The DEWALT DT70561T Impact Torsion Set contains a wide selection of impact rated bits. These CNC accurately designed bits with a torque zone that absorbs the highlights in the torque, allowing optimal bit flexibility for maximum life in more demanding applications. Selected by professional users for maximum fastness and accessibility, with no reduction in performance. The bit holder combines the 10-times-so-powerful MagLock system with ease of use, versatile products like an Aluminium Screw Lock case for use with 50mm screwdrivers, 85mm bit tip holder with removable cover for use with 25mm bits. Supplied in a convenient TOUGH CASE storage box. Contains: 5 x 25mm Phillips Bits: PH1, PH2(x3) and PH3.9 x 25mm Pozidriv Bits: PZ1, PZ2(x7) and PZ3.2 x 25mm TORX Bits: TX20 and TX25.1 x 25mm Slotted Bit: 4-6mm. 6 x 50mm Phillips Bits: PH1(x2) and PH2(x4).8 x 50mm Pozidriv Bits: PZ1(x2) and PZ2(x6).2 x 50mm TORX Bits: TX20 and TX25. 1 x Magnetic Bit Holder.

The DEWALT DT70547T Aluminium Magnetic Screwlock Sleeve has been precisely CNC machined with a torsion zone to absorb peaks in torque. This allows optimum bit flex for maximum life in impact/high torque applications. It has a specially designed bit tip which optimises the fit into the fastener and eliminates wobble and stripped screws. Preferred by professional users for excellent hold, reach, stability and accessibility in all screwdriving applications even the most awkward to reach. The aluminium screw lock sleeve is for use with 50mm torsion bits.

The DEWALT DT70545T contains bits that are specially-designed to have an increased life, the Optimized Torsion Zone allows the bit to flex rather than break, even when used in extreme applications. The contoured area of the tip flexes to absorb the torque of the impact driver. Contains:5 x 25mm Pozidriv Bits: PZ1, PZ2(x3) and PZ3.3 x 25mm Phillips Bits: PH1, PH2 and PH3.16 x 50mm Pozidriv Bits: PZ1(x3) and PZ2(x13).7 x 50mm Phillips Bits: PH1(x2) and PH2(x5).2 x 50mm TORX Bits: TX20 and TX25.1 x Magnetic Sleeve.

The DEWALT DT70512T Impact Torsion Screwdriver Bit Set contains a selection of high performance impact torsion bits that have been designed for use with impact drivers. Preferred by professional users for maximum hold, tight access and no run out. The CNC precisely machined bits have a torsion zone that absorbs peaks in torque allowing optimum bit flex for maximum life in tough Impact or High Torque industrial applications. The bit holder features a magnetic screw lock system that is 10x stronger than the average holder, with an aluminium screw lock sleeve for use with torsion bits 50mm and above. Plus an 85mm bit tip holder with removable sleeve for use with 25mm bits and a compact rapid load for use with bits 25mm and above. Both provide excellent hold, reach, stability and accessibility in all screwdriving applications, even the most awkward to reach. Supplied in a compact bit case to safely store screwdriver bits and long and short magnetic screw guides. Contains:3 x 25mm Phillips Bits: PH1, PH2 and PH3.5 x 25mm Pozidriv Bits: PZ1, PZ2(x3) and PZ3.1 x 25mm Slotted Bit: SL6.3 x 25mm TORX Bits: TX20, TX25 and TX30.1 x Compact Magnetic Drive Guide.1 x Long Magnetic Drive Guide.

The Faithfull set of 3 hex to square drive adaptors. It converts any 1/4in Hex Drive or Drill Chuck to accommodate 1/4, 3/8, or 1/2in Drive sockets. Contains:1/4, 3/8 and 1/2in Square Drive.

The Trend PH/JIG/BS Single Pocket Hole Jig is for fast and accurate joining of solid timber and plywood giving strong instant joints in single or multiple fixing positions. It can help to build cabinets, furniture and small joinery projects with ease. The hardened drilling sleeves provide accurate, consistent pockets. There is also a handy built-in drill depth gauge that can be reversed for new or repair work. Works with timber thicknesses from 12mm to 38mm. Portable and adaptable. Supplied with: 1 x Pack of Assorted Screws, 1 x 150mm Square Drive Bit and 1 x HSS Drill Bit with Collar.

This pack contains 4 spare location pins, which are suitable for the KWJ700 and KWJ900 worktop jigs. Made from ABS plastic for strength.

Tradesman ALL IN ONE work top jig for up to 900 mm worktops. Hard wearing solid laminate 12 mm thick jig that cuts both parts of the joint in 15-minutes including setting up and left hand and right hand corners, 400 mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100 mm radius corner, 40 mm radius corner, 35 mm kitchen door hole and 3/4 inch BSP hole for mixer taps. It covers fixed lengths for 400 mm, 500 mm, 550 mm, 600 mm, 616 mm, 650 mm, 700 mm and 900 mm wide worktops and can cuts up to 40 mm thick worktops with or without anti-drip postformed edge. Three open-ended bolt recesses (dog bone style) for 150 mm bolts. Engraved lines for short 65 mm bolts and worktop cross-cut. 10 mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Engraved markings for identification of pin holes. Specification:Length: 1185 mm. Width: 390 mm. Thickness: 12 mm. Weight: 7.7 Kg. End cut: 45 degrees. Corner radius: 40 mm. Corner radius: 100 mm. Corner radius: 400 mm. Corner mitre joint: 45 degrees.

Trend Kitchen Worktop Jig for worktops up to 650mm. Made from hard-wearing, CNC machined Compact Grade High-Pressure Laminate, 12mm thick. Cuts both parts of the joint in 15 minutes, including setting up. For cutting: left and right-hand corners, 400mm radius peninsular joint and 35mm kitchen door hole. With fixed lengths for 600mm, 616mm, 635mm and 650mm wide worktops. Cuts worktops up to 40mm thick, with or without anti-drip postformed edge. It can also be used to cut 2 open ended bolt recesses (dog bone style) for 150mm bolts. 10mm plastic pins with tapered shoulders for tight fit provides 3-point pin contact to ensure ease of setting up. The pins are made from ABS plastic for strength.

The Trend CR/DWS/F4/FC is a 4 inch double sided diamond stone with folding handle and monocrystalline diamonds for fast, clean, stock removal which gives excellent sharpening performance. It is double sided for coarse sharpening and fine honing: Coarse 360 grit (nom. 40 microns) and fine 600 grit (nom. 25 microns). The Coarse is ideal for carpentry as it rapidly fixes or restores a damaged edge or blunt tools, including chisels and plane irons. The Fine is ideal for cabinet making for a fine finish and refines the cutting edges of chisels, small knives, etc - achieves a razor edge in seconds. With plastic ABS folding handle, that folds to protects diamond surface and oval holes design to collect and hold metal residue. Ideal for saw blades, chisels, knives, domestic and garden tools. Recommended use with Trend lapping fluid to prevent clogging or rusting and assist in keeping tools clean.

This Faithfull 4 Piece Router Bit Set is for use with kitchen worktop jigs. Tungsten carbide bits suitable for all routers with 1/2in collet. Contains: 3 x 1/2in Shank Straight: 12.7mm x 60mm, 12.7mm x 50mm(x2).1 x 1/4in Shank Flush Trim: 12.7mm x 25.4mm.

The Faithfull 35 Piece Router Bit Set with 1/2in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank Diameter: 12.7mm (1/2in) Contains: 1 x Straight: 3.2 x 14mm.1 x Straight: 6.5 x 20mm.1 x Straight: 10 x 25mm.1 x Straight: 12.7 x 20mm.1 x Straight: 12.7 x 25mm.1 x Straight: 19 x 20mm.1 x Dovetail: 12.7 x 8mm.1 x Dovetail: 15.0 x 12mm.1 x Panel Pilot: 6.5 x 30mm.1 x Guided Flush Trimmer: 10 x 13mm.1 x Guided Flush Trimmer: 10 x 25mm.1 x Guided Flush Trimmer: 12.7 x 12mm.1 x Guided Flush Trimmer: 12.7 x 25mm.1 x Guided Flush Trimmer: 19.1 x 25mm.1 x Mortising Cutter: 12.7 x 13mm.1 x Core Box: R3.2mm, 7 x 6mm.1 x Core Box: R6.3mm, 12.7 x 8mm.1 x Core Box: R6.3mm, 12.7 x 20mm.1 x 90 V-Groove: 12.7 x 10mm.1 x 45 Guided Chamfer: 30 x 14mm.1 x Guided Cove: R6.35mm, 25 x 10mm.1 x Guided Cove: R9.5mm, 30 x 14mm.1 x Guided Rabbeting Cutter: 30 x 6.5mm.1 x Guided Rabbeting Cutter: 30 x 8mm.1 x Guided Rabbeting Cutter: 30 x 10mm.1 x Guided Classical Cove: R8mm, 30 x 15mm.1 x Guided Wave Edge: 30 x 18mm.1 x Guided Beading: R12.7mm, 37 x 20mm.1 x Guided Double Roman: 32 x 14mm.1 x Guided Double Roman: 36 x 19mm.1 x Guided Roman Ogee: 25 x 12mm.1 x Guided Roman Ogee: 36 x 16mm.1 x Guided Rounding: R6.5mm, 25 x 12mm.1 x Guided Rounding: R10mm, 32 x 16mm.1 x Guided Rounding: R12.7mm, 36 x 20mm.

The Faithfull 30 Piece Router Bit Set with 1/4in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 6.3mm (1/4in). Contains: 1 x Straight: 5.0 x 12mm.1 x Straight: 6.0 x 20mm.1 x Straight: 8.0 x 20mm.1 x Straight: 10.0 x 20mm.1 x Straight: 12.0 x 20mm.1 x Straight: 14.0 x 20mm.1 x Straight: 16.0 x 20mm.1 x Straight: 18.0 x 20mm.1 x Straight: 20.0 x 20mm.1 x Dovetail: 12.7 x 13mm.1 x 90 V-Groove: 9.5 x 9mm.1 x 90 V-Groove: 12.7 x 9mm.1 x Core Box: R3.2mm, 6.0 x 6mm.1 x Core Box: R6.3mm, 12.7 x 10mm.1 x Classical Panel: 12.7 x 9mm.1 x Guided Flush Trimmer: 12.7 x 13mm.1 x 25 Guided Chamfer: 16.0 x 9mm.1 x 45 Guided Chamfer: 32.0 x 13mm.1 x Roman Ogee: R4mm, 25.0 x 12mm.1 x Guided Rabbeting Cutter: 28.6 x 13mm.1 x Guided Cove: R6.3mm, 22.0 x 12mm.1 x Guided Cove: R9.5mm, 28.0 x 12mm.1 x Guided Round Over: R3.2mm, 15.0 x 7mm.1 x Guided Round Over: R6.3mm, 22.0 x 12mm.1 x Guided Round Over: R7.9mm, 25.0 x 14mm.1 x Guided Round Over: R9.5mm, 28.0 x 14mm.1 x Guided Beading: R3.2mm, 16.0 x 8mm.1 x Guided Beading: R6.5mm, 22.0 x 12mm.1 x Guided Beading: R7.9mm, 25.0 x 14mm.1 x Guided Beading: R9.5mm, 28.0 x 15mm.

The Faithfull 15 Piece Router Bit Set with 1/2in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 12.7mm (1/2in). Contains: 1 x Straight: 3.2 x 14mm.1 x Straight: 6.5 x 20mm.1 x Straight: 12.7 x 25mm.1 x Straight: 19.0 x 20mm.1 x Dovetail: 12.7 x 8mm.1 x Panel Pilot: 6.5 x 30mm.1 x Guided Flush Trimmer: 12.7 x 12mm.1 x Mortising Cutter: 12.7 x 13mm.1 x Core Box: R3.2mm, 7 x 6mm.1 x 90 V-Groove: 12.7 x 10mm.1 x 45 Guided Chamfer: 30 x 14mm.1 x Guided Cove: R9.5mm, 30 x14mm.1 x Guided Rabbeting Cutter: 30 x 10mm.1 x Guided Roman Ogee: 25 x 12mm.1 x Guided Rounding: R10mm, 32 x 16mm.

The Faithfull 12 Piece Router Bit Set with 1/4in shank. Tungsten Carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 6.3mm (1/4in). Contains: 1 x Dovetail: 12.7 x 13mm.1 x Straight: 6 x 20mm.1 x Straight: 12 x 20mm.1 x Straight: 16 x 20mm.1 x Flush Trim: 12.7 x 13mm.1 x Rounding Over: R7.9mm, 25 x 14mm.1 x Rounding Over: R9.5mm, 28 x 14mm.1 x Roman Ogee: R4mm, 25 x 12mm.1 x Core Box: R6.3mm, 12.7 x 10mm.1 x Cove: R6.3mm, 22 x 12mm.1 x 45 Chamfer: 32 x 13mm.1 x 90 V-Groove: 12.7 x 9mm.

S8

These Rohm 4MT Series precision machined and ground Morse Taper 6JT Arbors, for mechanism performance, are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, are used on lathes and pillar drills for mounting 3 jaw chucks.Made from high-quality tool steel. Specifications: Size/Type: 4MT/6JT.

These Rohm 4MT precision machined and ground Morse Taper 3JT Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 4MT/3JT.

These Rohm 3MT Series precision machined and ground Morse Taper 6JT Arbors are for mechanism performance, and are ideal for use with custom tool and work holder designs. For use adapting Jacobs taper mounted chucks to morse taper spindles, and used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 3MT/6JT.

These Rohm 3MT precision machined and ground Morse Taper 33T Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks.Made from high-quality tool steel. Specifications: Size: 3MT/33T.

These Rohm 2MT precision machined and ground Morse Taper 6JT Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 2MT/6JT.

These Rohm precision machined and ground Morse Taper Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 3MT/33JT.

These Rohm 2MT precision machined and ground Morse Taper 3JT Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks.Made from high-quality tool steel. Specifications: Size/Type: 2MT/3JT.

These Rohm 2MT precision machined and ground Morse Taper 2JT Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks.Made from high-quality tool steel. Specifications: Size/Type: 2MT/2JT.

These Rohm 2MT precision machined and ground Morse Taper 1JT Arbors, for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 2MT/1JT.

These Rohm 1MT Series precision machined and ground Morse Taper 1JT Arbors, are for mechanism performance, and are ideal for use with custom tool and work holder designs. For adapting Jacobs taper mounted chucks to morse taper spindles, used on lathes and pillar drills for mounting 3 jaw chucks. Made from high-quality tool steel. Specifications: Size/Type: 1MT/1JT.

Quick change angle attachment for drilling and screwdriving in the narrowest of spaces and up to forces of 100Nm. Ideal for drilling at right angles through joists for laying pipe work. Attachment rotates 360?. For use with BS/SB18 LTX Quick and BS/SB18 LTX Quick brushless models.

The DEWALT DWE74912 Scissor Leg Stand is for use with the DWE7491 table saw. It enables easy transportation, and then set up on the actual jobsite.Specification: Weight: 6.8kg. (15lbs).

The DEWALT Impact Torsion Screwdriving Set features CNC precisely machined bits with a torsion zone to absorb peaks in torque. The set allows optimum bit flex for maximum life in Impact/High Torque applications.The 15 piece set has a longer life, faster, more accurate screw driving thanks to a specially designed bit tip which optimises the fit into the fastener and eliminates wobble and stripped screws.Preferred by professional users for maximum hold, tight access, and no run out.Supplied in a Magnetic Tough Case. Contains:3 x 25mm Phillips Bits: PH1, PH2, PH3.4 x 25mm Pozidriv Bits: PZ1, PZ2(2), PZ3.2 x 25mm TORX Bits: T20, T25.2 x 50mm Phillips Bits: PH2, PH3.3 x Socket Drivers: 7mm, 8mm, 10mm.1 x Magnetic Bit Tip Holder.

The DEWALT DT71517T-QZ Right Angle Torsion Drill Attachment is durable and has a compact design that allows it to fit in tight spaces where work is difficult to perform and is perfect for driving screws and drilling holes at awkward angles. It is ideal for cordless drills and accepts standard 1/4in hex shank accessories. Torsion bits have a Flexible Torsion Zone that absorbs torque peaks and reduces breakage. Includes the following: 3 x 25mm Pozidriv Bits: PZ2.2 x 25mm Phillips Bits: PH2.4 x 25mm Torx Bits: T10, T15, T20 T25.

The DEWALT DE7400-XJ Rolling Table Saw Stand is fitted with large heavy-duty wheels designed to easily roll over steps, kerbs, and jobsite debris. The folding legs are fitted with quick release levers which retract under the stand in a few seconds for easy and quick transport.The stand is made from lightweight aluminium, which improves the portability.The heavy-duty kick stand allows it to balance upright for mobility and storage, and there is also a retractable soft grip handle that slides out, allowing the user to pull the saw behind him comfortably.The design allows portability when the table saw is attached to the stand, increasing productivity. Perfect for correct height and stability, for all applications, as well as ripping skirting, sheet material and roofing timbers on site.Supplied with universal brackets which attach to most table saws.

The DEWALT DE7260 Mitre Saw Folding Rolling Stand has an easily adjustable mounting system that simplifies tool attachment and ensures universal compatibility. It has 2 height settings and is fitted with wide supports that extend up to 2.4m, with a capacity up to 135kg, providing excellent material support. The stand is fitted with pneumatic assists for easy set up and collapse, XL rubber wheels for improved jobsite mobility and no punctures and a kickstand for vertical storage. This compact vertical storage option provides improved mobility and ease of transport. Specification: Max. Load: 135kgMax. Extension: 2.4m

DEWALT DE7033 Heavy-Duty Short Beam Leg Stand accommodates all DEWALT mitre saws. It has a lightweight aluminium construction that provides portability in and around the jobsite (only 14kg), the 1.1 metre beam extends to support up to 2.5 metres for use with large workpieces and the beam can support up to 227kg. Work stops can be converted into end stops for repetitive cutting to length. Integral folding legs avoid unnecessary assembly and the integrated carry handle provides ease of transportation. Applications include: cutting to length, roofing timbers, all material support requirements, and large workpiece support.Comes with: 2 x work stops / support and mitre saw brackets.

Senco DuraSpin Collated Screws for Fermacell board to wood applications. Phillips No.2 drive, black phosphate finish, coarse thread, small head with countersink nibs. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines. Size: 3.9 x 30mm.

1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 64mm

1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 57mm

1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 50mm

1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 45mm

1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 38mm

1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 32mm

1 x Box of 5000 DEWALT 16 Gauge Galvanised Finish Nails 25mm

Trend BSC/20/1000 Biscuits Size: No.20 (60 x 23 x 4mm).Pack Size: 1000.

Trend BSC/20/100 Biscuits Size: No.20 (60 x 23 x 4mm).Pack Size: 100.

Trend BSC/10/1000 Biscuits Size: No.10 (53 x 19 x 4mm).Pack Size: 1000.

Trend BSC/10/100 Biscuits Size: No.10 (53 x 19 x 4mm).Pack Size: 100.

Trend BSC/0/100 Biscuits Size: No.0 (47.5 x 15.5 x 4 mm).Pack Size: 100.

This Faithfull Contract Diamond Blade has the following specification: Size: 115mmBore Size: 22.2mmPack Quantity: 3

The Masterplug SCT04134W 240V cassette cable reel has a thermal cut out to stop cable overheating, a safety reset button, 4 sockets and 4 metres of 13 amp arctic cable. When you need a cable reel around the home, this compact cassette cable reel is perfect. This sturdy yet light portable extension lead has a four-metre cable, ideal for use in the home or garden. Manufactured to BS EN 61242.

The Masterplug PRO-XT Open Cable Reel is lightweight and sturdy. This portable cable reel has two shuttered sockets, two USB charging ports, LED indicator, integrated power switch and a safety thermal cut-out for protection against overloading when fully reeled. Designed and engineered for longevity, the plastic drum provides reliable protection when in use, transported or stored. This open cable reel is the professionals choice when it comes to using portable power. Specification: Fully Unwound: 3120W (13A), Fully Wound: 720W (3A)Switch: Double PoleCable Length: 25mCable Size: 1.25mm (H05VV-F)Standards: BS EN 61242. ASTA Approved

The Masterplug PRO-XT Case Cable Reel provides a compact, portable solution with an innovative design. Fixing points in the base allow the reel to be mounted for storage or while in use. The reel features 4 shuttered sockets, LED power indicator and the double pole switch allows you to control the power where you are working. This case reel is perfect for home, garden or workshop use and is ideal for DIY. For your additional safety, a thermal cut-out is integrated into the reel and cuts the power if the reel becomes warm due to overloading when reeled. Specification: Voltage: 240VFully Unwound: 3120W (13A), Fully Wound: 720W (3A)Switch: Double PoleCable Length: 15mCable Size: 1.25mm (H05VV-F)Standards: BS EN 61242. ASTA Approved

The Masterplug PRO-XT Cassette Cable Reel is lightweight and portable. It has four shuttered sockets, LED indicator, integrated power switch and a safety thermal cut-out for protection against overloading when fully reeled. The compact nature allows for easy transportation and storage. Specification: Voltage: 240VFully Unwound: 3120W (13A), Fully Wound: 720W (3A)Switch: Double PoleCable Length: 10mCable Diameter: 1.25mm (H05VV-F)Standards: BS EN 61242. ASTA Approved

1 x Masterplug Extension Lead 240V 6-Gang 13A White 2m

The Faithfull Power Plus TRANHEAT is a 110V vented portable transformer suitable for use with 110V electric heaters or other applications where a continuous load is to be applied. This model has 2 x 110V sockets, one is 16 amp and the other is 32 amp. Safety features include a resettable thermal overload protection function and a heavy-duty rubber cable fitted with BS approved 13 amp rubber plug. The vented steel case conforms to IP20 for water and dust ingress protection. Continuous rating: 3KVA.

The Faithfull TRAN5 is designed for use on the worksite, or anywhere where a 110V supply is required, to provide power to industrial powertools. This 110V transformer has 3 outlets 2 x 16 amp and 1 x 32 amp and has a heavy-duty GRP waterproof case which is rated to IP44, making it fully weatherproof and therefore suitable for use in most types of outdoor and worksite conditions. This Faithfull 5 kVA transformer has a great safety features include a re-settable thermal overload protection function and a rubber cable fitted with BS approved 13 amp rubber plug. Not suitable for use on 110V heaters where a continuous load is required.

The Faithfull Power Plus TRAN33A is a 16 amp 3.3kVA Twin Outlet transformer, ideal for site use. It has a heavy-duty GRP weatherproof case which is rated to IP44. It has a resettable thermal overload protection and is fitted with BS approved 13 amp plug. It also includes a unique blue LED Power On indicator, which provides the user with an at a glance confirmation that the unit is live. This model has 2 x 110V 16 amp sockets. NOT suitable for use on 110V heaters where a continuous load is required.

The Faithfull TRAN15 is designed for use on the worksite to provide power to industrial powertools.This single outlet 110V 16 amp transformer has a heavy-duty GRP weatherproof case which is rated to IP44, making it fully weatherproof and therefore suitable for use in most types of outdoor and worksite conditions. This Faithfull 1.5kVA transformer has great safety features that include a resettable thermal overload protection function and a heavy-duty rubber cable fitted with a BS approved 13 amp rubber plug. Not suitable for use on 110V heaters.

These Faithfull 110V sockets can be fitted to 110V extension cables for use with Faithfull transformers. The sockets are easy to fit and you can also purchase plugs from the Faithfull range that are compatible. Voltage: 110VAmp: 32AType: BSEN60309 Socket

The Faithfull Festoon Light Set, comes on a 22 metre arctic cable supplied with 10 x ES GLS rough service bulbs (110V), each bulb is protected by a lightweight yellow plastic cage. These festoon lights will provide a very effective solution to illuminating a large area on site by hanging the lights in one room and to another across a landing, etc. Instant light without the possibility of shadows that can be caused by using tripod lighting. Fitted with a 16 amp 110 volt plug. Replacement bulbs are available, FPPSLBA6010W.

The Faithfull LED Festoon Light Set, comes with a 22 metre arctic cable supplied with 10 x bulbs (110V), each bulb is protected by a lightweight yellow plastic cage. These festoon lights will provide a very effective solution to illuminating a large area on site by hanging the lights in one room and to another across a landing, etc. Instant light without the possibility of shadows that can be caused by using tripod lighting. Fitted with a 16 amp 110 volt plug. Replacement bulbs are available, FPPSLBA6010W.

The Faithfull Single Tripod Site Light offers excellent illumination to suit both commercial and domestic use. Each lamp is constructed from a die-cast body and is equipped with a metal grille to prevent accidental contact with the hot lens and to protect it against damage.Mounted on a sturdy telescopic stand that enables the lamp height to be adjusted between 780mm and 1830mm (31in and 72in). The spread of the tripod feet are independently adjustable to suit uneven terrain. Supplied with C class energy saving halogen tubes which offer a 20% saving on energy. All lamps are fitted with an approved BS plug. Conforms to IP54 for water and dust ingress protection.Faithfull Single Tripod Site Light 500 Watt 240 Volt Version.

Black plug, 240V, 13A. This plug features a sturdy nylon base and cover cap that is manufactured to BS 1363/A.

Designed to fit comfortably in the hand, this compact cassette reel not only ensures that the cable is fully protected while in storage or transit but also safe while in use, using a thermal overload protection system to prevent overheating damaging the cable. The cable reel feature four shuttered plug sockets, a BS-approved plug and a back grip handle with a rotating winding knob making it easy to wind and to use. Manufactured to Kitemark KM61209. Specifications: Length: 10mAmps: 10Sockets: 4Voltage: 240VMax. Load Fully Unwound: 2400W (10A)Max. Load Fully Wound: 720W (3A) Type: Cassette NOTE: All cable reels should be fully unwound before they are used to carry their recommended maximum load.

16A, 110Vcoupling socket for 14mm trailing leads. Voltage: 110VAmp: 16A Conforms to IP44 for water and dust ingress protection.Type: BS EN 60309 Socket.

Masterplug Extension Lead eliminates the problem of having more electrical items than sockets available. Great to use in the home as well as in the office. Manufactured to BS 1363-2 Standards. Specification: Number of Gangs: 4Cable Length: 5mFuse: 13 ampColour: WhiteVoltage: 240V

Waterproof electrical plug for use with site transformers and trailing leads. Voltage: 240VAmp: 16AType: BS EN 60309 Plug.

3 Piece BB70-3 Replacement Bandsaw Blade Set to suit the BS250 Bandsaw. Contains: 1 x 1/4in Blade 6 TPI.1 x 1/2in Blade 6 TPI.1 x 3/8in Blade 6 TPI.

The Faithfull Sabre Saw Set contains an assortment of 15 sabre saw blades in 5 popular types and allows the cutting of a wide variety of both wood and metal. These high quality blades are manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform.Contains the following:3 x FAISBS811H Blades: For coarse wood, free of nails, pruning green wood3 x FAISBS617K Blades: For coarse wood, free of nails, pruning green wood and for performing curved cuts/plunge cuts3 x FAISBS1531L Blades: For coarse fast cuts in wood and tree cutting and pruning3 x FAISBS1118BF Blades: For pallet repair, with nails/metal, sheet metal, pipes, aluminium profiles provide a flexible flush cut3 x FAISBS1411D Blades: For the fast cutting of coarse wood wooden panels, boards, plywood, plastic, pruning green wood.

Pack of 5 Faithfull S922HF Bi-Metal Sabre Saw Blades Demolition 150mm 10 TPI

The Faithfull S922BF Bi-Metal Sabre Saw Blades are ideal for thick sheet metal (3-8mm) and for solid pipes/profiles (10-100mm). Specification: Length: 150mm (6in)TPI: 14 TPI

The Faithfull S918H Sabre Saw Blades are ideal for medium to thick sheet metal (3-8mm) fine, closed pipes and profiles (10-100mm). Specification: Length: 150mm (6in)Teeth: 10 TPI

The Faithfull S918E Sabre Saw Blades are ideal for thin sheet metal (2-5mm) fine, closed pipes and profiles (5-100mm). Specification: Length: 150mm (6in)Teeth: 18 TPI

The Faithfull S811H Sabre Saw Blades are ideal for coarse wood, free of nails (5-100mm) and pruning green wood (up to 100mm). Specification: Length: 150mm (6in)Teeth: 10 TPI

The Faithfull S617K Sabre Saw Blades are ideal for coarse wood, free of nails (20-100mm) and pruning green wood (up to100mm). Especially for curved cuts/plunge cuts. Specification: Length: 150mm (6in)Teeth: 3 TPI

Pack of 5 Faithfull S611DF Bi-Metal Sabre Saw Blade Demolition 150mm 6 TPI

The Faithfull S229D Diamond Grit Sabre Saw Blade is designed for tough cutting situations. The tough braze bonded diamond edge and high-grade steel blade blank give an extremely long lifespan. The blade is extremely robust with minimal diamond loss or dulling. It features patented Reduced Kerf Technology (RKT) for fast cutting. It will easily cut through Cast Iron, Brick/Block (lightweight), Plasterboard, Cement Board, Fibreglass, Carbon Fibre, Composites, Ceramic, Porcelain, Granite and Stucco. Cut surfaces require little secondary finishing. Specification: Blade Thickness: 1mmBlade Width: 20mmBlade Length: 230mm

The Faithfull S1531L Sabre Saw Blades are ideal for coarse fast cuts in wood (tree cutting and pruning). Specification: Length: 240mmTeeth: 5 TPI

The Faithfull S1411DF Sabre Saw Blades are ideal for use on wood, chipboard, wood with nails/metal, window frames, and fibreglass/epoxy up to 100mm thick. Specification: Length: 300mmTPI: 6

The Faithfull S1411D Sabre Saw Blade is ideal for coarse wood (20-250mm), wooden panels (up to 150mm), boards, plywood, plastic, pruning green wood (up to 250mm) and is fast cutting. Specification: Length: 300mm (12in)Teeth: 6 TPI

Pack of 5 Faithfull S1120HF Bi-Metal Sabre Saw Blades Demolition 300mm 10 TPI

Pack of 5 Faithfull S1122HF Bi-Metal Sabre Saw Blades Demolition 200mm 10 TPI

The Faithfull S1118BF Saber Saw Blades are ideal for pallet repair, with nails/metal (5-150mm), sheet metal, pipes, aluminium profiles (3-12mm). They have a flexible flush cut. Specification: Length: 200mm (8in)Teeth: 10 TPI

Pack of 5 Faithfull S1111DF Bi-Metal Sabre Saw Blade Demolition 228mm 6 TPI

The DEWALT DT2441L 2X Life Reciprocating Saw Blade Set contains a mixture of blade types for a wide range of cutting jobs. Bi-Metal construction; combining an HCS body with HSS teeth. With optimised tooth geometry for fast effective cutting with increased cobalt content for longer cutting life. The ToughCoat heat resistant coating prevents heat build up to maximise blade life. The wood blades have a Plunge Point tip which pierces the wood and removes more material, for fast and accurate cutting in wood applications. The metal blades have an optimised tooth design with a 14/18 tpi variable tooth geometry reduces tooth breakage in hard metals for extreme durability even in the most demanding applications. Supplied in a hassle-free, re-usable storage case that quickly and easily adjusts to suit the blade lengths. Contains: 2 x DT2300L 2X Life Wood Nail Reciprocating Blades 152mm x 6 TPI2 x DT2307L 2X Life Wood Nail Reciprocating Blades 228mm x 6 TPI 2 x DT2315L 2X Life General Purpose Reciprocating Blades 100mm x 10 TPI2 x DT2301L 2X Life General Purpose Reciprocating Blades 152mm x 10 TPI2 x DT2308L 2X Life General Purpose Reciprocating Blades 228mm x 10 TPI 1 x DT2407L 2X Life Metal Reciprocating Blade 152mm x 14/18 TPI1 x DT2408L 2X Life Metal Reciprocating Blade 203mm x 14/18 TPI

The DEWALT DT2440L 2X Life Reciprocating Saw Blade Set contains a mixture of blade types for a wide range of cutting jobs. Bi-Metal construction; combining an HCS body with HSS teeth. With optimised tooth geometry for fast effective cutting with increased cobalt content for longer cutting life. The ToughCoat heat resistant coating prevents heat build up to maximise blade life. The wood blades have a Plunge Point tip which pierces the wood and removes more material, for fast and accurate cutting in wood applications. The metal blades have an optimised tooth design with a 14/18 tpi variable tooth geometry reduces tooth breakage in hard metals for extreme durability even in the most demanding applications. Supplied in a hassle-free, re-usable storage case that quickly and easily adjusts to suit the blade lengths. Contains: 1 x DT2300L 2X Life Wood Nail Reciprocating Blade 152mm x 6 TPI1 x DT2307L 2X Life Wood Nail Reciprocating Blade 228 x 6 TPI 1 x DT2315L 2X Life General Purpose Reciprocating Blade 100mm x 10 TPI1 x DT2301L 2X Life General Purpose Reciprocating Blade 152mm x 10 TPI1 x DT2308L 2X Life General Purpose Reciprocating Blade 228mm x 10 TPI 1 x DT2407L 2X Life Metal Reciprocating Blade 152mm x 14/18 TPI

The Faithfull T shank Jigsaw Blade Set is the ideal companion for any jigsaw, this 10 piece set contains 6 alternative types of blades for a wide variety of woodcutting applications. 2 x FAI T144D HCS Fast straight cutting2 x FAI T101D HCS Clean straight cutting2 x FAI T101B HCS Clean straight cutting2 x FAI T111C HCS Fast straight cutting1 x FAI T119BO HCS Curved cutting1 x FAI T101AO HCS Curved cutting anti-splinter N.B. FAIT101AO is not available as a single item.

The Flex Power Tools TW-PT 80 Lambswool Polishing Pad consists of 90% natural wool and 10% polyester. This combination provides for longer service life and greater volume. It removes sanding scratches 30% faster than using a sponge. Ideal for UV paints and the latest generation of scratch-resistant paints. The special PerfectTouch sandwich design and extra orange foam layer give the pad that slight degree of cushioning and much greater stiffness. This allows for a perfect surface contact even in problem areas and an optimal and exact guiding.

Flexipads 88005 125mm (5in) GRIP fastening starter kit for rotary sanders and drills (use adaptor) Comprises:Rotary backer M14 thread (36304)Adaptor M14 to 6mm (13300)Foam pad (FLE88015)Lambs wool bonnet (FLE40220)3 assorted abrasives (P60, 120, 180). Everything you need for sanding and polishing wood, metal, plastics and automotive/boat paintwork. Made in Great Britain.

Size: 180mm (7in).

Size: 150mm (6in).

Size: 125mm (5in).

10MM OD X 3/8" BSPT MALE STUD PUSHIN Kelm One Touch Plastic

Yale P113 Toggle Lock is a surface fixing lock that swings over a frame fixed striking plate and is suitable for timber casement windows. Giving extra security to your home, it is ideal for those obscure windows that are fitted in side alleyways etc. Finish: WhitePack Quantity: 2

Squire J3 Round Section Hard Boron Alloy Chain is part of the Stronghold range of Squire chains. These chains offer very high security. Ideal for locking perimeter gates, substations, heavy goods vehicles etc. These chains would be recommended where there is an increased health and safety risk to the public or employees. Any chain displaying the Sold Secure logo has to undergo extensive and prolonged attack tests. This range has achieved Silver, proving that they are worthy of the respected Stronghold name. CRIMESTOPPERS supported. Size: 900 x 8mm.

Squire G4 High Security Chain is part of the Stronghold range of Squire chains. These chains offer very high security. Ideal for locking perimeter gates, substations, heavy goods vehicles etc. These chains would be recommended where there is an increased health and safety risk to the public or employees. Any chain displaying the Sold Secure logo has to undergo extensive and prolonged attack tests. This range has achieved Gold, proving that they are worthy of the respected Stronghold name. CRIMESTOPPERS supported. Length: 1200mm.Diameter: 10mm.

Squire G3 Round Section Hard Boron Alloy Chain is part of the Stronghold range of Squire chains. These chains offer very high security. Ideal for locking perimeter gates, substations, heavy goods vehicles etc. These chains would be recommended where there is an increased health and safety risk to the public or employees. Any chain displaying the Sold Secure logo has to undergo extensive and prolonged attack tests. This range has achieved Silver, proving that they are worthy of the respected Stronghold name. CRIMESTOPPERS supported. Size: 900 x 10mm.

The Meridian Outdoor Up/Down Light is manufactured from high-quality stainless steel. Suitable for outdoor use, weather-resistant IP65 rating. Requires 2 x GU10 light bulbs (not supplied). Specification: Input Voltage: 220-240V - 50/60HzDimmable: NoBody Material: Stainless SteelIngress Protection: IP65Dimensions: 60 x 90mm

The Link2Home Smart Pan Tilt Outdoor Camera makes sure that your home/workplace is safe and secure by enabling you to check in on your device anytime from anywhere. Secure connection, the camera utilises 128-bit SSL encryption. The camera detects motion and sound, and instantly sends an activity alert to your device. It can be placed anywhere, over your front door, garage, driveway or other areas. Weatherproof, so it will always keep monitoring, come rain or shine. It plugs into the mains to ensure it never runs out of power, for security 24/7. Use the Link2Home Pro app (Free) to tilt your camera from -10 to 75 and pan through 355 by simply swiping your finger across the display screen or using the joystick control. There is a built-in microphone and speaker that lets you tune in to what's going on, and talk back via the Link2Home Pro app, so you can see whos around and respond. It also streams in full HD (1080p) to your chosen device. Additionally, you can get a 110 wide-angle view of the area, zoom in, and enhance, you will be able to see every detail. This is the same day or night thanks to Night Vision LED sensors which let you view the whole scene at night. The CMOS sensor also provides better image clarity compared to CCD Sensors. If your outdoor camera detects something irregular, you can receive an activity alert on your smartphone with a snapshot of what happened. You can also record video clips if needed. Compatible with Amazon Echo Show and Google Screen devices including Google Chromecast. Just ask your smart speaker to access your camera device by saying 'Alexa show me the driveway' or 'Hey Google show me the garage on the living room TV'. Quick and easy to set up. Simply plug in the power cable, download the Link2Home Pro app (Free) and set it up from your Android or iOS device. No hub required. The mount can be fixed to wood or masonry using the screws provided. **Cloud Service (subscription sold separately). With the cloud service, you can continuously record everything thats happening, 24/7, not just clips. So, you can scan through up to 30 days of video history to see what youve missed. System Requirements: Wi-Fi ConnectionMobile or tablet with iOS 8 or later, or Android 4.1 or laterLink2Home Pro Account (Free)

The Link2Home Outdoor Smart Camera makes sure that your home/workplace is safe and secure by enabling you to check in on your device anytime from anywhere. Secure connection, the camera utilises 128-bit SSL encryption. The camera detects motion and sound, and instantly sends an activity alert to your device. It can be placed anywhere, over your front door, garage, driveway or other areas. Weatherproof, so it will always keep monitoring, come rain or shine. It plugs into the mains to ensure it never runs out of power, for security 24/7. The lens can be moved manually through 355 to give you the best viewing angle. There is a built-in microphone and speaker that lets you tune in to what's going on, and talk back via the Link2Home Pro app, so you can see whos around and respond. It also streams in full HD (1080p) to your chosen device. Additionally, you can get a 100 wide-angle view of the area, zoom in, and enhance, you will be able to see every detail. This is the same day or night thanks to Night Vision LED sensors which let you view the whole scene at night. The CMOS sensor also provides better image clarity compared to CCD Sensors. If your outdoor camera detects something irregular, you can receive an activity alert on your smartphone with a snapshot of what happened. You can record video clips of activity using the inbuilt MicroSD card slot (memory card*) or cloud service**. Compatible with Amazon Echo Show and Google Screen devices including Google Chromecast. Just ask your smart speaker to access your camera device by saying 'Alexa show me the driveway' or 'Hey Google show me the garage on the living room TV'. Quick and easy to set up. Simply plug in the power cable, download the Link2Home Pro app (Free) and set it up from your Android or iOS device. No hub required. The mount can be fixed to wood or masonry using the screws provided. Memory: *MicroSD Card (sold separately): 16GB - up to 3 days, 32GB - up to 5 days, 64GB - up to 10 days, 128GB - up to 21 days.**Cloud Service (subscription sold separately). With the cloud service, you can continuously record everything thats happening, 24/7, not just clips. So, you can scan through up to 30 days of video history to see what youve missed. System Requirements: Wi-Fi ConnectionMobile or tablet with iOS 8 or later, or Android 4.1 or laterLink2Home Pro Account (Free)

The Link2Home Outdoor Smart Floodlight Camera features motion and sound detection with 2-way audio, full HD video recording and a loud 125dB siren alarm for complete security. With a secure connection, the camera utilises 128-bit SSL encryption. The floodlight camera detects motion and sound, and instantly sends an activity alert to your device. Fitted with 2 x 12.5W light panels providing 2000 lumens of light. Equivalent to a traditional 125W floodlight, more than enough power to light up your surroundings, driveway, garden or office car park. It can be placed anywhere, over your front door, garage, driveway or other areas. Weatherproof, so it will always keep monitoring, come rain or shine. It plugs into the mains to ensure it never runs out of power, for security 24/7. It can be moved manually on its bracket through 120 to give you the best viewing angle. Through the app screen, you can draw your detection area so that you only focus on the areas that matter and eliminate false alerts from things like trees and shrubs. There is a built-in microphone and speaker that lets you tune in to what's going on, and talk back via the Link2Home Pro app, so you can see whos around and respond. You can also activate a 125dB siren alarm from the app screen or let the alarm be triggered by another device. It also streams in full HD (1080p) to your chosen device. Additionally, you can get a 140 wide-angle view of the area, zoom in, and enhance, you will be able to see every detail. This is the same day or night thanks to Night Vision LED sensors which let you view the whole scene at night. The CMOS sensor also provides better image clarity compared to CCD Sensors. If your floodlight camera detects something irregular, you can receive an activity alert on your smartphone with a snapshot of what happened. You can record video clips of activity using the inbuilt MicroSD card slot (memory card*) or cloud service**. Compatible with Amazon Echo Show and Google Screen devices including Google Chromecast. Just ask your smart speaker to access your camera device by saying 'Alexa show me the driveway' or 'Hey Google show me the office car park on the living room TV'. The floodlight camera can be easily set up outside your home. Simply wire up using an existing power source or install a new one (if in doubt consult a qualified electrician). Download the Link2Home Pro app (Free) and set it up from your Android or iOS device. No hub required. Memory: *MicroSD Card (sold separately): 16GB - up to 3 days, 32GB - up to 5 days, 64GB - up to 10 days, 128GB - up to 21 days.**Cloud Service (subscription sold separately). With the cloud service, you can continuously record everything thats happening, 24/7, not just clips. So, you can scan through up to 30 days of video history to see what youve missed. System Requirements: Wi-Fi ConnectionMobile or tablet with iOS 8 or later, or Android 4.1 or laterLink2Home Pro Account (Free)

The Link2Home Smart Square Pan Tilt Indoor Camera makes sure that your home/workplace is safe and secure by enabling you to check in on your device anytime from anywhere. Secure connection, the camera utilises 128-bit SSL encryption. Use the Link2Home Pro app (Free) to tilt your camera from -75 to 75 and pan through 355 by simply swiping your finger across the display screen or using the joystick control. There is a built-in microphone and speaker that lets you tune in to what's going on, and talk back via the Link2Home Pro app, so you can see whos around and respond. It also streams in full HD (1080p) to your chosen device. Additionally, you can get a 100 wide-angle view of the area, zoom in, and enhance, you will be able to see every detail. This is the same day or night thanks to Night Vision LED sensors which let you view the whole scene at night. The CMOS sensor also provides better image clarity compared to CCD Sensors. The pan and tilt camera detects motion and sound, and instantly sends an activity alert to your device. If your pan and tilt camera detects something irregular, you can receive an activity alert on your smartphone with a snapshot of what happened. You can record video clips of activity using the inbuilt MicroSD card slot (memory card*) or cloud service**. Compatible with Amazon Echo Show and Google Screen devices including Google Chromecast. Just ask your smart speaker to access your camera device by saying 'Alexa show me the babys room' or 'Hey Google show me the nursery on the living room TV'. Quick and easy to set up. Simply plug in the USB power cable, download the Link2Home Pro app (Free) and set it up from your Android or iOS device. No hub required. You can also use the installation bracket to install your camera to a ceiling or supportive surface. Memory: *MicroSD Card (sold separately): 16GB - up to 3 days, 32GB - up to 5 days, 64GB - up to 10 days, 128GB - up to 21 days. **Cloud Service (subscription sold separately). With the cloud service, you can continuously record everything thats happening, 24/7, not just clips. So, you can scan through up to 30 days of video history to see what youve missed. System Requirements: Wi-Fi ConnectionMobile or tablet with iOS 8 or later, or Android 4.1 or laterLink2Home Pro Account (Free)