The BOA Baby Boa Strap Wrench is used for many plumbing jobs, on cars and irregular shapes and provides over 2,000lb of pressure without marking the workpiece. Both strength and flexibility are provided by the braided rubber strap, which fits into a slot in the handle of the tool and provides a perfect fit on the workpiece. Capacity: 100mm (4in).

The Boa Aluminium Strap Wrench is the original and best strap wrench. Useful for many jobs including plumbing, automotive, A/C installation/maintenance, pool, pond and oil filters. Both strength and flexibility are provided by the braided rubber strap, which fits into a slot in the handle of the tool and provides a perfect fit on the work piece. Provides over 2,000lb of pressure without marking the work piece with a pro use capacity of up to 305mm. Capacity: 10 (3/8in) to 275mm (11in).

The Bahco Adjustable Wrenches have been developed according to the scientific ERGO™ process and are made from high-performance alloy steel with a comfortable non-slip thermoplastic grip handle. The jaw does not fall out even at the maximum opening of the wrench and they are scaled in mm for pre-adjusting and accurate measurement. The head has a 16 angle that provides better accessibility and has a left-handed screw with a reversible jaw for pipe use. The head is chrome plated, precision hardened and anti-corrosion treated. Conforms to the following standards: ISO 6787, DIN 3117, ASME B107.8M - 1996 and BS 6333. Set of 3: 1 x 9070P: Length: 158mm, Capacity: 20mm. 1 x 9071P: Length: 208mm, Capacity: 27mm. 1 x 9072P: Length: 257mm, Capacity: 31mm.

The Stanley 151R is a professional spokeshave which is fully adjustable for depth of cut with twin thumbscrews. Machined from fine grey iron with round bottom. Precision machined bases are suitable for work on any concave surface. Specification Type: Round.Cutter Width: 55mm (2.1/8in).Length: 250mm (10in).

The Stanley 151 is a professional spokeshave which is fully adjustable for depth of cut with twin thumbscrews. Machined from fine grey iron with a flat bottom. Precision machined bases are suitable for work on any convex surface. Type: Flat.Cutter Width: 55mm (2.1/8in).Length: 250mm (10in).

A manually adjustable general-purpose Block plane. Ideal for model makers, craft applications and light-duty jobs. Cutter Width: 35 mm (1.3/8in).Length: 140 mm (5.1/2in).

The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen. This Set of 6 Marples M444 Series Blue Chip Bevel Edge Chisels includes the following: Sizes: 6, 10, 13, 19, 25 32mm (1/4, 3/8, 1/2, 3/4, 1 1.1/4in). Supplied in a wood presentation box.

The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen. This set of 5 Marples M444 Series Blue Chip Bevel Edge Chisels contains sizes:6, 10, 12, 18 25mm (1/4, 3/8, 1/2, 3/4 1in).

The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen. This set of 4 Marples M444 Series Blue Chip Bevel Edge Chisels contains sizes:6, 12, 18 25mm (1/4, 1/2, 3/4 1in).

The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen. This set of 3 Marples M444 Series Blue Chip Bevel Edge Chisels contains sizes:12, 18 25mm (1/2, 3/4 1in).

The Hultafors Set of 4 HDC Heavy-Duty Chisels, that have a perfect ground blade, bevelled at 25 for the best ratio possible between sharpness and durability. It is forged in one piece with an I-beam going all the way through for extreme durability and to maximise the force transmission down to the work piece. The entire chisel including the handle can be positioned flat against the surface for an increased number of applications. The chisel is fitted with a santoprene handle, optimised for both power and precision. Chisels with perfect precision, sharp, heavy duty, and always close at hand. They are ready for tasks requiring extreme strength and precision. They come with a smart holster made from durable PP plastic for increased accessibility, the holster can easily be attached to a belt or on a button. Comes with one of each size: 20, 25, 32, 40mm Each chisel is supplied in a ventilated ABS holster to protect the user and cutting edge during transportatoin.

Hultafors 5 Piece Scandinavian Butt Chisel Set is ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic Deposition (EPD). They are an everyday chisel, sharp, reliable and always at hand. Comes with one of each size: 32mm, 25mm, 18mm, 12mm and 6mm. Each chisel is supplied in a ventilated ABS holster to protect the user and cutting edge during transportation.

The Faithfull FAIWCBS3BC set of three blister carded bevel edge chisels have the following dimensions: Sizes: 13, 19, and 25mm (1/2, 3/4 and 1in) Blade Length: 140mm

The Faithfull No.80 cabinet scraper removes fine shavings from wood to give a very smooth finish. Very useful for smoothing knots, burrs, crossed grain and removing old surface finishes on large areas. Unlike an abrasive it does not produce dust which can clog the grain.The 70mm wide, 1.8mm thick blade is held in a fine grey iron cast body with a machined base. The wing handles allow for comfortable use over long periods. The cut can be changed from coarse to fine by turning the thumbscrew which forces the blade to bend slightly and protrude through the scrapers base.The blade can be easily resharpened with a sharpening stone and a burr turned with a burnishing tool.Replacement blade code: FAISCRAPERRB

The Faithfull No.6 Fore plane performs a dual role between stock removal and truing up long edges or levelling wide boards. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 60mm (2.3/8in).Overall Length: 457mm (18in).

This Faithfull No.5 Bench or 'Jack' Plane has a long base and is used for the initial preparation of rough timber.Made with a quality grey cast iron body for strength and stability with precision ground base, and sides for flatness and squareness. The machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools.Presented in a fine hinged wooden storage case.The blade will require honing before use.Specifications: Blade width: 50mm (2in).Overall length: 355mm (14in).

This Faithfull Plane Set is supplied in 2 zip-up canvas carry bags, designed to protect the planes against damage during transport or when in storage. Provides the essentials you need for planing wood: 1 x No.4 Smoothing Plane, designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 50mm.Overall Length: 250mm. 1 x No.60 1/2 Block Plane has the plane iron set at 13.5. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single-handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain. Cutter Width: 35mm.Overall Length: 160mm.

This Faithfull Plane Set comes in a wooden storage box and provides the essentials you need for planing wood: 1 x No.4 Smoothing Plane, designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 50mm.Overall Length: 250mm. 1 x No.60 1/2 Block Plane with plane iron set at 13.5. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single-handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain. Cutter Width: 35mm.Overall Length: 160mm.

The Faithfull No.3 Finishing Plane is ideal for final finishing of cabinet work and general joinery, precision machined for accurate adjustment. Suitable for both hard and soft woods. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 45mm.Overall Length: 230mm.

The Faithfull Hand Rasp Shaver Tool is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. The lightweight and strong ABS plastic body features a small head to allow fast stock removal in confined spaces. The durable metal rasp blade clicks into place, making its replacement tool-free and fast. Specification: Blade Size: 60 x 40mmOverall Length: 185mm

The Faithfull Hand Rasp Round File is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. This cylindrical rasp features an ABS plastic handle plus a thumb grip at the tip for extra control and is ideal for hole enlargement or contour shaving. Specification: Blade Size: 255 x 17mmOverall Length: 400mm

The Faithfull Hand Rasp Plane is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. The lightweight and strong ABS plastic body is shaped like a plane to allow single or dual handed operation for fast stock removal. The durable metal rasp blade clicks into place, making its replacement tool-free and fast. Specification: Blade Size: 255 x 40mmOverall Length: 270mm

The Faithfull Hand Rasp File is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. The lightweight and strong ABS plastic body design allows this rasp to be used with a single or dual handed operation for fast stock removal. The durable metal rasp blade clicks into place, making its replacement tool-free and fast. Specification: Blade Size: 140 x 40mmOverall Length: 310mm

The Faithfull Hand Rasp Block Plane is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. The lightweight and strong ABS plastic body is shaped like a block plane for easy single handed operation. The durable metal rasp blade clicks into place, making its replacement tool-free and fast. Specification: Blade Size: 140 x 40mm Overall Length: 155mm

A small portable vice with a swivel base and an integral clamp that allows it to be attached to workbenches or table tops. Ideal for clamping smaller woodworking pieces and many other objects, the swivel base also allows the work piece to be rotated through 360. The vice has a 75mm (3in) width jaw with a clamping capacity of up to 55mm (2in). Manufactured from high quality grey iron castings that are machined to close tolerances to ensure a smoothly operating sliding jaw. The main screw features an Acme thread that provides a smooth quick closing jaw action, both the main screw and handle are chrome plated to provide better corrosion resistance, the vice is finished with an attractive Blue enamelled coating.Ideal for use by DIY enthusiasts or model makers.Jaw width: 75mm (3in)Clamping capacity: 55mm (2in)Throat depth: 30mm (1in)Tommy bar length: 100mm (4in)Clamp capacity: 45mmWeight: 2.93Kg (6½lbs)

The Faithfull VW150B Workbench Vice has the following specification: Jaw Width: 175mm (7in)Clamping Capacity: 185mm (7.1/4in)Throat Depth: 65mm (2.1/2in)Tommy Bar Length: 150mm (6in)Weight: 3.157Kg (7lbs)

The Faithfull VW150B Workbench Vice has the following specification: Jaw Width: 150mm (6in)Clamping Capacity: 145mm (5.3/4in)Throat Depth: 60mm (2in)Tommy Bar Length: 125mm (5in)Weight: 2.27Kg (5lbs)

The Faithfull FAIVMULTI360 is a truly versatile multi vice, which is ideal for use by both mechanics and engineers. The body and sliding jaw are constructed from fine grey cast iron and are machined to provide a smooth and reliable clamping action. The jaws, handle and main screw assembly are made from hardened steel. This strong durable vice offers many features including a four point bench mounting 360 swivel base and an ingenious rotating jaw head that allows the selection of either a standard parallel serrated jaw, or pipe jaws with an integral V-jaw assembly depending on the work in hand. The jaw head can be pivoted 180 either side of vertical and locked in position, meaning it is able to provide the perfect working angle for any application. To avoid over-loading, the vice is fitted with a fused steel main handle. Standard Jaw Capacities: Width: 140mm.Opening: 130mm.Throat depth: 75mm.Pipe clamping Jaw capacities: Jaw opening: 130mm.Maximum pipe diameter: 70mm. Tommy bar length: 230mmAnvil size: 80 x 65mm. Weight: 18kg (40lbs)Dimensions: L450 x W200 x H240mm All measurements are approximate.

This Vitrex 10 2908 Margin Trowel has a hardened and tempered steel base, ground and polished for lasting durability. The trowel has a comfortable handle with soft grip for prolonged use and a long shank with 6 rivets.It is designed for use by the professional installer and is ideal for patch jobs, and for working in difficult and awkward spaces. Specification: Blade Size: 2in.

This RST Groover trowel creates an expansion groove in concrete slabs to help control cracking. It has a double hang soft touch handle which allows weight to be distributed more evenly. Size: 150 x 75mm (6 x 3in).

The RST124BST Finishing Trowel is fitted with a banana-shaped soft touch handle for user comfort.

This trowel has a projecting groove along its base which is upturned at one end for dividing fresh concrete slabs into equal parts to control cracking.Wood handle.Double hang.Carbon steel blade.Blade Size 150 x 75mm (6 x 3 in) , with a 12mm (1/2 in) radius edge.

Blade width: 1/2in (13mm).Blade length: 6in (150mm).

Size: 130 x 50mm (5.1/2 x 2in).

The Ragni R319-4 Tiler's Trowel is fitted with a carbon steel blade that provides quality finishes and ensures trowel longevity. The U-shaped serrated edges are suitable for thin bed fixing mosaic and wall tiles up to 100mm x 100m. Its ABS plastic handle provides increased comfort for all day use. The blade-to-rivet bonding system is guaranteed for life. Comes with a 1 year guarantee. Type: Serrated Edge 4mm (U-Type)Blade Size: 280 x 120mm (11 x 4.3/4in)

This Marshalltown M180D Groover is made of stainless steel with a sturdy steel mounting, and a DuraSoft handle for added comfort.It has a, properly, shaped bit and leading edge to cut a sharp groove, and will create ½ inch wide by ½ inch deep grooves in concrete slabs to help control stress cracking. Size: 76mm x 152mm (3 x 6 in).

This Stanley FatMax Triple Pack contains the following: 1 x FatMax BladeArmor Tape has a Mylar coated steel blade and an impressive stand-out of 3.35m. The Mylar coated blade is up to 10 times more resistant to abrasion than normal lacquered blades. Its high-impact ABS plastic case has an oversized rubberised bumper, to prolong the life of the hook. With rubber overmould to deliver additional comfort and control, whilst also increasing durability and impact resistance. The 3-rivet, corrosion-resistant, Tru-zero hook allows for accurate inside and outside measurements. This particular hook also features top, bottom and side hooks for easy above, below or side measurements. The forward blade lock design makes it easier to lock and unlock the blade. Length: 5m/16ftTape Width: 32mmAccuracy: EC Class II 1 x FatMax Retractable Knife has an instant blade change mechanism. There is also a blade clamp for heavy-duty applications and a push-button blade door release for quick and easy blade change. An auto rise blade storage holder presents a single blade for changing and there is a blade wiper to remove debris from the blade. The thumb pad and ergonomic cutting angle make it comfortable to use and ideal for flooring applications. Supplied with 5 x FatMax Utility Blades. 1 x FatMax Utility Blades, Pack of 10.

The Stanley Tools FatMax Classic Tape has a Mylar coated steel blade, with both metric and imperial graduations, and an impressive stand-out of 3.35m. The Mylar coated blade is up to 10x more resistant to abrasion than normal lacquered blades. There is also BladeArmour coating on the first 50mm, this reduces the risk of breaking the blade by 95%. The 32mm wide blade makes reading the numbers easy. Its high-impact ABS plastic case is fitted with a cushion grip, providing a sturdy, slip-resistant hold. Specially designed hook grabs on the side, bottom or top for added versatility. Blade Length: 8m/26ftBlade Width: 32mmAccuracy: EC Class II

The Stanley Key Ring Tape has a Mylar coated steel blade with metric graduations and an impressive stand out of 90cm. It has a high-impact ABS plastic case with a soft-grip, rubberised outer casing to help it withstand the usual knocks and bumps. The 2-rivet, corrosion resistant, tru-zero hook allows for accurate inside and outside measurements. The blade is kept firmly in place via a strong, smooth action locking mechanism.

The Stanley Closed Case Steel Long Tape has a 10mm wide yellow steel blade with polymer coating for durability and easy to read markings in both metric and imperial graduations. The closed high visibility yellow ABS case protects the blade and internal workings due to its hard-wearing, high impact properties. Other features include a folding crank, easy wind drum and a hook with spurs for ease of use. Blade Length: 30m/100ftBlade Width: 10mmAccuracy: EC Class II

The Stanley PowerLock Top Reader Tape has a clear viewing window on the top of the case. Ideal for those taking internal measurements on a regular basis as the length of the case is taken into account by the measurement you see within the viewing window. Its Mylar coated steel blade with metric graduations. That is up to 10 times more resistant to abrasion than normal lacquered blades. Tipped by a super-strong 3 rivet, automatically adjustable tru-zero end hook. Supplied in a high-impact, chrome plated ABS plastic case with a smooth, quick-grab auto-locking mechanism and a conventional steel belt clip.

The Komelon PowerBlade™ II Pocket Key Ring Tape is small enough to fit in your pocket or purse, but big enough to handle your measuring needs. It has a durable ABS plastic case, a sturdy nylon coated steel blade with metric graduations and secure slide lock. Fitted with a quick-release clasp, for attaching to your keys or belt loop. Specification: Blade Length: 2mBlade Width: 13mmAccuracy: Class II

The Hultafors ST30/15 Satellite Tape has a 10mm Matt Coat polyester coated steel blade that has graduations in both metric and imperial. Fitted with a unique triple action end-loop and fold-in claw that enables the tape to be anchored into or over a wide variety of objects and surfaces. With a closed case design that protects the blade and internal workings with a hard-wearing, high-impact ABS case, ultrasonically welded for added strength, that fits comfortably into the palm of your hand. Rewinding is made easy and comfortable with the sturdy winding handle and rotating winding knob, which can then be stored neatly back into the centre of the tape. There is also an ABS belt clip moulded on to the rear of the case. Made in Britain. Specification: Length: 30m/100ftBlade Width: 10mmAccuracy: EC Class II

The Hultafors Brick-Mate Tape provides an innovative way to set out dry bonds and accurately calculate brick and breeze block quantities. The blade is marked with 4 scales: 1 Bricks, 2 Blocks, 3 Courses and 4 Conventional metric. The bright, ergonomic ABS case has a non-slip rubber grip pad and easy-to-operate positive action lock, minimising blade slip. With a bump stop for added blade and end-hook protection, and a unique snap-in quick-release belt clip holster. Made in Britain. Accuracy: EC Class IThis Hultafors BM8M Brick-Mate Pocket Tape has metric measurements only.SpecifiationBlade Length: 8mBlade Width: 25mm

This Fisco XFY Yellow ABS Nylon Rule is a general purpose four-fold rule for home, workshop, and trade use, it is made from hard-wearing ABS plastic.The brass hinged pins and end pieces extend the square's life and it has precisely inscribed and permanent graduations.Specifications: Length: 1m (3ft).Width: 32mm.

The Faithfull Fully Enclosed Fibreglass 30m / 100ft Long Tape features a 15mm wide blade clearly marked in both metric and imperial measurements. The fibreglass blade is resistant to stretching, impervious to moisture and resistant to scuffs and fitted with an ABS end loop. The large clear measurement increments are easy to read in most conditions and the tape is also easy to wipe clean after use. The tape is stored in a tough closed ABS, soft grip case, with a fold flat rewind handle and rotating winding knob with 3:1 gearing that allows the tape to be quickly rewound after use. Accuracy: EC Class III.

Colour: White

Colour: Yellow

The Advent 2-In-1 Gap Tape is a unique product for normal and internal measurements. It has a double sided, non reflective steel blade with metric and imperial graduations. Contained with an ergonomically designed ABS case with a moulded rubber grip for increased comfort. With normal measurements on the top of the blade, the reserve blade markings take into account the tape case dimensions, so when you measure internal spaces you simply butt the case up to the end and read the measurement.

The Faithfull Diamond Whetstone Kit contains 3 stones for quick, easy and effortless sharpening of any blade. The 70 x 200mm metal stones are electroplated with monocrystalline diamond in three grits, 400G Coarse, 600G Medium and 1000G Fine. The ABS plastic base has non-slip pads for use on most surfaces, and each stone can be removed to be used separately. The benefit of these stones over a traditional abrasive sharpening stone is that the sharpening surface remains absolutely flat and will not groove over time. This is essential in order to provide consistent straight edges on precision cutting tools such as wood chisels and plane irons. Diamond stones will sharpen carbon steel, HSS and tungsten carbide tools and may also be used to abrade glass, ceramic tiles and porcelain. Ideal for general purpose sharpening of knives, scissors, chisels, plane blades, cutting blades, TCT router bits and any tool that requires a sharp edge. Can be used dry or with water as a lubricant, no oils are necessary. Blade Size: 70 x 200mmOverall Size: 232 x 225 x 40mm

The Faithfull Diamond Sharpening Stone Kit is ideal for quick, easy and effortless sharpening of any blade and many other tools. The double sided 8mm thick metal stone is electroplated with monocrystalline diamond in two grits, 400G Coarse 1000G Fine, each can be easily accessed by simply releasing the stone from the docking station and turning it over.The benefit of this stone over a traditional abrasive sharpening stone is that the sharpening surface remains absolutely flat and will not groove over time. This is essential in order to provide consistent straight edged on precision cutting tools such as wood chisels and plane irons.Diamond stones will sharpen carbon steel, HSS and tungsten carbide tools and may also be used to abrade glass, ceramic tiles and porcelain and may be used dry or with water as a lubricant. Used for general purpose sharpening of knives, scissors, chisels, plane blades, cutting blades, TCT router bits and any tool that requires a sharp edge.The docking station is constructed using three solid, non-slip rubber pads and robust steel rods that are fitted with easy grip screw nuts for precise and firm fixing of the stone. The docking station is adjustable to accept stones from 135 to 216mm in length and has a 6mm deep recess to provide a secure and firm base for all sharpening operations.Supplied with a handy storage wallet.

The Stanley 0-54-925 Ratchet Screwdriver Set is ideal for all trades or DIY job applications, as it is well equipped with all the most common sockets and screwdriver bits for small jobs. Ideal for mechanics, model making, general garden/appliance repairs and lots lots more. Contents: 1 x Stanley Ratchet Screwdriver. 6 x Metric 1/4in Drive 6 Point Socket: 5mm, 6mm, 7mm, 8mm, 9mm, 10mm. 6 x Imperial 1/4in Drive 6 Point Socket: 1/4in, 5/16in, 11/32in, 3/8in, 7/16in, 1/2in. 5 x 25mm Phillips Bits: PH1(2), PH2(2), PH3. 3 x 25mm Parellel Bits: 6mm(2), 7mm. 5 x 25mm Torx Bits: TX10, TX15, TX20, TX25, TX27. 2 x 25mm Hex Bits: 3mm, 4mm. 1 x 1/4in Adaptor.

The Faithfull Interchangeable VDE Screwdriver Set offers a neat solution to the problem of both limited space and portability. Many electricians and service engineers are reluctant to take bulky toolboxes around with them as they are often working in restricted areas or are up and down ladders and need their tools readily to hand. The soft grip handle features an automatic locking system; a twist to release function allows the blades to be changed quickly with the minimum of fuss. Faithfull VDE screwdrivers are manufactured to BS EN 60900:2012 and are individually tested at 10,000V in a water bath before leaving the factory. This guarantees a safe working limit of up to 1,000V providing the maximum level of safety. Supplied in a compact storage case with the following: 1 x Auto-Locking, Quick Release Soft Grip Handle.4 x Slotted Blades: 0.5 x 3 x 100mm, 0.8 x 4 x 100mm, 1 x 5.5 x 100mm and 1.2 x 6.5 x 100mm.2 x Phillips Blades: PH1 x 80mm and PH2 x 100mm.2 x Pozidriv Blades: PZ1 x 80mm and PZ2 x 100mm.3 x Star Blades: TX10 x 100mm, TX15 x 100mm and TX20 x 100mm.1 x Single-Pole Voltage/Mains Tester: 3 x 140mm 100-250V (not VDE certified). Specification: Screwdriver Length (inc. handle): 190/210mmStorage Case Dimensions: 210 x 130 x 44mm

The Faithfull Multi-Tester is more than just a conventional voltage tester. The built-in battery powered sensor allows the multi-tester to perform a number of different functions without the need to dismantle a suspected faulty item or have any contact with live parts. The multi-tester is fully insulated and is supplied complete with full operating instructions and will perform the following tests: continuity, bulbs, fuses, short circuits, cable tracking, mains sockets and microwave oven leakage. SAFETY NOTEAlways read and the instruction supplied with the multi-tester.Never use a multi-tester until you are fully conversant with its use and applications. Never work on live equipment, and if in any doubt, always contact a qualified electrician.

Bahco ERGO™ Through Blade Screwdrivers have been developed according to the scientific ERGO™ process. The high-performance alloy steel blade has been chrome plated and entirely hardened for high protection against corrosion, long life tool. A black oxide tip provides higher accuracy. The blade continues through the handle with no loss of hammer blow energy. A metallic cap provides protection during jobs requiring high impact. The three-component handle provides maximum user comfort. Its soft material with ridged surface provides superior grip and greater force transmission. A flat face prevents the screwdriver from rolling away. Its easy to choose the right tip, thanks to the colour-coded handle and permanent symbol on the domed end. Contains: 4 x Slotted: 3.5 x 0.6 x 75mm, 4.5 x 0.8 x 100mm, 5.5 x 1.0 x 100mm and 6.5 x 1.2 x 125mm 2 x Pozidriv: PZ1 x 100mm and PZ2 x 125mm

Bahco Series 039 Through shank Phillips screwdriver colour coded (Red for Phillips) for quick identification of tip type. The striking metal cap at the top of the handle gives ultimate protection during jobs requiring high impact and added force. The shank continues through the handle before contacting to a striking metal cap for ultimate strength. The hole in the handle allows the insertion of a T bar for added force transmission. Bahco Tekno Through Shank Screwdriver. Phillips Tip PH2 x 125mm.

The Vaughan Coarse/Medium Japanese-Style 'Bear' Pull Saw that cuts on the pull stroke. Made from spring steel that is plated for rust resistance. It is interchangeable with other 'Bear' Saw blades and locks securely, yet can be disassembled for convenient storage. The specially ground, triple edged teeth are impulse hardened to retain sharpness. Blade Length: 333mm (13in). Made in Japan.

The Vaughan BS265M Medium / fine Japanese-style 'Bear' Pull Saw that cuts on the pull stroke. Made from spring steel that is plated for rust resistance. It is interchangeable with other 'Bear' Saw blades and locks securely, yet can be disassembled for convenient storage. The specially ground, triple edged teeth are impulse hardened to retain sharpness. Blade length: 265mm (10.1/2in). Made in Japan.

The Vaughan BS250D Bear Saw has the following specifications: Blade Length: 250mm (10in).Total Length: 585mm (23in).

The Vaughan BS240P Extra Fine Japanese-style 'Bear' Pull Saw that cuts on the pull stroke. Made from spring steel that is plated for rust resistance. It is interchangeable with other 'Bear' Saw blades and locks securely, yet can be easily disassembled for convenient storage. The specially ground, triple edged teeth are impulse hardened to retain sharpness. Blade Length: 240mm (8.3/8in). Made in Japan.

The Vaughan BS150D Bear Saw has the following specifications: Blade Length: 150mm (5.1/2in).Total Length: 300mm (12in).

Replacement blade for the Vaughan BS333C Bear Saw.Made from spring steel and plated for rust resistance. With specially ground triple edged teeth, which are impulse hardened.Blade length: 333mm (13 inch).Blade toothing: Coarse/ Medium.

Replacement blade for the Vaughan BS265M Bear Saw.Made from spring steel and plated for rust resistance. With specially ground triple edged teeth, which are impulse hardened.Blade length: 265mm (10.1/2 inch).Blade toothing: Medium / Fine.

Replacement blade for the Vaughan BS250D Bear Saw.Made from spring steel and plated for rust resistance. With specially ground triple edged teeth, which are impulse hardened.Blade length: 250mm (10 inch).

Replacement blade for the Vaughan BS240P Bear Saw.Made from spring steel and plated for rust resistance. With specially ground triple edged teeth, which are impulse hardened.Blade length: 240mm (8.3/8 inch).Blade toothing: Extra fine.

Replacement double edged blade for the Vaughan BS150D Bear Saw.Made from spring steel and plated for rust resistance. With specially ground triple edged teeth, which are impulse hardened.Blade length: 150mm (5.1/2 inch).

100 x Starrett Bi-Metal Unique Safe-Flex Hacksaw Blades 300mm (12in) x 32tpi

100 x Starrett Bi-Metal Unique Safe-Flex Hacksaw Blades 300mm (12in) x 24 TPI

100 x Starrett Bi-Metal Unique Safe-Flex Hacksaw Blades 300mm (12in) x 18tpi

2 x Starrett; Bi-Metal Unique Safe-Flex Hacksaw Blades 300mm (12in) x 32tpi

50 x Starrett Bi-Metal Unique Safe-Flex Hacksaw Blades 300mm (12in) x 32tpi

2 x Starrett Bi-Metal Unique Safe-Flex Hacksaw Blades 300mm (12in) x 24tpi

50 x Starrett Bi-Metal Unique Safe-Flex Hacksaw Blades 300mm (12in) x 24tpi

50 x Starrett; Bi-Metal Unique Safe-Flex Hacksaw Blades 300mm (12in) x 18tpi

The Stanley FatMax Folding Jab Saw with a three blade locking angle mechanism at 90, 135 and 180. Its triple bevelled toothing allows easier cutting that is up to 50% faster. The blade's sharp point is ideal for punching through plasterboard. For a comfortable and secure grip, the jabsaw has an anti-slip ergonomic bi-material handle.

Faithfull Soft Grip Padsaw Handle with a narrow blade that makes it ideal for working in awkward and restricted locations, including cutting out letter boxes, keyholes, switch boxes and cutting behind obstructions. The blade length can be adjusted by pushing the blade back into the handle making the saw easy to use in restricted areas. The saw has a soft grip handle for user comfort and provides a firm non slip grip for ease of control. The supplied blade is suitable for cutting a wide variety of natural timbers, the saw may also be used with standard hacksaw blades when working on metal. The capabilities of this tool make it an essential selection for most toolboxes. Complete with 2 blades. Specification Overall Length: 250mm (10in).

The narrow blade of the padsaw makes it ideal for working in awkward and restricted locations, including cutting out letter boxes, keyholes, switch boxes and cutting behind obstructions. The capabilities of this tool make it an essential selection for most toolboxes. Length: 250mm (10in).Complete with 2 blades. Wooden handle with two blades.Blade size: 250mm (10 in)

The Faithfull Professional Aluminium Mini Hacksaw has a heavy-duty aluminium frame and soft grip handle for comfort. Its hexagonal blade holder allows the blade to be set at multiple cutting angles. The blade is easily tensioned by turning the thumbscrew. Supplied with a hardened and tempered 24 TPI blade, which is ideal for small cutting jobs in metal and wood. Blade Length: 150mm (6in).

The Faithfull Mini Saw heavier version of the junior hacksaw with an epoxy coated steel frame and moulded pistol-grip handle which incorporates the blade tensioning nut, supplied with a hardened and tempered blade which is ideal for small cutting jobs in metal and wood. Blade Length: 150mm (6in).Replacement blades. (FAIJHB or FAIJHBS).

Pack of 10 Faithfull Junior Hacksaw Blades 150mm (6in) 32 TPI

1 x Bahco SE-15-36 Economy Bowsaw 900mm (36in)

1 x Bahco SE-15-30 Economy Bowsaw 755mm (30in)

1 x Bahco SE-15-24 Economy Bowsaw 600mm (24in)

The Bahco SE-16-21 Economy Bowsaw has a pointed nose for better access in tight areas.

The Faithfull FAICSBS coping saw blades have the following specifications:Application: Wood cutting. Length of blade: 165mm (6 1/2 inch). 14 tpi.

ROCOL METAL REPAIR Compound is a solvent free, permanent metal repair putty which can be used to repair castings, valve and pump components. Binds to a wide range of substrates: metal, glass, ceramic, concrete, fibreglass and wood. Eliminates the need for welding and brazing. It can be applied underwater. Specification Cure Time: 4 MinutesFull Cure: 1 HourPermanent Strength: up to 23MPaTemperature Range: up to150C

ROCOL M23660 Gas Tap Lubricant lubricates and seals gas taps and taper plug cocks. Developed in conjunction with cooker and tap manufacturers for taper gas taps operating with 1st, 2nd and 3rd family gases. Suitable for high temperature applications up to 120C. Excellent anti-wear and anti-seize properties. Meets the requirements of BS5494:1978, service No. 6 (30,000 operations).

ROCOL Gasseal Non-Setting Sealant is a non-setting pipe sealant used for metallic threaded joints. Non corrosive to aluminium, brass, copper, low carbon steel and zinc. Suitable for use with natural gas and LPG pipework. Joints can be assembled and pressure tested immediately. Resists vibration. Compatible with foam forming leak testers. Independently tested by BSI to BS EN 751-2: 1997 Part 2 Class B. Specification Temperature Range: -20 C to 125C

This RIDGID 811A Optional Die Head BSPT has a (QO) Quick Opening manual release for user-specified thread lengths. It is ideal for use with 2in threading machines and is used to cut threads in a right direction. Specification Model: 811A.Thread Direction: Right Handed.Oil Through Head: Yes.Die Type: Universal.Capacity: Pipe 3-50mm (1/8 - 2in), Bolt: 6-50mm (1/4 - 2in).Weight: 5.9kg.

RIDGID Threading Machine Dies Size: 1/2 - 2 1/2in BSPT.

The RIDGID 2017 Telescopic Basin Wrench has an innovative design that makes working with tap fittings and retaining nuts easier than ever. It has a built-in, water-resistant LED light, that provides direct illumination of your work, with auto-shut off for maximum battery life. The removable, 180 pivoting T-handle allows you easier access in tight spaces, whilst the 3/8in square drive connection lets you use your ratchet or breaker bar for additional leverage and maximum torque. The ergonomic, contoured grip overmold handle increases leverage and improves grip, while its new body/button design enables effortless telescoping, 240-425mm (10-17in). Specification:Capacity: 12-32mm (1/2-1.1/4in).Length: 12in - 17in fully extended.Weight: 1.2kg (2.5lbs).

The Ridgid K-1 Combination Auger provides an all-in-one solution for removing blockages from urinals and shower drains. The auger's dual power operation provides additional power necessary for removing tough obstructions. Its telescoping design provides additional cable length for obstructions that are further down the line. It has a 'C' cutter head that is ideal for breaking up hard blockages. The left-hand wound cable provides strength and prevents kinking. SpecificationsPipe Sizes: Up to 2in (50 mm) Cable Length: 4ft (1.2 m)Cable Diameter: 3/8in (10 mm)Operation: Manual or drill poweredApplications: Urinals and shower drainsCutter Head Type: C cutter

These portable Handheld threading machines from RIDGID are designed to thread pipe more easily, more quickly and more efficiently. They feature a quick-release system that helps avoid extra hassle when installing and removing the die head. A 2 'V' jaw design support arm helps improve grip and increases safety during operation. It has a die cast aluminium permanently greased gear head with a forward/reverse, on/off two-step momentary contact slide switch. The 690-I threader has a durable die cast gear housing and a fibreglass-reinforced plastic body. An overmoulded handle and contoured grip provides optimal control. Standard Equipment: - 1 x 692 Support Arm1 x Carrying Case1 x Ratcheting Ring1 x 1/2in BSPT 11R Die Head1 x 3/4in BSPT 11R Die Head1 x 1in BSPT 11R Die Head1 x 1 1/4in BSPT 11 R Die Head1 x 1 1/2in BSPT 11R Die Head1 x 2in BSPT 11R Die Head Capacity: 1/8in to 2in (3-50mm).Motor: Universal, single phase.Power input: 1,020 Watt.Voltage: 110vLength: 61cm.Weight: 9.6kg (Powerdrive Only).

The RIDGID 975 Roll Groover acts as 2 tools in one. It can mount onto the 300 Power Drive for machine powered roll grooving but is also designed to manually roll groove in-place pipe. The 975 Combo Groover includes new, patented auto tracking technology for significantly easier grooving. Whether you're doing machine-powered or manual grooving, the Auto Tracking gauge keeps the pipe automatically engaged to the groover throughout the grooving process. The 975 also includes a permanently depth setting gauge for quicker, repeatable set-up. When manually roll grooving, the 975's 55% higher gear reduction means less hand force required versus competitive manual roll groovers. This is especially helpful for over-head roll grooving. A tough, ductile iron construction means the 975 can absorb jobsite abuse and provide accurate grooves time after time. A cast-in handle makes the 975 easily portable to and from the jobsite. Capacity: 1 ¼in - 6in Schedule 10 and Schedule 40 steel, aluminium, and PVC pipe.1 1/4in - 6in Schedule 10, 1 1/4in - 2in Schedule 40 stainless steel pipe, 11/2in - 3in Schedule 80 PVC pipe. With roll change, 2in - 8in copper tube (Type K, L, M, and DWV).Depth Adjustment: Adjusting screw and integral, index depth gauge.Actuation: Feed screw with 1/2in ratchet wrench (included), or any 15/16in hex wrench. Power Drive Mounting: RIDGID 300 Power Drive 38/57 RPM (reverse direction only).

The RIDGID E110 Offset Hex Wrench design gives multi-sided, secure grip on all hex nuts, square nuts, unions and valve packing nuts. The extra-wide opening is ideal for securing drain nuts on sinks and tubs and the thin, smooth jaws slip into the tightest places. Specification Size: 240mm (9 1/2in).Pipe Capacity: 29-67mm (1.1/8 - 2.5/8 in).Weight: 0.6kg.

The RIDGID K-400 Drum Machine offers several unique, user-friendly features to make the toughest drain cleaning jobs easier and hassle-free. Designed with a sleek profile, the Model K-400 is a great fit for drain cleaners, service plumbers, facility and institutional maintenance departments and property management companies. The integrated transport cart allows for easy movement to and from the job site. Heavy-duty, large wheels easily navigate over bumps and up stairs. There is also an integrated telescoping handle that provides high-handle height during transport. It is fitted with AUTOFEED, a patented, automatic cable feed that powers the cable in and out of the drain. Reverse the direction of the Autofeed and the cable feeds back into the drum A cable control system causes the drum to stop spinning when the blade becomes lodged in a blockage, limits potential for cable to flip-over in the drum and helps to indicate to the operator when blockages are encountered. Solid Core Cable uses a tough 3⁄8in (10mm) Integral Wound (IW) cable that is rugged and kink resistant. Comes with 1 x C-32IW 3/8in (10mm) x 75ft (23m) Integral Wound Solid Core Cable, 1 x Pair of Gloves, 1 x T-260 Tool Kit (T-202 Bulb Auger, T-205 C Cutter, T-211 Spade Cutter A-13 Pin Key) and 1 x AUTOFEED Attachment. Specification Input Power: 380 Watt, 230/240 Volt. Cable Spin Speed: 165 RPM.Drum Capacity: 3/8in (10mm) Diameter Cable: 100ft (30.5m). Length: 24in (61cm).Height: 23in (58.5cm).Width: 17in (43.2cm).Weight Machine Only: 20.4kg.Cable Weight: 11.8kg.

This Ridgid 110/115 Volt Power Threader has a universal 1.7kW (50-60Hz) motor and features a hammer-type chuck with replaceable, rocker action jaw inserts. Its through-the-head oiling system has adjustable flow and an integral oil reservoir. The gerotor pump is self-priming and ensures a constant flow of the oil.Spindle speed: 36 RPM.Threads ¼ to 3-inch pipe Supplied with:Die Heads: Model 815A 1⁄8 - 2 inch, BSPT; Model 928A 21⁄2 - 3 inch, BSPT.Dies: 1⁄2 - 3⁄4-inch BSPT Alloy. 1 - 2-inch BSPT Alloy. 21⁄2 - 3-inch BSPT High Speed.Cutter: Model 763, 1⁄4 - 3-inch, self-centering, with E-1032 cutter wheel.Reamer: Model 743, 1⁄4 - 3 inch, 5-Fluted.Oil: 5 litres thread cutting fluid.

RIDGID Threading Machine Dies Size: 1 - 2in BSPT.Die Material or Type: Alloy RH.

RIDGID Threading Machine Dies Size: 1/2 - 3/4in BSPT.Die Material or Type: Alloy RH.

This Ridgid Manual Hand Threader has a cast-iron construction and a new die profile for superior thread quality. An increased number of larger coolant slots allow for better die lubrication. The cast-iron cover plate is rigid and provides a more consistent thread quality. The set comes complete with a ratchet handle, dies, die heads, and metal case. Dies supplied: 3/8in, 1/2in, 3/4in, 1in, 1.1/4in, 1.1/2in and 2in.