The Stabila LAR 350 Rotation Laser is a fully automatic motor-driven rotation laser for horizontal and vertical applications, as well as manual inclination in 2 axes. With innovative motion control for quick, reliable and convenient laser operation via the supplied remote control. It has several useful functions, including: Dual slope inclination function, which allows for controlled inclination setting of up to 5 on 2 axes; Section mode enables you to set up a working area, meaning that the laser beam is only emitted in a defined area; Manual alignment function provides a pivoting axis in vertical operation; The integrated LED assist system allows for easy operation and safety in the workplace. It alerts the user at various points, for example, which axis is currently tilted or is being tilted. The body of the laser is IP65 rated, dust and waterproof. It also incorporates the patented STABILA PROTECTOR system, which offers maximum protection, even when the laser is dropped from a tripod at a height of up to 1.80m. Supplied with the Stabila REC300 Receiver which has 2 displays: one each on the front and back with digital display of the reference deviation in mm, inches in (fractions) and ft. Allowing you to read the deviation from the reference height directly. Acoustic guidance with selectable volume and a series of symbols will indicate your distance from the reference height and whether you are too high or low. Its loud signal can be heard even with loud background noise. Also supplied with: 1 x RC-LAR 350 Remote Control, 1 x BST-S Construction Tripod, 1 x NL Levelling Rod, 1 x 90 Angle Rail, 1 x Laser Goggles, 1 x Target Plate, 1 x Carrying Case, 2 x D 1.5V Batteries and 4 x AA 1.5V Batteries. Specification: Levelling Accuracy:0.10mm/mRange: 800mSelf-Levelling Range:5Laser Class: 2Operating Life: 80 hoursPower: 2 x 1.5V D Cell batteries (supplied)Protection Class: IP65Tripod Connection: 5/8in

The Stabila LAR 160 Rotation Laser has a high levelling accuracy of 0.1mm/m, fast self-levelling within 20 seconds. Fully automatic with four laser functions: horizontal and vertical rotation, plumb line function and right angle (90) in vertical operation. Easy to use, via three control buttons: on/off, tilt mode and manual mode. Covered with a shock-absorbent soft grip casing that provides protection against impacts whilst the stable housing cover protects the laser optics. Dustproof and waterproof to IP65. With two integrated 5/8in threads in the housing, for horizontal and vertical tripod use. Supplied with: 1 x BST-S Construction Tripod, 1 x NL Levelling Rod, 1 x REC 160 RG Receiver, 1 x Laser Goggles, 1 x Target Plate, 2 x D 1.5V Batteries, 2 x AA 1.5V Batteries and 1 x Carrying Case. Specification: Laser Type: RedAccuracy: 0.1mm/mDiameter of Working Area with Set Receiver: 600mLaser Class: 2Laser Wave Length: 635nmIP Rating: IP65

The Stabila LAR 160 Rotation Laser has a high levelling accuracy of 0.1mm/m, fast self-levelling within 20 seconds. Fully automatic with four laser functions: horizontal and vertical rotation, plumb line function and right angle (90) in vertical operation. Easy to use, via three control buttons: on/off, tilt mode and manual mode. Covered with a shock-absorbent soft grip casing that provides protection against impacts whilst the stable housing cover protects the laser optics. Dustproof and waterproof to IP65. With two integrated 5/8in threads in the housing, for horizontal and vertical tripod use. Supplied with: 1 x REC 160 RG Receiver, 1 x Laser Goggles, 1 x Target Plate, 2 x D 1.5V Batteries, 2 x AA 1.5V Batteries and 1 x Carrying Case. Specification: Laser Type: RedAccuracy: 0.1mm/mDiameter of Working Area with Set Receiver: 600mLaser Class: 2Laser Wave Length: 635nmIP Rating: IP65

The Stabila LAR 160 G Rotation Laser has a high levelling accuracy of 0.1mm/m, fast self-levelling within 20 seconds. Fully automatic with four laser functions: horizontal and vertical rotation, plumb line function and right angle (90) in vertical operation. Easy to use, via three control buttons: on/off, tilt mode and manual mode. Covered with a shock-absorbent soft grip casing that provides protection against impacts whilst the stable housing cover protects the laser optics. Dustproof and waterproof to IP65. With two integrated 5/8in threads in the housing, for horizontal and vertical tripod use. Utilises Stabila Greenbeam technology for improved visibility of the rotating laser beam. Green laser beams are 4x more visible to the human eye than red beams. Supplied with: 1 x REC 160 RG Receiver, 1 x Target Plate, 2 x D 1.5V Batteries, 2 x AA 1.5V Batteries and 1 x Carrying Case. Specification: Laser Type: GreenAccuracy: 0.1mm/mDiameter of Working Area with Set Receiver: 600mLaser Class: 2Laser Wave Length: 510-530nmIP Rating: IP65

The Stabila BST-S 5/8in Thread Construction Tripod extends between 100-160cm in height. The aluminium construction is lightweight and durable and its spiked feet are stable on any terrain. The adjustable legs feature a rapid locking function and spread stopper. Also comes with a carrying strap for easy transportation. It accepts the Stabila laser level base plate.

The Stabila BST-K-M Mini Column Construction Tripod extends between 69 - 170cm in height. It has a compact design, that makes it easy to store and also enables working at lower heights than when working with traditional tripods.

The Stabila BST-K-L Column Construction Tripod extends between 98-220cm in height.

The Stanley Intelli Tools 360 Cross Green Line Laser Level projects a 360 horizontal line and 100 vertical line. Ideal for use in a wide variety of jobs, including woodworking, drywall installation, framing and roofing. The body is fitted with overmould housing for protection against knocks. Easy-to-use, fitted with a touch pad control panel and a 3-position lock switch with manual mode. It is IP50 rated, making it ideal for indoor DIY and residential construction jobs. Supplied with: 4 x AA alkaline batteries, 1 x QuickLink™ Bracket and 1 x Storage Pouch. Specification: Level Accuracy:0.4mm/mWorking Range: 25mPower: 4 x AA batteries (supplied)Thread: 1/4in

The Stanley Intelli Tools Cross90™ Green Beam Laser is self-levelling and projects a 100 vertical beam, horizontal beam and an additional 90 vertical beam. The 90 beam is ideal for tile or flooring installation or to lay out partition walls with ease. The green beams allow for enhanced visibility while working. The body is fitted with overmould housing and rubber bumpers on all corners for protection against knocks. Easy-to-use, fitted with a touch pad control panel and a 3-position lock switch with manual mode. It is IP50 rated, making it ideal for indoor DIY and residential construction jobs. Supplied with: 2 x AA alkaline batteries, 1 x QuickLink™ Bracket and 1 x Storage Pouch. Specification: Level Accuracy:0.5mm/mWorking Range: 16mPower: 2 x AA batteries (supplied)Thread: 1/4inWeight: 0.6kg

The Stanley Intelli Tools 360 Cross Red Line Laser Level projects a 360 horizontal line and 100 vertical line. Ideal for use in a wide variety of jobs, including woodworking, drywall installation, framing and roofing. The body is fitted with overmould housing for protection against knocks. Easy-to-use, fitted with a touch pad control panel and a 3-position lock switch with manual mode. It is IP50 rated, making it ideal for indoor DIY and residential construction jobs. Supplied with: 4 x AA alkaline batteries, 1 x QuickLink™ Bracket and 1 x Storage Pouch. Specification: Level Accuracy:0.4mm/mWorking Range: 20mPower: 4 x AA batteries (supplied)Thread: 1/4in

The Stanley Intelli Tools Cross90™ Red Beam Laser is self-levelling and projects a 100 vertical beam, horizontal beam and an additional 90 vertical beam. The 90 beam is ideal for tile or flooring installation or to lay out partition walls with ease. The body is fitted with overmould housing and rubber bumpers on all corners for protection against knocks. Easy-to-use, fitted with a touch pad control panel and a 3-position lock switch with manual mode. It is IP50 rated, making it ideal for indoor DIY and residential construction jobs. Supplied with: 2 x AA alkaline batteries, 1 x QuickLink™ Bracket and 1 x Storage Pouch. Specification: Level Accuracy:0.5mm/mWorking Range: 12mPower: 2 x AA batteries (supplied)Thread: 1/4inWeight: 0.6kg

The Stanley Intelli Tools Cubix™ Cross Line Laser Level is ideal for indoor use, DIY and light residential construction jobs, including levelling chair rails and hanging cabinets. By projecting bright green vertical and horizontal lines onto flat surfaces, users can easily level what they are installing. The Cubix™ is protected by a durable, overmoulded housing. It projects a green vertical line and horizontal line. Fitted with a touch pad control panel, locking pendulum and a 3 position lock switch with manual mode. Supplied with: 1 x Protective Pouch1 x Removable QuickLink™ Bracket2 x AA batteries1 x Quick Start Guide Specification: Level Accuracy:0.6mm/mWorking Range: 16mPower: 2 x AA batteries (supplied)Thread: 1/4in

The Stanley Intelli Tools Cubix™ Cross Line Laser Level is ideal for indoor use, DIY and light residential construction jobs, including levelling chair rails and hanging cabinets. By projecting bright red vertical and horizontal lines onto flat surfaces, users can easily level what they are installing. The Cubix™ is protected by a durable, overmoulded housing. It projects a red vertical line and horizontal line. Fitted with a touch pad control panel, locking pendulum and a 3 position lock switch with manual mode. Supplied with: 1 x Protective Pouch1 x Removable QuickLink™ Bracket2 x AA batteries1 x Quick Start Guide Specification: Level Accuracy:0.6mm/mWorking Range: 12mPower: 2 x AA batteries (supplied)Thread: 1/4in

The Stanley FatMax 77-123 CLLi Cross Line Laser Kit has a 25m range for use in an interior or exterior working environment. It projects 1 horizontal and 1 vertical line to create a cross line, making this ideal for quick layout jobs. It has an Out of True level sensor, magnetically damped pendulum and a pendulum lock for safe transportation. Supplied with a 2.7m Floor to Ceiling Pole Kit. Specification: Level Accuracy: 4mm @10mWorking Range: 25mPower: 3 x AA batteries (supplied)Laser Class: 1Thread: 1/4in

The Stanley Intelli Tools C-Line Cross Line Laser Level projects bright red vertical and horizontal lines onto flat surfaces. Perfect for DIY and light residential construction jobs including levelling chair rails and hanging cabinets. Users can easily ensure that the item they are installing is level. Fitted with a 3-position pendulum lock (on/off/manual mode) for safe transportation. Rated to IP50 to protect against dust. Supplied with a magnetic L-Bracket. Specification: Level Accuracy: 6mm @10mWorking Range: 10mPower: 2 x AA batteries (supplied)Protection: IP50 RatedThread: 1/4in

The DEWALT DCE0825D1G 5 Spot Cross Line Laser Green projects a full cross line (horizontal vertical) and 5 independent spot points. The cross line function features a 150 fan angle, providing ample coverage with little set-up time. It has an integrated magnetic bracket, so it can be directly mounted to metal track, ensuring accurate projections all around. The body of the level is IP54 rated, meaning it is resistant to debris/water. The overmoulded housing and thick glass protect the tool and helps maintain calibration under jobsite conditions. Full-time pulse mode allows use with detector (NOT SUPPLIED) which help to maintain full brightness for visibility and extends range. Supplied with: 1 x 12V 2.0Ah Li-ion Battery, 1 x DCB107 Battery Charger, 1 x Target Green Card, 1 x Green Glasses, 1 x Integrated Magnetic Bracket and 1 x TSTAK Compatible Kitbox. Specification: Laser Class: 2, Level Accuracy:3mm@10m.Self-Levelling Range: 4.Visibility: Indoor: 30m, Dot: 45m.Thread: 1/4in.

The DEWALT DW089K is a 3-Way Self-Levelling Multi Line Laser used for marking Horizontal, Vertical and Side Lines. With overmoulded housing which helps maintain calibration under jobsite conditions. an adjustment dial for fine line movement (vertical side) with built-in magnetic pivot bracket mounts easily on metal surfaces. The 3 button operation and low battery indication allows for ease of use and is accurate to0.3 mm/m in levelling applications with self-levelling up to 4 degrees surface angle with automatic out of level indication, marks a levelled line in seconds. Can be used for a variety of applications: acoustical drop ceilings, cabinet installation, chair rail installation, electrical outlet installation, interior trim carpentry, raised flooring installation, and bathroom and kitchen tiling installation. Supplied with: 1 x Wall Mount Bracket, 1 x Heavy-Duty Carry Case and 4 x AA Batteries. Specification: Level Accuracy0.3 mm/mWorking Range: 15m Indoor (up to 50m with Detector)Power: 4 x AA batteries (supplied)Laser Class: 2 <1mWBeams: 3 vertical/horizontal/sideThread: 1/4inWeight: 0.8kg

The DEWALT DW088K 2-Way Self-Levelling Line Laser is accurate to0.3mm/m in levelling applications. Self-levelling up to 4 surface angle with automatic out of level indication. It uses a simple 2 button operation with a low battery indication for ease of use. The built-in magnetic pivot bracket mounts easily on metal surfaces, whilst the overmoulded housing and thick glass protects the tool and helps maintain calibration under jobsite conditions. The included kit box helps to protect the unit and helps maintain calibration when stored in the gang box. Supplied with: 1 x Wall Mount Bracket, 1 x Heavy-Duty Carry Case and 3 x AA Batteries. Specification: Laser Class: 2, Level Accuracy:0.3mm/mSelf-Levelling Range: 4Visibility Indoor: 15m (50m with Detector)Power: 3 x AA batteries (supplied)Thread: 1/4inWeight: 0.46kg

The DEWALT DW088CG Cross Line Green Laser is self-levelling up to 4 and accurate to0.3 mm/m in levelling applications. It has an integrated magnetic pivoting base with 1/4in thread for use with tripod. With automatic out of level indication that can mark a levelled line in seconds and maintains full brightness for visibility. The body of the level is IP54 rated, meaning it is resistant to debris/water. The overmoulded housing and thick glass protect the tool and help maintain calibration under jobsite conditions. Full-time pulse mode allows use with detector. Works with DE0892G detector (not supplied) up to the distance of 50 metres. Specification: Laser Class: 2, Level Accuracy:3mm@10mSelf-Levelling Range: 4Visibility Indoor: 20mThread: 1/4inPower: 3 x AA batteries (supplied)

This Stanley 10788 Instant Change Retractable Blade Utility Knife features an instant change tool, a free push button blade change for hassle free blade changes. Its interlocking nose design holds blades firmly in place, preventing nose spread and body separation which might otherwise cause blades to break-loose and cause injury.This knife has a long-lasting, strong, and durable construction featuring a cast metal core with bi-material soft panels for a comfortable grip. There is an integrated string and foil cutter so there is no need to expose the blade for these simple jobs. It has a convenient hang hole for lanyards, tethers, and safe storage and the handle will store up to 5 blades. Ideal for general purpose, DIY and construction cutting applications.This knife accepts most types of replacement Stanley utility blades. Specification: Length: 180mm.

The Stanley Safety Wrap Cutter is made from lightweight, but tough, ABS plastic and is ideal for use in warehouses for cutting shrink wrap, banding, opening boxes and cartons. This Stanley cutter has a specially shaped blade anvil and a full D-shaped handle for protection. The blade is replaceable. Specifications:STA010245: one replacement blade.

Multi-position retractable knife moulded in ABS for lightweight durability.The blade is held in a steel carrier and there are 5 blade adjustments.Features easy blade change system where no tools are required.Supplied with 1 blade.

This Irwin ProTouch Retractable Blade Knife is ideal for general maintenance jobs. It has a lightweight, hard-wearing aluminium body which gives 6 times longer life. It also has thicker walls in areas of greatest wear, e.g., nose underside, and heel. The blades are virtually unbreakable, and have a quick blade change feature, spring-loaded push-button opener. It is designed to fit the hand, allowing maximum grip, and minimum wrist distortion. The blade slider is held permanently in place whilst a magnet holds the working blade in place. Spare blades are held securely so there is no edge damage, and no rattle, featuring a hinged opening mechanism. This knife has an optimised cutting angle to minimise fatigue and includes magnetic blade retention, and storage for up to 5 blades. Patented quick blade release for easy renewal of sharp blade edge.

The Faithfull Professional Safety Utility Knife has a spring-loaded blade holder that automatically retracts when the slider button is released to keep the blade out of harm's way. The die-cast metal body has an interlocking nose design to reduce sideways blade movement, a dual compound ABS and TPR soft grip for comfort, and a hole for attaching to a lanyard. No tools needed for blade change. Simply unscrew the side button and pull the knife sides apart to reveal the internal 5 blade storage compartment and change blades. Ideal for use as a box cutter in retail, warehouse and factory environments. Accepts standard heavy-duty trimming knife blades. Supplied with 5 x SK5 steel blades. Specification: Retracted Length: 150mm (6in).

Supplied with a 25 x 125 x 0.7mm, 7 segment SK5 steel blade. Spare blade code: FAITKBS25 - Pack of 10 Blades. Specification: Overall Length: 232mm (9in)

This Faithfull Heavy-Duty Retractable Snap-Off Trimming Knife is supplied with an 18 x 100 x 0.5mm, 8 segment, SK5 steel blade. Spare blade code: FAITKBS18 - Pack of 10 Blades. Specification: Overall Length: 195mm (7.1/2in)

The Faithfull Professional Auto-Load Utility Knife features a 3 position button for blade depth setting and a quick-release blade change with an auto-load blade mechanism - it will automatically load the next blade without the need to open the knife. The die-cast metal body has an overlapped nose design for strength, a dual compound ABS and TPR soft grip for comfort, and a hole for attaching to a lanyard. No tools are needed to refill the blade chamber. Simply push the button on the side of the knife to open. The refill chamber holds 5 blades and there is additional storage for a further 5 blades inside the knife. Supplied with 5 x SK5 steel blades. Specification: Retracted Length: 175mm (7in).

The Faithfull Professional Retractable Utility Knife features a quick-release blade change, a 3 position button for blade depth setting, and a safety cutter slot for string and plastic banding. The die-cast metal body has an interlocking nose design to reduce sideways blade movement, a dual compound ABS and TPR soft grip for comfort, and a hole for attaching to a lanyard. No tools are needed to access the blade storage. Simply pull the top-mounted blade compartment upwards for access. Supplied with 5 x SK5 steel blades. Specification: Retracted Length: 172mm (7in).

The Faithfull Professional Fixed Blade Utility Knife holds the blade securely and firmly with no movement, making it ideal for heavy-duty cutting. Its die-cast metal body features an overlapped nose design for strength, a dual compound ABS and TPR soft grip for comfort, and a hole for attaching to a lanyard. The knife can be unscrewed to reveal the internal 5 blade storage compartment and enable blade changes. Accepts standard heavy-duty trimming knife blades. Supplied with 5 x SK5 steel blades. Specification: Length (without blade): 160mm (6.1/4in).

These Faithfull Snap-Off Blades have the following specification: Height: 9mmLength: 80mmThickness: 0.4mmSegments: 13Pack Quantity: 10

These Faithfull Snap-Off Blades have the following specification: Height: 25mmLength: 125mmThickness: 0.7mmSegments: 7Pack Quantity: 10

These Faithfull Snap-Off Blades have the following specification: Height: 18mmLength: 100mmThickness: 0.5mmSegments: 8Pack Quantity: 10

The Bahco sports knife has a durable aluminium handle, with stainless steel blades and mechanism. The blades lock securely into position when fully unfolded and are only released with the unlock button. This avoids accidental folding. With a small hole on the back end, the knife allows for a safety strap to be attached. This BAHBSTK Twin Blade Sports Knife features two different blades - one standard utility blade and one sports knife blade with serrated edges. Blade length: 70mmWeight: 202g

This Bahco sports knife has a durable polyamide handle, with stainless steel blades and mechanism. The blade locks securely into position when fully unfolded and is only released with the unlock button. This avoids accidental folding. With a small hole on the back end, the knives allow for a safety strap to be attached, for added safety. The BAHBSLK knife uses utility blades, which can be replaced when blunt.

The Bahco Sports Knife has a stainless steel blade with a serrated portion. Locking mechanism for safe use, blades lock securely into position when fully unfolded. Fitted with a durable aluminium handle. A small hole on the back end of the knife allows for a safety strap to be attached.

The Vaughan Drilling Club hammer designed for striking star drills, cold chisels, brick bolsters, and punches. With rust-resistant blue finish and polished striking faces with generous bevels. Forged from high-carbon steel and with a patented Shock-Blok™ plug in its head, using hickory and rubber to absorb shock. Exclusive air cushioned slip-resistant grip for comfortable use. Made in the USA. Weight: 3 lb.Handle Length: 280mm (11in).

This Vaughan California Framing Hammer with polished California Framer style head and round neck and face. Forged from high-carbon steel and with patented Shock-Blok™ plug in its head, using hickory and rubber to absorb shock. An exclusive air cushioned, slip-resistant grip provides comfortable use. Made in the USA. Weight: 540g (19 oz.)Handle length: 405mm (16 inch)Face: Milled.

The Vaughan E18F Electricians Hammer has a fibreglass handle. Its head is fully polished and forged from high-carbon steel for excellent strength. It has a round extra-long pole, meaning it is ideal for reaching into electrical junction boxes. The Electricians Hammer has a patented hollow core in its fibreglass handle to absorb shock and provide superb balance. It has a steel wedged and epoxy-sealed eye and an exclusive air cushioned, slip-resistant grip. Weight: 510g (18oz).Handle length: 355mm (14in). Made in the USA.

One soft grey and one hard white face.Diameter 38mm (1 1/2 in).Weight: 650g (1 1/2lbs).

Roughneck Double Ended Scutch Hammer which is ideal for all types of stone dressing. They are used for preparation of surface prior to rendering. The double ends make it ideal to have two sized scutch combs attached for different work surfaces. Unique treble injected TPR soft-grip handle for comfort during use and for reduced fatigue.

The Faithfull Bricklayer's Single End Scutch Hammer has a hardened square striking face at one end with a single comb slot at the opposite end to fit replaceable one inch scutch combs or chisel bits (droves). Fitted with a traditional hickory handle. These specialist hammers are the most commonly used tools for dressing and cleaning bricks.

These wedges are designed for use in conjunction with the correct wooden handle when replacing damaged handles on hammers, axes and other striking tools. Includes malleable steel hammer wedges and wooden wedges and when fitted correctly, they provide a secure and safe attachment of a striking head to a wooden handle. Kit consists of 2 Steel Wedges : 12mm Width (Size 1)1 Wooden Wedge : 17 x 25mm Suitable for head weights 4oz to 1lb 2 Steel Wedges : 15mm Width (size 2)1 Wooden Wedge : 25 x 35mm Suitable for head weights 1lb to 2.5lbs 2 Steel Wedges : 18mm width (size 3)1 Wooden wedge : 30 x 30mm Suitable for head weights 3lb to 7lbs 2 steel wedges : 21mm width (size 4)1 wooden wedge : 30 x 40mm Suitable for head weights 10lb to 28lbs Note Hammer wedges are NOT suitable for use with fibreglass replacement handles.

The Faithfull Bricklayer's Double Ended Scutch Hammer specifically designed for dressing bricks and masonry. Fitted with a fibreglass handle which is lightweight, extremely strong and resistant to moisture.Also available are replaceable one inch scutch combs or chisel bits (droves).; SAFETY TIPWear safety spectacles, or goggles, when hammering.Never use hammers to strike hardened metal.Strike squarely and avoid glancing blows.Never strike with the side of a hammer.Do not use a hammer with a loose or damaged head.Remember that left for a long time in very dry conditions, wood can dry out. Always check to ensure that this has not happened to your handle.Always use the correct hammer for the job.

The BlueSpot 26200 1.1kg (2.4lb) Fibreglass Lump Hammer features a soft feel handle for a more secure grip. The fibreglass shaft reduces fatigue and increases shock absorption during prolonged use. The striking face has a bevelled edge to protect against chipping the hammer.Specification: Weight 1.1kg (2.4lb).

The BlueSpot Steel Shafted Claw Hammer features a contoured handle for a more secure grip. Its steel shaft reduces fatigue and increases shock absorption during prolonged use. The striking face has a bevelled edge to protect against chipping the hammer. Weight: 16oz (450g)

Bahco 2-303-16-2-0 square needle cut file with parallel surfaces which taper to a point. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Surfaces are double cut. Size: 16cm.Cut: 2 (smooth).Type: square needle.File width: 2.4mm.Teeth per cm: 38.

Bahco Knife Needle File Unhandled Cut 2 Smooth 2-308-16-2-0 160mm (6.2in). This file is used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. It is for fine filing and polishing jobs.Edges and surfaces taper to a point. Length: 160mmWidth: 5.4mmTeeth per cm: 38Cut: Smooth

Bahco Flat Needle File Cut 2 Smooth 2-301-16-2-0 160mm (6.2in). Ideal for fine filing and polishing jobs. This file is used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.The surfaces are double cut and the edge are single cut.File length: 160mmFile width: 5.45mmFile thickness: 1.2mmTeeth per cm: 38Type of cut: smoothWeight: 8g

This Bahco ERGO™ File Set is perfect for fine filing and polishing jobs. The handle has been developed according to the scientific ERGO™ process. Supplied in a snap-shut plastic wallet with a hanging hole. Contains one of each handled file: hand, warding, square, three-square, half-round and round. Specification: Type of Cut: SmoothBlade Length: 100mm

Set of 12 needle files in snapshut plastic wallet with hanging hole. One of each of the following : Hand, flat, half-round, round, three-square, square, crossing, knife, barrette, slitting, round edge joint and marking files, with handle included. For fine filing and polishing jobs.Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Size: 16cm.Cut: 2 (smooth).Type: Needle set (12).

Bahco set of 6 needle files in snapshut plastic wallet with hanging hole. This set contains 1 of each of the following: flat, flat tapered, half-round, round, three square and square smooth cut files and includes one handle. They are excellent for fine filing and polishing jobs and are used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Size: 16cm.Cut: 2 (smooth).Type: Needle set (6).Teeth per cm: 38

This Trend GRAB/SE1/set Damaged Screw Remover Set (2pc) has versatile double-ended bits to remove damaged screws, machine screws and broken bolts from wood, metal and plastic. Made from high-speed steel they can remove screw sizes from Nos. 6 - 14 and broken bolts from size M4 - M8, they will remove these cleanly from wood, metal or plastic.Removing screws made of any alloy, including soft brass, and also removes free spinning screws. They have a Winslow tip for self-centring and are double ended (burnisher and tapered thread). The hex shoulder aids removal of jammed screws or bolts and the serrated extracting end of the tool results in torque for hard to remove screws. Specifications: Set of two bits, Size No 2 and No 3.Screw Sizes: No 6 to No 14.Bolt Sizes: M4 to M8.

Screw pitch gauges quickly determine the pitch of various external and internal threads. These gauges consist of a substantial steel case with a number of folding leaves at both ends, each leaf having teeth corresponding to a definite pitch. Whitworth standard - 55 threads No. of leaves: 30 TPI range: 3 1/2 - 60 With positive stop.

Supplied with a tapping drill.Kit 1/2 Whit x 12 tpiLength 1 1/2 X Diameter

Supplied with a tapping drill.Kit 3/8 Whit x 16 tpiLength 1 1/2 x Diameter

Supplied with a tapping drill.Kit 5/16 Whit x 18 tpiLength 1 1/2 X Diameter

Supplied with a tapping drill.Kit 1/4 Whit x 20 tpiLength 1 1/2 x Diameter

Kit 1/4 BSP x 19tpiLength 1 1/2 x Diameter

Kit 3/8 BSF 20tpi

Kit 5/16 BSF 22tpi

Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplifiy changeover from unified to metric or vice versa.They reduce thread wear and are interchangeable with other brands of inserts or tooling. Size. 1/4 BSF X 26TPI Length. 1 1/2 x Diameter.

An extremely handy pocket sized reference booklet of data charts and tables for the drawing office, toolroom or workshop. This metric revision publication is produced by Zeus Precision Charts Ltd, who are members of the British Standards Institution. The 28 laminated pages contain data on standard drill sizes and decimal equivalents, tapping drills and clearances for metric and imperial threads, BS4500 tolerances, hardness comparisons, jig boring co-ordinates for equally spaced holes, allowances for sheet metal bending and Morse tapers. Also, long tables for sine, cosine, tangents and cotangents.

The Moore Wright 891 Series Adjustable Depth Micrometer features interchangeable depth rods, with a 4mm diameter. These adjustable depth micrometers conform to BS6468:1984. Base Length: 63.5mm / 2.1/2in. The Moore Wright 891M150 Adjustable Depth Micrometer has the following specification: Range: 0-150mm.Resolution: 0.01mm.

The Moore Wright 890M Fixed Type Depth Micrometer has a fixed depth rod with a 6.5mm diameter. It is fitted with a 'speeder' type ratchet and a lock screw for added user convenience. Conforms to BS 6468:1984. Specification: Base Length: 63.5mm (2.1/2in)Range: 0-25mmResolution: 0.01mm

The Moore Wright MW496-01 Magnetic Snake Stand has a corrosion resistant chrome plated flex arm that will hold rigidly in almost any position. The V-shaped base is perfect for mounting on rounded surfaces. There is a powerful magnetic base that can be turned on and off depending on the user requirements and the magnetic force is equal to 40kg/85lbs.

The Moore Wright MW475-01 Magnetic Indicator Stand features fine adjustment and accepts dial test indicators, digital indicators, and normal indicators. It is a universal model which can be used for indicators with or without a lug style back plate. The stand's powerful magnetic base can be turned on and off depending on the user requirements, and there is a magnetic force of 80kg/175lbs.

The Moore Wright 200 Series Digital External Micrometer has a tapered design that provides easier access to difficult areas and a hammertone finished frame with a high quality insulated grip. It also has tungsten carbide measuring faces and a constant force ratchet on the thimble. The large LCD display allows for 4 types of measurement (mm/inch conversion and Absolute/Incremental reading) and a zero setting. The micrometers are manufactured to DIN 863 standards. Specification Range: 0-25mm/0-1in.Resolution: 0.001mm/.00005in.

The Moore Wright Traditional External Micrometer has a pearl chrome plated frame with insulation pads, tungsten carbide measuring faces and a tapered bow frame. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards. Supplied in plastic pocket case. The 1961M Traditional External Micrometer has the following specification: Micrometer Range: 0-25mm. Measuring Faces: Flatness: 0.001mm, Parallelism: 0.003mm, Accuracy: 0.003mm.Resolution: 0.01mm.

The Moore Wright Water Resistant Series Digital Calliper are fitted with a patented ceramic capacitive sensor and a large LCD display offering 4-way measurement (mm/inch, absolute/incremental). They can be zeroed at any point on the scale and are fitted with a conveniently located on/off switch. The callipers are manufactured to DIN 862 standards, and are water and dust resistant to IP54 specifications. Supplied with a CR2032 battery. Specification:Range: 0-150mm (0-6in).Resolution: 0.01mm (0.0005in).Jaws: 40mm.

The Moore Wright DPC Series Digital Calliper has a polycarbonate frame and offers 4-way measurement (mm/inch, absolute/incremental) with an accuracy of 0.2mm/0.008in. The calliper can be zeroed at any point on the scale.Supplied with a CR2032 battery and a vinyl pouch. Specification:Range: 0-150mm (0-6in).Resolution: 0.01mm (0.0005in).Jaws: 40mm.

This Facom 11 piece shock absorbing punch set contains drift, nail and centre punches. Contains: 6 x Drift punches 2, 3, 4, 5, 6 and 8mm.4 x Nail punches 4, 5, 6 and 8mm.1 x Centre punch 6mm.

The Facom 249.GJ7 7-piece set consists of 7 sheathed impact tools/drift punches. The punches are tough and durable. With very high tensile strength, they feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption. Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener. This set contains:1 x 249.G2 punch - 2mm x 140mm.1 x 249.G3 punch - 3mm x 150mm.1 x 249.G4 punch - 4mm x 190mm. 1 x 249.G5 punch - 5mm x 200mm.1 x 249.G6 punch - 6mm x 210mm.1 x 249.G8 punch - 8mm x 216mm.1 x 249.G10 punch - 10mm x 230mm.

This compact set of engineering tools contains 6 essential marking and measuring tools. Supplied in a wooden storage case, the set contains the following tools: Faithfull FAIESMEASURE Engineers Marking Measuring Set 6 Piece comprises:3 x Precision Stainless Steel Squares 50mm (2in), 100mm (4in), 150mm (6in), accurate to BS939 Grade B standard.1 x Steel Centre Finder 38mm capacity.1 x Stainless Steel Rule 150mm (6in).1 x Scriber 135mm (5¼in).

The Boa Micro Grabit extractor is a precision instrument, designed for the electronics and precision engineering industries. It removes delicate screws and bolts in more restricted areas and the set combination will allow fast and efficient removal of all small size diameter screws and bolts. Great for fixing cameras, glasses, tech. equipment etc. Works with all standard variable drills. Fits: Micro R #56: Screw sizes 0-2 / Bolt size 56Micro R #8: Screw sizes 2-4 / Bolt size 8Micro R #10: Screw sizes 4-7 / Bolt size 10Micro R #12: Screw sizes 7-10 / Bolt size 12

The BOA Grabit - the worlds best-selling screw and bolt remover. The Grabit quickly and easily removes broken, damaged or embedded screws and bolts from wood, metal, plastic etc. It will work on all of the most popular screw head types. Simply burnish, flip the tool and extract. Compatible with all standard variable speed drills. Made from high-quality hardened steel, precision engineered for multiple use and maximum performance. Fits: Grabit #2: Screw sizes 8-10 / Bolt size 1/4inGrabit #3: Screw sizes 11-14 / Bolt size 5/16in

Faithfull Engineer's Squares Set supplied in a wooden storage case. Carefully crafted from high-quality tool steel, these squares are accurate to BS939 Grade B standard. The stock and blade are precision ground to ensure straightness and accuracy, and the spring steel blade is hardened and tempered for increased durability. Sizes: 50, 75, 100, 150mm

The Faithfull Feeler Gauge contains 20 blades that cover the sizes from 0.05mm to 1.00mm. The blades are 100mm long and made from hardened, tempered and polished steel. A knurled thumbscrew allows the blades to be locked in place. Feeler gauges are used to measure the size of small gaps between 2 objects that are in close proximity. Ideal for setting gaps between components in vehicle engines such as valve adjustment, setting distributors and checking spark plugs.

Dormer 14pc Set, features E500 straight flute taps and A002 TiN Coated Jobber Drills is ideal for a wide range of general purpose machining applications. It features the Dormer E500 straight flute taps and A002 TiN coated jobber drills. E500 Metric coarse straight flute taps: M3, M4, M5, M6, M8, M10 M12 Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. Tolerance: Class 2 for 6H Fit.Surface treatment: Bright.Material: HSS High Speed Steel.Chamfer No: 1,2 and 3, Serial no 4 and 5.Flute Geometry: Straight Flutes. A002 HSS-TiN Coated Jobber Drills : 2.5mm, 3.3mm, 4.2mm, 5.0mm, 6.8mm, 8.5mm and 10.2mm. General purpose drills, made from High Speed Steel with a Titanium Nitride coating for longer life, with good self centring capability on a wide range of materials. Particularly suitable for aluminium and other abrasive materials. Ideal for drilling wood and chipboard. Suitable for both hand and machine use. DIN338RN/BS328/ISO235.

The Ridgid Micro CD-100 Combustible Gas Detector provides simple and quick readings to identify the presence of combustible gases. Detects Methane, Propane, Butane, Ethanol, Ammonia, Hydrogen and many other combustible gases. With adjustable sensitivity, even low-levels of gases can be detected. Ideal for ensuring proper gas line installations, checking for maintenance and repair needs, or quickly pinpointing combustible gas leaks. The rugged ergonomic design makes it capable of withstanding jobsite rigour. Tri-Mode Detection™ provides visual, audible or vibration alert which can be adjusted for different environments. A 16in flexible probe allows location and detection of leak in hard-to-reach and confined spaces. Specifications: Detection Range: 0- 6,400ppm (Methane).Alarm Sensitivity: 40ppm (Methane).Calibration: Automatic.Power: 4 x AA batteries (supplied).Classifications: Class B, Division 1.

This Faithfull pH Meter is easy to use and an essential instrument for both the professional and keen gardening enthusiast, providing a quick, no fuss method of measuring the pH (acidity and alkalinity) value of soil.Knowing the pH value is very important and directly influences the health of plants, using this meter to provide an accurate reading will allow the pH level to be adjusted accordingly to best suit the plants being grown prior to planting.The meter can also be used to help identify the best growing environment, and area for growing outdoor plants, shrubs, vegetables, trees, and for improving, modifying soil in your garden.Features:Analogue needle Acid-Alkaline indicator.Accurate pH soil reading in 60 seconds.Ideal for fruit and vegetables.No batteries required. To change soil pH: A. To increase the pH value, lime should be added. Lime is a compound of calcium, or calcium and magnesium. Applied in the form of ground agricultural limestone, burnt lime or hydrated lime for the quickest result. B. To decrease the pH value use either aluminium sulphate or sulphur. Aluminium sulphate is the quickest acting as it will increase the acidity as soon as it dissolves into the soil.Quantities of additives will vary depending on the type of soil, consult a gardening book or professional gardener if further advice is needed.

The Faithfull Digital Lux / Light Meter is ideal for use in electro-optical sources, research teaching, industry inspection as well as agricultural research and illumination control. It can be used to assess and monitor indoor area light levels, such as greenhouses, warehouses and office space. This device is able to measure light from many different types of bulbs, ensuring high levels of accuracy throughout. It includes a light meter and light sensor and will work with fluorescent, metal halide, high-pressure sodium and incandescent sources. Supplied with battery, user manual and storage case. Specification: Range: 1-50,000 Lux in 3 ranges 2,000/20,000/50,000 LuxSampling Rate: approx. 2 times/secondSensor: Silicon photo-diode and filterEnvironment: Indoor operationAltitude: Up to 2000mCalibration: Standard incandescent lamp at 2854KPower: 1 x 9V PP3 battery (supplied)Dimensions: 192 x 67 x 44mmWeight: 198g

The IRWIN Vise-Grip locking sheet metal tool makes all kinds of bending, forming and crimping jobs on sheet metal easier. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release. Specification Length: 200mm (8in).Capacity: 78mm.

The IRWIN Quick-Grip Micro Clamps feature a patented ratcheting mechanism that provides variable clamping pressure. The quick-release trigger allows for fast and easy positioning and release, making this the ideal clamp for jobs in the workshop, house and garden. They have specially designed jaws with non-marking pads that can hold onto odd-shaped work pieces. Enhance your clamps with a wide range of Quick-Grip Clamp Accessories.

The Vaughan Mini Bar is an indispensable tool for prying, pulling and scraping. With a 'Shepherd's Crook' rocker head for maximum prying power and 3 bevelled nail slots. Ideal for opening paint tins and small leverage jobs. Made in the USA.

The Roughneck Paving Maul is fitted with a high density, cylindrical rubber head and 900mm (36in) fibreglass handle. Ideal for bedding heavy-duty slabs.

The Roughneck Gorilla Fencing Maul™ is ideal for driving home wooden fence posts. The large round striking face makes it much easier and safer than using a sledge hammer. It has a cast head with double round striking faces. The solid core, high density fibreglass handle is fitted with a polypropylene jacket for shock absorbency. The treble injected TPE soft-grip handle provides added comfort. The handle is fixed by threading through the head and hence offering an extremely strong and permanent fixing.

The Roughneck Demolition Lifting Bar increases safety, reducing the chance of injury. Ideal for lifting floorboards, removing ceiling boards, breaking pallets, removing roofing laths, lifting heavy objects and all types of demolition work. Also for lifting up large items (e.g slabs) with less risk of items dropping when prising up. The tusks are hardened and tempered and the heel is rounded to distribute pressure over a larger area.

The Roughneck Ground Breaking Bar is ideal for use in locations and jobs where a normal crowbar is not sufficient or a pick not accurate enough. This heavy-duty bar is made up of an inner solid crowbar with a chisel tip, drop forged, heat treated and hardened. A weight slides up and down the central bar and exerts blows on the target material. It is ideal for breaking up hard ground, rocks, concrete slabs, asphalt etc. For extra impact, the end stopper can be removed to allow the weight to drop from a greater height.

The Roughneck Shock Absorbing Tamper has a reinforced cast iron head with a perfectly flat face and an all-steel handle. There is a rubber pad built-in between the handle and the head to absorb shock and help eliminate user fatigue.

The Roughneck Door and Board Lifter is designed to lift, swivel and position with just one foot. It is Ideal for use by carpenters, glaziers, painters and locksmiths, it can lift and manoeuvre doors, large panels and boards of up to 75kg/165lbs. It features a nonslip pad for enhanced grip. Nonslip pads x3Max. load 75kg/165lbsLift Height 65mm/2½ in

This Roughneck Ultimate Multifunction Mortar Gun is supplied with: 2 x Black Nozzles (large and small) for repointing or filling gaps in slabs2 x White Nozzles for grouting or using with glue sausage1 x Dome-Shaped Plunger for use with glue sausage2 x Plungers with Cut for use with mortar2 x Plungers without Cut for use with grout or bulk loading1 x Spanner1 x Instruction booklet

The Roughneck Brick Mortar Gun is ideal for re-pointing walls, filling gaps in patio slabs and for grouting floor and wall tiles. Professional quality ratchet mechanism with 10:1 thrust ratio. 750ml Aluminium barrel. Supplied with:1 x Scoop, 1 x Straight Nozzle, 1 x Angle Nozzle and 1 x Grouting Nozzle.

This Roughneck board carrier is a safe and convenient way to carry plasterboards, wood panels and glass. Promoting a good handling technique whilst lifting heavy loads will help avoid back injury. This strong yet lightweight aid is suitable for loads up to 80kg/176lbs. The handle has a comfort grip for user comfort.

The Roughneck Concrete Chisel is made from drop forged steel, heat treated and tempered. It has a black powder coated finish. The 4mm pointed tip is ideal for breaking concrete slabs or making a hole in a variety of materials. Specification End Type: 4mm Point.Size: 300 x 25mm (12 x 1in).

Scutch combs are designed to fit into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the comb holder being used. These Roughneck Scutch Combs are made from strong carbon steel, which is zinc coated for increased resistance to corrosion. They are contractor grade and come with a lifetime guarantee. Size: 25mm (1 inch).Pack of 5

These Roughneck Scutch Chisels are manufactured from drop forged, heat treated steel for strength and durability. They are powder coated for greater corrosion resistance. They are ideal for preparing masonry and stone when used with comb or chisel bits, they can also be used for chasing out channels in brick, concrete or stone walls Use in conjunction with ROU31996 Scutch Combs. Size: 25 x 203mm/ 1 x 8 inch

Recommended for larger jobs like roofing and road works. 350mm Long Neck Tube.

The Sievert Pro 86 Handle is a single valved handle mainly for smaller burners. The spindle and valve are designed to give a very exact and quick flame setting. It has an ergonomicly designed plastic composite handle, and all-metal parts. Ideal for Jewellers and other precison work. It is supplied without a hose nipple, and the hose connection is BSP 3/8in LH.

The Promatic Handle is made from a plastic composite reinforced with 30% glass for maximum durability. Piezo igniton with instant trigger on/off function. It has a bayonet fitting for burners and swivelling hose connections to avoid hose drag. It also has a combined suspension hook and foot stand, and valve for precise flame setting. Delivered without hose nipple. Hose connection 3/8 BSP LH. Working pressure, bar 1.5 to 4 bar. Weight: 290g.Length: 180mm.Height: 80mm.

This Priory Double-Ended Scaffold Spanner is suitable for use with all popular scaffold fittings used within the U.K. It is manufactured to surpass the performance test BS2558:1954 with a swing over handle and a zinc plate finish. The sockets locate directly onto the handle relieving the rivet of stress. The sockets are hardened and stress relieved to ensure they retain their shape. Specifications: Socket Size: 7/16 and 1/2in.Length: 230mm.