788 Instant Change Retractable Blade Utility Knife features an instant change tool, a free push button blade change for hassle free blade changes. Its interlocking nose design holds blades firmly in place, preventing nose spread and body separation which might otherwise cause blades to break-loose and cause injury.This knife has a long-lasting, strong, and durable construction featuring a cast metal core with bi-material soft panels for a comfortable grip. There is an integrated string and foil cutter so there is no need to expose the blade for these simple jobs. It has a convenient hang hole for lanyards, tethers, and safe storage and the handle will store up to 5 blades. Ideal for general purpose, DIY and construction cutting applications.This knife accepts most types of replacement Stanley utility blades. Specification: Length: 180mm.

The Stanley Safety Wrap Cutter is made from lightweight, but tough, ABS plastic and is ideal for use in warehouses for cutting shrink wrap, banding, opening boxes and cartons. This Stanley cutter has a specially shaped blade anvil and a full D-shaped handle for protection. The blade is replaceable. Specifications:STA010245: one replacement blade.

Multi-position retractable knife moulded in ABS for lightweight durability.The blade is held in a steel carrier and there are 5 blade adjustments.Features easy blade change system where no tools are required.Supplied with 1 blade.

This Irwin ProTouch Retractable Blade Knife is ideal for general maintenance jobs. It has a lightweight, hard-wearing aluminium body which gives 6 times longer life. It also has thicker walls in areas of greatest wear, e.g., nose underside, and heel. The blades are virtually unbreakable, and have a quick blade change feature, spring-loaded push-button opener. It is designed to fit the hand, allowing maximum grip, and minimum wrist distortion. The blade slider is held permanently in place whilst a magnet holds the working blade in place. Spare blades are held securely so there is no edge damage, and no rattle, featuring a hinged opening mechanism. This knife has an optimised cutting angle to minimise fatigue and includes magnetic blade retention, and storage for up to 5 blades. Patented quick blade release for easy renewal of sharp blade edge.

The Faithfull Professional Safety Utility Knife has a spring-loaded blade holder that automatically retracts when the slider button is released to keep the blade out of harm's way. The die-cast metal body has an interlocking nose design to reduce sideways blade movement, a dual compound ABS and TPR soft grip for comfort, and a hole for attaching to a lanyard. No tools needed for blade change. Simply unscrew the side button and pull the knife sides apart to reveal the internal 5 blade storage compartment and change blades. Ideal for use as a box cutter in retail, warehouse and factory environments. Accepts standard heavy-duty trimming knife blades. Supplied with 5 x SK5 steel blades. Specification: Retracted Length: 150mm (6in).

Supplied with a 25 x 125 x 0.7mm, 7 segment SK5 steel blade. Spare blade code: FAITKBS25 - Pack of 10 Blades. Specification: Overall Length: 232mm (9in)

This Faithfull Heavy-Duty Retractable Snap-Off Trimming Knife is supplied with an 18 x 100 x 0.5mm, 8 segment, SK5 steel blade. Spare blade code: FAITKBS18 - Pack of 10 Blades. Specification: Overall Length: 195mm (7.1/2in)

The Faithfull Professional Auto-Load Utility Knife features a 3 position button for blade depth setting and a quick-release blade change with an auto-load blade mechanism - it will automatically load the next blade without the need to open the knife. The die-cast metal body has an overlapped nose design for strength, a dual compound ABS and TPR soft grip for comfort, and a hole for attaching to a lanyard. No tools are needed to refill the blade chamber. Simply push the button on the side of the knife to open. The refill chamber holds 5 blades and there is additional storage for a further 5 blades inside the knife. Supplied with 5 x SK5 steel blades. Specification: Retracted Length: 175mm (7in).

The Faithfull Professional Retractable Utility Knife features a quick-release blade change, a 3 position button for blade depth setting, and a safety cutter slot for string and plastic banding. The die-cast metal body has an interlocking nose design to reduce sideways blade movement, a dual compound ABS and TPR soft grip for comfort, and a hole for attaching to a lanyard. No tools are needed to access the blade storage. Simply pull the top-mounted blade compartment upwards for access. Supplied with 5 x SK5 steel blades. Specification: Retracted Length: 172mm (7in).

The Faithfull Professional Fixed Blade Utility Knife holds the blade securely and firmly with no movement, making it ideal for heavy-duty cutting. Its die-cast metal body features an overlapped nose design for strength, a dual compound ABS and TPR soft grip for comfort, and a hole for attaching to a lanyard. The knife can be unscrewed to reveal the internal 5 blade storage compartment and enable blade changes. Accepts standard heavy-duty trimming knife blades. Supplied with 5 x SK5 steel blades. Specification: Length (without blade): 160mm (6.1/4in).

These Faithfull Snap-Off Blades have the following specification: Height: 9mmLength: 80mmThickness: 0.4mmSegments: 13Pack Quantity: 10

These Faithfull Snap-Off Blades have the following specification: Height: 25mmLength: 125mmThickness: 0.7mmSegments: 7Pack Quantity: 10

These Faithfull Snap-Off Blades have the following specification: Height: 18mmLength: 100mmThickness: 0.5mmSegments: 8Pack Quantity: 10

The Bahco sports knife has a durable aluminium handle, with stainless steel blades and mechanism. The blades lock securely into position when fully unfolded and are only released with the unlock button. This avoids accidental folding. With a small hole on the back end, the knife allows for a safety strap to be attached. This BAHBSTK Twin Blade Sports Knife features two different blades - one standard utility blade and one sports knife blade with serrated edges. Blade length: 70mmWeight: 202g

This Bahco sports knife has a durable polyamide handle, with stainless steel blades and mechanism. The blade locks securely into position when fully unfolded and is only released with the unlock button. This avoids accidental folding. With a small hole on the back end, the knives allow for a safety strap to be attached, for added safety. The BAHBSLK knife uses utility blades, which can be replaced when blunt.

The Bahco Sports Knife has a stainless steel blade with a serrated portion. Locking mechanism for safe use, blades lock securely into position when fully unfolded. Fitted with a durable aluminium handle. A small hole on the back end of the knife allows for a safety strap to be attached.

The Vaughan Drilling Club hammer designed for striking star drills, cold chisels, brick bolsters, and punches. With rust-resistant blue finish and polished striking faces with generous bevels. Forged from high-carbon steel and with a patented Shock-Blok™ plug in its head, using hickory and rubber to absorb shock. Exclusive air cushioned slip-resistant grip for comfortable use. Made in the USA. Weight: 3 lb.Handle Length: 280mm (11in).

This Vaughan California Framing Hammer with polished California Framer style head and round neck and face. Forged from high-carbon steel and with patented Shock-Blok™ plug in its head, using hickory and rubber to absorb shock. An exclusive air cushioned, slip-resistant grip provides comfortable use. Made in the USA. Weight: 540g (19 oz.)Handle length: 405mm (16 inch)Face: Milled.

The Vaughan E18F Electricians Hammer has a fibreglass handle. Its head is fully polished and forged from high-carbon steel for excellent strength. It has a round extra-long pole, meaning it is ideal for reaching into electrical junction boxes. The Electricians Hammer has a patented hollow core in its fibreglass handle to absorb shock and provide superb balance. It has a steel wedged and epoxy-sealed eye and an exclusive air cushioned, slip-resistant grip. Weight: 510g (18oz).Handle length: 355mm (14in). Made in the USA.

One soft grey and one hard white face.Diameter 38mm (1 1/2 in).Weight: 650g (1 1/2lbs).

Roughneck Double Ended Scutch Hammer which is ideal for all types of stone dressing. They are used for preparation of surface prior to rendering. The double ends make it ideal to have two sized scutch combs attached for different work surfaces. Unique treble injected TPR soft-grip handle for comfort during use and for reduced fatigue.

The Faithfull Bricklayer's Single End Scutch Hammer has a hardened square striking face at one end with a single comb slot at the opposite end to fit replaceable one inch scutch combs or chisel bits (droves). Fitted with a traditional hickory handle. These specialist hammers are the most commonly used tools for dressing and cleaning bricks.

These wedges are designed for use in conjunction with the correct wooden handle when replacing damaged handles on hammers, axes and other striking tools. Includes malleable steel hammer wedges and wooden wedges and when fitted correctly, they provide a secure and safe attachment of a striking head to a wooden handle. Kit consists of 2 Steel Wedges : 12mm Width (Size 1)1 Wooden Wedge : 17 x 25mm Suitable for head weights 4oz to 1lb 2 Steel Wedges : 15mm Width (size 2)1 Wooden Wedge : 25 x 35mm Suitable for head weights 1lb to 2.5lbs 2 Steel Wedges : 18mm width (size 3)1 Wooden wedge : 30 x 30mm Suitable for head weights 3lb to 7lbs 2 steel wedges : 21mm width (size 4)1 wooden wedge : 30 x 40mm Suitable for head weights 10lb to 28lbs Note Hammer wedges are NOT suitable for use with fibreglass replacement handles.

The Faithfull Bricklayer's Double Ended Scutch Hammer specifically designed for dressing bricks and masonry. Fitted with a fibreglass handle which is lightweight, extremely strong and resistant to moisture.Also available are replaceable one inch scutch combs or chisel bits (droves).; SAFETY TIPWear safety spectacles, or goggles, when hammering.Never use hammers to strike hardened metal.Strike squarely and avoid glancing blows.Never strike with the side of a hammer.Do not use a hammer with a loose or damaged head.Remember that left for a long time in very dry conditions, wood can dry out. Always check to ensure that this has not happened to your handle.Always use the correct hammer for the job.

The BlueSpot 26200 1.1kg (2.4lb) Fibreglass Lump Hammer features a soft feel handle for a more secure grip. The fibreglass shaft reduces fatigue and increases shock absorption during prolonged use. The striking face has a bevelled edge to protect against chipping the hammer.Specification: Weight 1.1kg (2.4lb).

The BlueSpot Steel Shafted Claw Hammer features a contoured handle for a more secure grip. Its steel shaft reduces fatigue and increases shock absorption during prolonged use. The striking face has a bevelled edge to protect against chipping the hammer. Weight: 16oz (450g)

Bahco 2-303-16-2-0 square needle cut file with parallel surfaces which taper to a point. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Surfaces are double cut. Size: 16cm.Cut: 2 (smooth).Type: square needle.File width: 2.4mm.Teeth per cm: 38.

Bahco Knife Needle File Unhandled Cut 2 Smooth 2-308-16-2-0 160mm (6.2in). This file is used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. It is for fine filing and polishing jobs.Edges and surfaces taper to a point. Length: 160mmWidth: 5.4mmTeeth per cm: 38Cut: Smooth

Bahco Flat Needle File Cut 2 Smooth 2-301-16-2-0 160mm (6.2in). Ideal for fine filing and polishing jobs. This file is used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.The surfaces are double cut and the edge are single cut.File length: 160mmFile width: 5.45mmFile thickness: 1.2mmTeeth per cm: 38Type of cut: smoothWeight: 8g

This Bahco ERGO™ File Set is perfect for fine filing and polishing jobs. The handle has been developed according to the scientific ERGO™ process. Supplied in a snap-shut plastic wallet with a hanging hole. Contains one of each handled file: hand, warding, square, three-square, half-round and round. Specification: Type of Cut: SmoothBlade Length: 100mm

Set of 12 needle files in snapshut plastic wallet with hanging hole. One of each of the following : Hand, flat, half-round, round, three-square, square, crossing, knife, barrette, slitting, round edge joint and marking files, with handle included. For fine filing and polishing jobs.Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Size: 16cm.Cut: 2 (smooth).Type: Needle set (12).

Bahco set of 6 needle files in snapshut plastic wallet with hanging hole. This set contains 1 of each of the following: flat, flat tapered, half-round, round, three square and square smooth cut files and includes one handle. They are excellent for fine filing and polishing jobs and are used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Size: 16cm.Cut: 2 (smooth).Type: Needle set (6).Teeth per cm: 38

This Trend GRAB/SE1/set Damaged Screw Remover Set (2pc) has versatile double-ended bits to remove damaged screws, machine screws and broken bolts from wood, metal and plastic. Made from high-speed steel they can remove screw sizes from Nos. 6 - 14 and broken bolts from size M4 - M8, they will remove these cleanly from wood, metal or plastic.Removing screws made of any alloy, including soft brass, and also removes free spinning screws. They have a Winslow tip for self-centring and are double ended (burnisher and tapered thread). The hex shoulder aids removal of jammed screws or bolts and the serrated extracting end of the tool results in torque for hard to remove screws. Specifications: Set of two bits, Size No 2 and No 3.Screw Sizes: No 6 to No 14.Bolt Sizes: M4 to M8.

Screw pitch gauges quickly determine the pitch of various external and internal threads. These gauges consist of a substantial steel case with a number of folding leaves at both ends, each leaf having teeth corresponding to a definite pitch. Whitworth standard - 55 threads No. of leaves: 30 TPI range: 3 1/2 - 60 With positive stop.

Supplied with a tapping drill.Kit 1/2 Whit x 12 tpiLength 1 1/2 X Diameter

Supplied with a tapping drill.Kit 3/8 Whit x 16 tpiLength 1 1/2 x Diameter

Supplied with a tapping drill.Kit 5/16 Whit x 18 tpiLength 1 1/2 X Diameter

Supplied with a tapping drill.Kit 1/4 Whit x 20 tpiLength 1 1/2 x Diameter

Kit 1/4 BSP x 19tpiLength 1 1/2 x Diameter

Kit 3/8 BSF 20tpi

Kit 5/16 BSF 22tpi

Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplifiy changeover from unified to metric or vice versa.They reduce thread wear and are interchangeable with other brands of inserts or tooling. Size. 1/4 BSF X 26TPI Length. 1 1/2 x Diameter.

An extremely handy pocket sized reference booklet of data charts and tables for the drawing office, toolroom or workshop. This metric revision publication is produced by Zeus Precision Charts Ltd, who are members of the British Standards Institution. The 28 laminated pages contain data on standard drill sizes and decimal equivalents, tapping drills and clearances for metric and imperial threads, BS4500 tolerances, hardness comparisons, jig boring co-ordinates for equally spaced holes, allowances for sheet metal bending and Morse tapers. Also, long tables for sine, cosine, tangents and cotangents.

The Moore Wright 891 Series Adjustable Depth Micrometer features interchangeable depth rods, with a 4mm diameter. These adjustable depth micrometers conform to BS6468:1984. Base Length: 63.5mm / 2.1/2in. The Moore Wright 891M150 Adjustable Depth Micrometer has the following specification: Range: 0-150mm.Resolution: 0.01mm.

The Moore Wright 890M Fixed Type Depth Micrometer has a fixed depth rod with a 6.5mm diameter. It is fitted with a 'speeder' type ratchet and a lock screw for added user convenience. Conforms to BS 6468:1984. Specification: Base Length: 63.5mm (2.1/2in)Range: 0-25mmResolution: 0.01mm

The Moore Wright MW496-01 Magnetic Snake Stand has a corrosion resistant chrome plated flex arm that will hold rigidly in almost any position. The V-shaped base is perfect for mounting on rounded surfaces. There is a powerful magnetic base that can be turned on and off depending on the user requirements and the magnetic force is equal to 40kg/85lbs.

The Moore Wright MW475-01 Magnetic Indicator Stand features fine adjustment and accepts dial test indicators, digital indicators, and normal indicators. It is a universal model which can be used for indicators with or without a lug style back plate. The stand's powerful magnetic base can be turned on and off depending on the user requirements, and there is a magnetic force of 80kg/175lbs.

The Moore Wright 200 Series Digital External Micrometer has a tapered design that provides easier access to difficult areas and a hammertone finished frame with a high quality insulated grip. It also has tungsten carbide measuring faces and a constant force ratchet on the thimble. The large LCD display allows for 4 types of measurement (mm/inch conversion and Absolute/Incremental reading) and a zero setting. The micrometers are manufactured to DIN 863 standards. Specification Range: 0-25mm/0-1in.Resolution: 0.001mm/.00005in.