Bondloc B2001 is a hand kneadable, specialty epoxy putty that mixes for permanent repairs to many substrates. Contains fading black dye that becomes grey after mixing. May be applied under water (fresh or salt). Bonds to fibreglass, metal, wood, concrete and glass. Will not yellow to UV exposure. Hardens in 10 minutes, back in service in an hour, full strength in 24 hours. Can be used for repairing tanks and drums, patching holes in pipes, stopping leaks and repairing porosity holes in castings. Specification: Typical Properties: 7 days cured at 24CColour: Black, changes to grey after mixingViscosity: putty/hand kneadablePot Life @24C: 20 minutesComprehensive Strength: 83 N/mm2Adhesive Tensile Shear: 5 N/mm2Cured Hardness Shore: D 75Dielectric Strength: volts/mil 300Solids: 100%Temperature Resistance: Wet: 49C, Dry: 121CSize: 50g

Bondloc B572 White Pipe Seal is designed for the locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. The thixotropic nature reduces the migration of liquid product after application to the substrate. Has a good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol and Brake Fluid. B572 is unusual in that it does not fully cure until some 60 hours after application, allowing for re-alignment of elbows and joints. Replaces tapes and dopes, stops gas and fluid leaks on most metals and assists in lubricating during assembly. Will not shred or tear which would contaminate your system. Use it to seal against oils, gases, chemicals, water and steam etc. Specifications: Resin: Dimethacrylate.Colour: White paste.Cure speed with activator: Not recommended.Cure speed Without Activator: up to 60 hours.Viscosity Brookfield Sp3 @ 20rpm: 20,000cps.Gap fill / Max threadform: 0.4 mm / M36.Flash Point: >85C.Shelf Life: 36 months @ 20C. Specific Gravity: 1.25.Max Operating Temperature: -55C to 150C. Cured Performance: Full Cure Time: 60 hours.Typical breakaway strength: 6 N.m.Typical prevailing strength: 2 N.m. Size: 50ml.

Bondloc B577 Pipe Seal is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its Anaerobic cure system in contact with metals in the absence of air (oxygen). When fully cured it resists pressure up to 350 bar. B577 is not suitable for oxygen systems. Good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol, Acetone and Brake Fluid. Typical applications are in sealing of all types of threaded connections against water, oil, gases and most common materials conveyed by pipes. Specification: Resin: Dimethacrylate.Colour: Yellow.Cure Speed with Activator: <10 minutes.Cure Speed without Activator: <15 mins @ 20C.Viscosity: >50,000 cps.Gap Fill: 0.05mm to 0.4mm.Flash Point: >100C.Shelf Life: 12 months @ 20C.Specific Gravity: 1.09.Max. Operating Temperature:150C. Cured Performance: Full Cure Time: 6-12 hours.Typical Breakaway Strength: >6 to <15 N/mm (2).Prevailing Torque: >3 to < 9 N/mm (2).Static Shear Strength: >5 to <15 N/mm (2). Size: 50ml.

Unibond No More Nails is a high strength grab adhesive that eliminates the need for nails and screws in many DIY and repair jobs. It is safe and easy-to-use, adheres to most building materials and can be used to fill minor gaps on uneven surfaces. No More Nails is ideal for fixing skirting boards, dado rails, architraves, coving, polystyrene mouldings, decorative wall panels, plasterboard, carpet and carpet grippers and worktops. Dries translucent.1 x Unibond No More Nails Invisible Cartridge 285g

Unibond No More Nails Exterior is a high strength adhesive that eliminates the need for nails and screws in many DIY and repair jobs. It provides one of the strongest initial grabs available from Unibond, for un-paralleled support for heavier objects. It is extremely versatile and adheres to most building materials. Dries white. Suitable for exterior use.

Colour: Natural

Colour: Grey.

1 x Everbuild Stixall Extreme Power Easi Squeeze White 80ml

1 x Everbuild Stixall Extreme Power Easi Squeeze Crystal Clear 80ml

Colour: Clear.

Colour: Brown.

Colour: Black.

Pinkgrip Dry Fix is a revolutionary new type of fast curing, adhesive foam that has been specially developed for the rapid installation of Plasterboard, Insulation Boards and other sheet materials such as Roof Decking and Floorboards. Pinkgrip Dry Fix provides significant labour saving and convenience benefits when compared to traditional dry wall adhesives. It will bond to most common building substrates; can be applied horizontally or vertically to boards, walls or battens/beams. The foam expands very minimally on application but enough to fill any gaps on uneven surfaces. Pinkgrip Dry Fix can be applied using an Everbuild Dry Fix Applicator Gun.

Everbuild Gun A Nail Standard is a high strength, gap filling multipurpose building adhesive based on a tackified solvent free system for use in a wide variety of building and home improvement applications. Gun A Nail Standard can be used where at least one of the substrates to be bonded is porous. BENEFITS- Solvent-free - environmentally friendly formulation- Excellent adhesion/bond strength - adheres to most common surfaces.- Exceptional early grab properties - usable in both vertical and horizontal positions. - High solids formulation - excellent gap filling properties without shrinkage.- Extended open time - allows for easy repositioning after fixing- Will adhere to damp surfaces.- Water clean up - no hazardous solvents. AREAS FOR USE- Bonding dado rails, architraves and skirting- Fixing wall cladding direct to internal wall surfaces or timber battens- Fixing battens directly onto walls without fastenings- Bonding carpet gripper systems to most floors without the need for nails or tacks- Bonding stair nosing to concrete or wooden stairs- Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans.

Colour: White.

Pinkgrip is a revolutionary direct bond adhesive specifically formulated for the professional user, using polymers at the leading edge of adhesive technology. Pinkgrip will stick just about anything on a building site that needs sticking. Its amazing grabbing strength not only removes the need to pin under the work piece to prevent slumping, but its revolutionary initial Direct Bond eliminates the need for double stick methods. Pinkgrip can be used inside and outside and adheres to just about every building substrate, providing the following key benefits: - Enhanced slump resistance for quick and simple direct bonding to most substrates without the use of temporary supports in most applications. - Excellent early and ultimate adhesive strength on porous substrates. - Excellent gap filling properties to accommodate uneven surfaces. - Good nip off qualities to prevent messy stringing of the adhesive Size: 350ml cartridge.

Bostik DIY Hot Melt Glue Sticks can be used with the DIY Hot Melt Glue Gun for an ultra-strong, long-lasting bond in seconds on a wide range of materials, and are easy to insert. Specification Length/Diameter: 100 x 12mm

Bostik Handy Glue Sticks can be used with the Handy Hot Melt Glue Gun for an ultra-strong, long-lasting bond in seconds on a wide range of materials, and are easy to insert. Specification Length/Diameter: 102 x 7mm

Bostik Handy Glue Sticks can be used with the Handy Hot Melt Glue Gun for an ultra-strong, long-lasting bond in seconds on a wide range of materials, and are easy to insert. Length/Diameter: 300 x 11mm

The Rapid EG Point Glue Gun is a mini glue gun for precise work. It is ideal for DIY and craft. The glue gun can be used cordlessly for 3-4 minutes before reconnecting to the detachable cable for difficult to reach places or awkward angles. It operates between 170 to 200C and has an improved, built-in stand for better stability. Compatible with Rapid 7 mm glue sticks. 2 year guarantee. Input Power: 10 (80W).Heating Time: 10 mins.Tip Diameter: 0.7mm.Glue Output: 150g/h.Material: ABS and metal.

The Rapid EG380 Glue Gun is a powerful gun designed for industrial use, equipped with a 2-heater system with a total of 400 watts providing a glue output of 2200 gr/hour. It is ideal for use on PVC, for sealing cables and tiles, electronics and electrics, furniture and wood, manual carton sealing, trade exhibits and decoration. It can be used with both low and high temperature 12mm diameter glue sticks and the temperature is adjustable from 130 to 230C, the temperature settings are 130 C, 150 C, 170 C, 190 C, 210 C and 230 C Its strong feeding mechanism allows a higher glue output per trigger stroke for intensive use, and it has a 4-minute heating time. Interchangeable nozzles (available to purchase separately) and an adjustable stand allow this glue gun to be used for all types of jobs. The smooth-4 finger soft grip trigger and ergonomic lightweight design ensures comfort over long term use and reduces the effort required. Comes with a 2-year guarantee. SpecificationInput Power: 400W.Working Voltage: 220V-240V.Heating Time: 1 min at 130 C, 3 min at 210 CTemperature Settings: 130 C, 150 C, 170 C, 190 C, 210 C and 230 CGlue Output: 2200gr/hour.Glue Stick Diameter: 12mm.Regulation: Mechanical Thermostat.Nozzle: 3.5 mm, exchangeableCord Length: 3.5m.

The Rapid EG340 Glue Gun is designed for pro-industrial users who need a powerful glue gun for high intensity use that works with different type of glues. It is ideal for use on PVC, for sealing cables and tiles, electronics and electrics, furniture and wood, manual carton sealing, trade exhibits and decoration. The EG340 is equipped with a heater system of 220 watts, a very accurate, low effort 4-finger soft grip trigger mechanism allowing the best ratio pressure/transfer into the melting chamber and a soft grip handle for high comfort. It can be used for both low and high temperature 12mm diameter glue sticks and the temperature is adjustable from 120 to 220C, the temperature settings are 120C, 145C, 170C, 195C and 220C. The high glue output of 1400g/hour is ideal for intensive use and the 2-minute heating time ensures it is ready to use when needed. Interchangeable nozzles (available to purchase separately) and an adjustable stand allow this glue gun to be used for all types of jobs. Comes with a 2-year guarantee. SpecificationInput Power: 220W.Working Voltage: 220V-240V.Heating time 1 min at 130 C, 3 min at 210 CTemperature Settings: 120/145/170/195/220C.Glue Output: 35g/min - 1400gr/hour.Glue Stick Diameter: 12mm.Regulation: Mechanical Thermostat.Nozzle: 3.0 mm, exchangeableCord Length: 2.5m.Supplied with a fixed and a mobile stand

The Rapid EG320 Glue Gun is a compact, lightweight and versatile gun for use in many conditions. It is ideal for use on PVC, for sealing cables and tiles, electronics and electrics, furniture and wood, manual carton sealing, trade exhibits and decoration. The EG320 is equipped with a heater system of 120 watts and a low effort, 4 finger soft grip trigger mechanism for comfort of use. It is for use with 12mm diameter glue sticks and has a pre-set, fixed temperature of 195C which is self-regulated. The glue output of 1000g/hour is ideal for intensive use and the 3-minute heating time ensures it is ready to use when needed. Interchangeable nozzles (available to purchase separately) and an adjustable stand allow this glue gun to be used for all types of jobs. SpecificationInput Power: 120W.Working Voltage: 220V-240V.Heating Time: 4 minutes (195C).Temperature Settings: 195C.Glue Output: 1.000g/h.Glue Stick Diameter: 12mm.Regulation: Self-regulated.Nozzle: 3.0 mm, exchangeableCord Length: 1.75m.

The Rapid EG212 Multi-Purpose Glue Gun is ideal for DIYers and hobbyists. It can be used on all kinds of material for decoration and simple repair jobs. Its compact size and balance allow it to be used in all conditions and at all angles. The bi-material, soft grip trigger mechanism and adjustable stand ensures comfort of use, and the nozzle is protected by silicone. This glue gun is for use with 12mm glue sticks and has a 3–6-minute heating time and 250g/hour glue output. SpecificationInput Power: 200W.Working Voltage: 220V-240V/50Hz.Heating Time: 3-6 minutes.Glue Output: 250g/hour.Glue Stick Diameter: 12mm.

The Rapid EG111 Glue Gun is a perfect all-round glue gun for DIY jobs and easy repairs around the home. It is compatible with all Rapid 12mm diameter glue sticks. It has a lightweight design and is easy to use, it heats up in less than 5 minutes. The silicone nozzle protects against burns and it has a removable metal stand, for better stability when standing. Comes with a 2 year guarantee. Supplied with 500g of transparent 12mm diameter x 190mm length glue sticks. Specifications: Working Voltage: 220V-240V/50Hz.Heating Time: 5 minutes max. Glue Stick Diameter: 12mm.

Heavy-duty glue gun, ideal for DIY tasks and household repairs with an ultra strong long lasting bond. It has constant thermostatic control, safety warning light and trigger control to glue on demand. Includes 2 glue sticks and CE approved. Specification: Input Power: 55WGlue Stick Diameter: 12mm

The Bostik Handy Hot Melt Glue Gun is ideal for hobbies and light household repairs. Compact and easy to use. Its trigger control allows for consistent application and it comes with its own retractable stand. Includes 2 glue sticks. Specification Input Power: 45WGlue Stick Diameter: 7mm

Everbuild STICK2 All-Purpose Clear Adhesive is a strong, clear, quick drying adhesive suitable for a variety of household repairs and hobby uses. Will stick ceramics, porcelain, pottery, wood, card, paper, most plastics, leather, cork, linoleum, rubber, stone, glass, metals and dense fabrics to both themselves and each other. Always open and use this product over a protected work surface. Surfaces to be bonded must be clean, dry and free from dust. Use only in well ventilated areas. Do not breathe vapour. POROUS SURFACES (fabrics, ceramics etc.) Unscrew cap and spread a thin even layer of adhesive onto one surface. Press two surfaces together firmly. NON-POROUS SURFACES (plastics, metals etc.) Improve adhesion by abrading both surfaces with sandpaper. Unscrew cap and spread a thin even layer of adhesive onto both surfaces. Allow adhesive to dry to a tough tacky finish (about 5-10 mins) then press both surfaces together firmly.In both cases, full strength is obtained after 24 hours at 20CReplace cap immediately after use to keep adhesive usable.

1 x Bostik All Purpose Adhesive 50ml

1 x Bostik All Purpose Adhesive 20ml

Everbuild Lumberjack 550 Floor Adhesive is a high specification, hybrid polymer, cartridge applied adhesive specially designed for fixing all types of wooden floors directly onto all common substrates. It is a 100% active solvent and water-free, and therefore will not cause warpage of wood. Has rapid setting properties and remains permanently flexible. It is also suitable for use with underfloor heating, and has excellent acoustic properties. Colour: Buff.Size: 300ml.

Everbuild STICK2 Instant Bond Contact Adhesive is a premium grade, rubber-based contact adhesive suitable for internal and external use with decorative laminate, trim, wood, rigid PVC, ABS, leather, cork, linoleum, rubber, stone, metals and dense fabrics. 1 minute instant bond.

Bostik Contact Adhesive is an ultra strong, water resistant, clear adhesive. It is a quick drying adhesive with immediate strength on contact. Ideal for DIY and household repairs on a wide range of materials including wood, hardboard, metals, rubber, hard plastics, laminates, and leathers.

1 x Bostik Blu Tack Handy Pack - White

1 x Bostik Blu Tack Economy Pack

1 x Bostik Blu Tack Handy Pack

Sylglas Plumber Fix is purpose designed as a permanent leak sealant for piping and tanks and can be used on most materials EXCEPT soft plastic materials. Ideal for sealing weeping, sweating and burst metal pipes, radiators, tanks and cylinders. Plumber Fix is a 2-part epoxy (with resin and hardener of differing colours so that when kneaded together, complete mixing is easily observed) that hardens to form a strong, waterproof, self-adhesive seal.

STICK2 Rapid Epoxy, Tubes

STICK2 Rapid Epoxy Syringe Adhesive

The Araldite Instant is a strong, fast-setting epoxy resin adhesive. It is safe, easy to use and only takes 90 seconds to set and sets clear. It is perfect for jobs requiring speed and high transparency. This strong, long-lasting solvent-free adhesive is supplied with a syringe to ensure the two parts of the epoxy resin are dispensed in equal measure. It Is also water resistant, suitable for painting or sanding and has a high temperature resistance (-30C to 80C).The product is suitable for use on a wide range of materials including (but not limited to) metal, wood, ceramics, glass, dry concrete, cardboard, leather, and most plastics. The Instant bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber, and most plastics (except polyethylene, polypropylene, Teflon, and polystyrene). This adhesive has an environmentally friendly product formulation and has eco-friendly packaging for easy recycling.Specification: Size: 24ml Syringe.

Araldite Steel Epoxy is a strong, long-lasting solvent-free adhesive which is water-resistant and can be painted or sanded. Perfect for jobs on metal like plumbing, car bodywork, gates and windows. With an environmentally sound product formulation it is recommended for use on most types of metal including steel, galvanised steel, cast-iron, copper and brass and it will set quickly in around 5 minutes achieving full strength in just 4 hours. 2-component epoxy with fast setting, handling time of 1 hour. Will not rust. Metallic grey colour. Fills gaps for uneven breaks. Parts repositionable for 4 minutes, with permanent full bond strength in 4 hours. High temperature resistance (-30C to 100C). Oil, chemical and impact resistant.

The Araldite Crystal Epoxy is a strong, long-lasting solvent-free adhesive which is water-resistant and can be painted or sanded. Perfect for jobs which require invisible joins or high transparency. Craft and hobby enthusiasts will appreciate the clear finish and Araldite Crystal is ideaL for use on decorative or repair products including glass, jewellery, ceramics, china, and porcelain, as well as more mundane materials such as metal, wood, leather, fabrics, and rubber. Not suitable for use on items which contact food or drink. Araldite Crystal will give you an initial setting time of 5 minutes with full, permanent bond strength achieved in 3 hours. The 2-component epoxy adhesive with fast setting, and dries crystal clear. Parts repositionable for 5 minutes. Oil, chemical and impact resistant. High temperature resistance (-30C to 80C). Size: 2 x 15ml tubes.

The Araldite Standard Epoxy Syringe is a strong, solvent-free adhesive suitable for all materials, ideal for durable bonding and repairs. Perfect for complicated jobs that require adjustment thanks to a long working time. It has a long working time with parts positionable for around 80 minutes, so is ideal for projects and complicated heavy-duty work on metals, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, card, fabrics, rubber and many plastics. It achieves a full ultra-strong bond in around 14 hours and when used in line with the instructions printed on the pack will give you dependable, long-lasting results. Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon). The 2-component epoxy with long 'working time'. Parts repositionable for 80 minutes. Oil, chemical and impact resistant. High-temperature resistance (-30C to 80C). Withstands rough handling.

The Araldite Standard Epoxy is a strong, solvent-free adhesive suitable for all materials, ideal for durable bonding and repairs. Perfect for complicated jobs which require adjustment thanks to a long 'working time'. It has a long working time with parts positionable for around 80 minutes, so is ideal for projects and complicated heavy-duty work on metals, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, card, fabrics, rubber and many plastics. It achieves a full ultra-strong bond in around 14 hours and when used in line with the instructions printed on the pack will give you dependable, long-lasting results. Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon). 2-component epoxy with long 'working time'. Parts repositionable for 80 minutes. Oil, chemical and impact resistant. High temperature resistance (-30C to 80C). Withstands rough handling. Do not use to repair or bond items that will contact food or drink.

Cox Midiflow Combi sealant gun, ideal for low to medium viscosity materials. Ergonomically designed for comfort and ideal for semi-professional use with a lightweight ABS barrel. Suits 310ml and 400ml Cartridges. Requires nozzle when used with 600ml sachets. Blue plunger is for use with sachetsMetal plunger is used with cartridges Includes 12 month manufacturers warranty.

The Everbuild Strip-Out Tool is a uniquely patented tool which works on any type of sealant and ideal for use before applying Forever White silicone sealant.The strip out-tool is incredibly simple in its design and shape, providing a quick way to strip all types of sealant out of any 90-degree angle joint.

The Everbuild Twinpack with Strip-Out Tool is a unique, patented, tool which works on any type of sealant, the ideal partner for use before applying Forever White silicone sealant.The Strip-Out Tool is incredibly simple, its design and shape provide a quick way to strip all types of sealant out of any 90 angle joint, for easy sealant removal.The pack also contains a Smooth-Out Tool, a unique tool, ideal for smoothing out all sealant (especially Forever White) after application.This Everbuild product creates a perfect seal every time, even better you will have no edge marks, and no mess. This tool is ideal for use with Everbuild Silicone Sealants.

This Everbuild Sealant Smooth Out Tool is a unique tool ideal for smoothing out all sealant after application, creating a perfect seal every time. The tool leaves no edge marks nor mess.

This Everbuild EVBSILEAT Silicone Eater is a revolutionary chemical that removes all types of silicone sealant by digesting and breaking up the sealant. Everbuild Silicone Eater is harmless to most surrounding surfaces and can be used to remove sealant from baths, kitchen worktops, basins, showers, doors and window frames etc.

1 x Everbuild Showerproof Bathroom Silicone White 280ml

1 x Everbuild Showerproof Bathroom Silicone Translucent 280ml

The Everbuild Superflow Sealant Gun C3 is a high quality, robust gun which can handle the toughest of conditions. It has a rotating barrel, smooth action trigger with high pull ratio, soft-grip handle and is non-drip. Specification: Size: 310ml.

The Everbuild EVBSGNPOWER is the ultimate heavy-duty sealant gun with an extra pull trigger, hook end, and swivel action barrel for both 310 and 400ml cartridges.This heavy-duty gun is ideal for all sealant applications.

The Everbuild SG9 Jumbo Sealant Gun has a swivel action and an extra heavy-duty push rod mechanism to cope with stiff acoustic sealants. For all 900ml cartridges. Specification: Size: 900ml.

Sturdy skeleton gun with a hexagonal rod, reinforced ring and hook end. Takes standard 310ml and 400ml cartridges.

Sturdy skeleton gun with a hexagonal rod and reinforced ring. Takes standard 310ml cartridges.

The Everbuild Pyro Mate Firesil is a neutral cure, elastic silicone sealant which conforms to the EN1366-4 standard for fire retardancy.The sealant has a fire rating of up to 4 hours in certain joint configurations, CE marked under both ETAG 026 Part 3 and EN15651-1:2012 type F-EXT-INT CC class F 25LM.Pyro Mate can be used for all building joints requiring a fire rating, it will also seal joints, voids and irregular holes in fire walls, partitions and other structures.The neutral cure adheres to most building surfaces, porous and non-porous, while remaining permanently flexible. The white silicone sealant has excellent weathering characteristics, both suitable for internal and external use.Use in joints up to 50mm wide and 25mm deep. Primer is required for most construction substrates.Specifications: Colour: White.Size: 295ml.

Everbuild Everflex Mirror Mate Sealant Adhesive is a one part, chemically curing solvent-free sealant and adhesive combining the best qualities of silicone and polyurethane sealants. It is specifically designed for adhering most common mirrors to all common substrates without attacking the backing. When cured, Everbuild Mirror Mate can be over painted with most water and gloss based paints and has sanitary quality with a combined highly resistant to mildew and mould growth formula. The product is a joy to work with as the fast curing time is ideal for the application, tack free in 10-minutes and fully cured in 24-48 hours with excellent chemical resistance. AREAS FOR USE:Bonding mirrors to most common substrates.Automotive gap filling and sealing.Sealing and bonding marble and granite where non-staining is essential. External and internal perimeter pointing around doors and windows, especially in mobile structures such as caravans and boats.Sealing vertical expansion joints.Jointing cladding panels.As a high quality nail replacement adhesive, even to damp surfaces.Bonding difficult materials such as specialised polymer systems, metals and fibreglass.Any application requiring high performance, durable sealing and bonding of joints.Applications where resistance to chemical spillage is required (garage forecourts etc.).

This Everbuild AC95 is a high strength, permanently flexible acoustic/intumescent sealant, and adhesive.Specifically formulated for sealing, bonding plasterboard, and other kraft lined insulation boards where a fire rated seal of up to 5-hours is required. It is a water based, solvent free formula which is easy-to-use, to clean up, and adheres to almost all building substrates.The Everbuild product is permanently flexible with high grab will adhere to most surfaces whilst being mould resistant, and non-flammable. When cured, it can be painted over, and is easy to clean up.The AC95 will form an acoustic and intumescent barrier by sealing gaps between plasterboard walls, floors, ceilings, and dry lining applications.As an adhesive, Everbuild AC95 bonds plasterboard to plasterboard, wood, metal studding, and direct to block work. Also ideal for sealing and bonding most other kraft lined insulation boards.This product has an acoustic rating to BS EN ISO 140/3, and is tested for air permeability to EN13141-1 ventilation for buildings. Specifications: Size : 900 ml.Colour: White.

Everbuild Clean Room Silicone is an advanced neutral curing hygienic sealant that combines Mould Shield, a powerful Anti-Bacterial compound with FDA Approved Food Compatibility. It prevents the formation of most common germs on its surface including E-Coli, MRSA, Salmonella, Listeria and Staphylococcus and stops Black Mould Growth. Clean Room Silicone offers outstanding adhesion to most substrates including plastics, ceramics and metal. It is virtually odourless in application with a slow skinning time, making it ideal for long joint runs in larger applications. Remains permanently flexible with a movement capability of 25%. Tested and approved to FDA, US Food and Drug Administration regulation No 21CFR177.2600 by IANESCO (France).Meets ISO 11600 F G 25HM.

Dowsil™ Firestop 400 is an intumescent acrylic sealant for internal applications. Developed to maintain the integrity of fire walls or partitions, it does not emit halogenated by-products under fire conditions. Resists mildew and mould growth. Tested to BS 476 Part 22: 1987 and BS 476 Part 7: 1987. A 2 hour fire rating can be achieved.

The Everbuild Foil Pack Applicator Gun is designed for use with foil packs of sealants, and adhesives. The enclosed aluminium barrel can also be used for standard cartridges. Size: 600ml.

Trend TRENDIWAX is a Lubricant Wax Stick packed in a convenient push up dispenser and it will extend saw blade life by keeping the blade cool at the cutting points. It is for use when sawing aluminium. Apply directly onto the teeth of a stationary blade and use at regular intervals.Trendiwax is a low melting point solid lubricant for direct application to metal cutting tools including saw blades and drills. It gives excellent lubrication when sawing or machining aluminium, including anodised extrusions with minimum subsequent cleaning up. Specification: Tube Size: 342g.

This Scan Absorbent Quick-Rip Roll is non-linting, bonded for strength and perforated for easy tearing. It absorbs coolant, oil, water, solvents and non-aggressive fluids. The roll is supplied in a box with a dispensing slot and carry handle for easy use. Size: 31cm x 31m.

These Scan Absorbent Pads absorb oil, fuel and solvents. They have been bonded for additional strength. Ideal for dealing with small leaks and spills. Specification Pad Size: 550 x 450mm

This Scan Spill Kit absorbs up to 18 litres of oil, fuel and solvents. Ideal for vehicles and workshops. Contains: 10 x High Performance Absorbent Pads 40 x 50cm2 x High Performance Absorbent Socks 8 x 120cm1 x Disposal Bag with Tie

These Scan General-Purpose Pads absorb coolant, oil, water, solvents and non-aggressive fluids. They are bonded for increased strength. Ideal for dealing with small leaks and spills. Specification Size: 550 x 450mm

This Scan General Purpose Spill Kit absorbs up to 18 litres of coolant, oil, water, solvents and non-aggressive fluids. Ideal for use in the plumbing trade, for boiler leaks, etc. Contains: 10 x High Performance Absorbent Pads 40 x 50cm2 x High Performance Absorbent Socks 8 x 120cm1 x Disposal Bag with Tie

These Scan Absorbent Pads absorb acid, solvents and strong chemicals. They have been bonded for additional strength. Ideal for dealing with small leaks and spills. Pad Size: 550 x 450mm

This Scan Spill Kit absorbs up to 18 litres of acid, solvents and strong chemicals. Ideal for laboratories and workshops. 10 x High Performance Absorbent Pads 40 x 50cm2 x High Performance Absorbent Socks 8 x 120cm1 x Disposal Bag with Tie

ROCOL MOULD RELEASE Spray is a high performance PTFE based release agent. Designed to give fast, efficient and clean release with faithful reproduction of the mould profile however complex the mould or minute the detail. Suitable for use on all plastic and rubber mould tools including injection, compression and blow mouldings. Enabling high speed production. MOULD RELEASE Spray offers excellent adhesion, is non-staining, will not transfer to product and can be safely used without fear of blemish or any adverse effect on subsequent finishing operations. Provides a dry matt finish, which is ideal for over painting or printing on, for a gloss finish please see PR Spray. Specification Temperature Range: up to270C

FLAWFINDER DEVELOPER Spray is an aerosol applied white powder. Designed to draw the penetrant out of a flaw, and enhance the definition, to facilitate detection when used in conjunction with FLAWFINDER DYE PENETRANT and FLAWFINDER CLEANER Sprays. Highly absorbent white film for rapid results. Suitable for pressure testing and leak detection

Lumatic SRT6S Straight Rigid Delivery Tube is 6in long with 1/8in BSP male thread connection at each end.

Slide-on connector with knuckle joint for use with both standard and industrial type hook-on grease nipples. 1/8in BSP Thread Connection.

This Flexible Tube has the following specification: Length: 230mm (9inThread: 1/8 BSPMax Pressure: 15000 psi Material: Rubber

This Flexible Tube has the following specification: Length: 510mm (20in)Thread: 1/8 BSPMax Pressure: 15000 psi Material: Rubber

This Flexible Tube has the following specification: Length: 300mm (12in)Thread: 1/8 BSPMax Pressure: 15000 psi Material: Rubber

Rotary fitting to allow rotation of grease gun connectors without tightening or damaging flexible hoses. 1/8in BSP Male/Female Thread Connection.

Thread 1/4in BSP.

Angle 90° .Thread 1/8in BSP.

Angle 45 Thread - 1/8in BSP.

Thread 1/4in BSP.

Thread 1/8in BSP.

Hook-on connector for use with both standard and industrial type hook-on grease nipples. 1/8in BSP Thread Connection.

Thread 3/8in BSF.

Thread 5/16in BSF.

Thread 1/4in BSF.

The Lumatic BSLGH Standard Side Lever Grease Gun, complete with air release valve/European pattern bulk filler nipple, 6 inch rigid tube and hydraulic connector. International cartridge loading, accepts a 400cc cartridge. Made in Germany.

This Faithfull Transparent Oil Can is manufactured from high strength ABS, allowing a clear view of the contents at a glance.The high-pressure trigger action pump is fitted with a flexible spout and a brass nozzle, ideal for lubricating round corners and into tight box sections for precise application of the lubricant. Suitable for use with all kinds of lubricating oil. Specifications: Capacity: 350ml.Nozzle length: 80mm.

Thread: 5/16in BSF

Thread: 1/8in BSP

The Faithfull 45 Angled Grease Nipple is case hardened for durability. It conforms to DIN 71412 and has an 1/8in BSP thread. Supplied in packs of 5.

Thread: 1/8in BSP

Thread: 1/4in BSP

Thread: 1/4in BSP

This Faithfull Standard Hydraulic Coupler is designed to suit most greasing applications. It is fitted with a spring-loaded ball check mechanism to prevent pressure loss and four fully hardened spring steel jaws for a long service life.The Faithfull Coupler is for use with hand operated grease guns, only with a working pressure of up to 3000psi -207bar. It fits Faithfull grease guns FAI GGHD and FAI GGMP and flexible hoses FAI GGHOSE12 and FAI GGHOSE18.Suitable for use with hand operated grease guns with a 1/8in BSPT thread and working pressure not exceeding 3000psi -207bar.

The Faithfull Heavy-Duty Knuckle Joint Connector is designed for use with both standard and industrial hook-on nipples with 1/8in BSP thread.

The Faithfull Heavy-Duty Hydraulic Coupler has case hardened steel jaws and a 1/8in BSP thread connection. This will suit most greasing operations.

The Faithfull Heavy-Duty Conical Connector is made from high carbon, rust-resistant steel. Its pointed end is used to deflect the ball in the grease nipple, thereby permitting the injection of grease. This connector is ideal for damaged nipples with 1/8in BSP connection and will suit most greasing applications.

LUMATIC GREASE GUN CONNECTOR Slide-on connector for use with both standard and industrial type hook-on grease nipples. 1/8in BSP Thread Connection.